Jump to content
Unfortunately we had to take download section back offline temporarily. We should have it working normally soon.

LotarisPin - Standard Size - Two Monitors (40/26)


freezy

Recommended Posts

one thing to take into account.. when Freezy started his excellent build the Virtual output boards from Zeb were not available..

these make the wiring a more simple solution (as you don't need separate 24, 12 and 5v psus for the items) because you can run everything off of a single ATX psi.

i had the same problem when i started, i literally spent hours pouring over the pinball electrical 101 guide, working out what relays and resistors i needed for the job. But because I've taken so long to get to the wiring stage, i have all the psu's spare and 2 versions of Zebs excellent boards..

but i now have a simple plug and play solution...

Link to comment
Share on other sites

  • 2 years later...
  • Replies 127
  • Created
  • Last Reply
  • 11 months later...

Hi Freezy,

Fantastic, inspiring build. Really hoping my project comes close to this.

Do you still have the sketch up files available? The link on the front page appears to be broken.

Would really help me research my cab design.

 

Many thanks, 

 

Steve.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...