Jump to content

Recommended Posts

hi

i can't download the files on page 13, i'm on 1.61.10

can someone repost them

 

thank

Share this post


Link to post
Share on other sites

Same. None of the files are available anymore. What's going on with this site? Finally got around to setting up my pinball systems but I guess I picked a bad time to do so. I have version 1.70.6. I'm assuming the module won't work with it but I would like to have a go at it and try to modify it.

Share this post


Link to post
Share on other sites

Hello everyone I AM NEW HERE  I wanted to know if anyone has heard of the TPA free camera mod. I wanted to know if there is any way to make this work with the non steam version. It seems that when you say the non steam version some people take offense to it especially in the pinball community.

No EX has made this program but it cant be used unless online with steam, he says you can download a version a create an offline file but if you go into the ini settins and change the path you get the good old nag screen. I know that for pinball fx3 with steam there is an ini you can put in the steam folder that is created ..even with the offline version. it is user/public/public doc//codex/ steam. I wanted to know if there was another ini that can be used for pinball arcade in that same folder. each system creates a numbered folder fx3/pinball arcade/ziacarri pinball.

Or if there is a way to make a mod of the TPA free camera mod, to work without the need for stream.

Share this post


Link to post
Share on other sites

Can someone post the files from JVieigas? Especially the module he created.

Share this post


Link to post
Share on other sites
On 7/15/2019 at 5:24 AM, annunaki12 said:

Thanks, but they can''t be downloaded. Says "Page you requested does not exist". Seems to be a problem with this site in general. Seems like most files attached to these forums suffer from the same issue.

  • Like 1

Share this post


Link to post
Share on other sites
On 7/25/2015 at 7:21 PM, Metalzoic said:

UWAGA : Ten moduł współpracuje z The Pinball Arcade do wersji 1.50.10 ( opublikowana 13.06.2016). Farsight całkowicie zmienił interfejs użytkownika gry ( bardzo na gorsze ) w wersji 1.50.11 ( wydanej 17.06.2016 ), więc ten moduł nie będzie już działał od tej wersji. Jeśli korzystasz z wersji Steam i chcesz pozostać w tej wersji, aby korzystać z tego modułu, musisz zachować kopię zapasową wersji 1.50.10 gry, ponieważ Steam automatycznie zaktualizuje i nadpisze twoje pliki. Z kopii zapasowej możesz przywrócić do 1.50.10, jeśli chcesz. Jeśli Twój już się zaktualizował i nie zrobiłeś już kopii zapasowej, jesteś spieprzony.

TEN MODUŁ NIE DZIAŁA Z WERSJAMI NIŻSZEJ NIŻ 1.50.10

 

Right away, I mean, I have to choose either:
  98 tables but I can not have the table automatically started by HS, RL
  or have the ability to run tables automatically but have fewer pff tables, f *** Farsight
there is no solution for any other module etc  ??

 

Share this post


Link to post
Share on other sites
On 7/21/2019 at 12:30 PM, ninja2bceen said:

This module needs to be updated to at least 1.70.8


Sent from my iPhone using Tapatalk

That's fine but why can't any files posted in these forums be downloaded from this site? Even private massages with attachment give me the same "The page you requested does not exist"

Share this post


Link to post
Share on other sites

There was a massive upgrade to the site recently so I suspect that may have to do with it. I’d check in with thatman or gigapig or submit a ticket if all the links are busted


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
Which version is this module for?

Hmm I’ll have to try this out and see if it launches into the specific table. I’m not sure I’ve got that working since the gui change update on the game


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

did you get this working?    i downloaded the module from the mega link..     but in the module i dont see anything about "nrcol := 8 ; How many columns are shown in your screen ?"     its just jumping down the list   i also had to edit it to select the right thing to get to my tables 

 

kinda stumped atm

 

here the module with the edits i made.. but still cant get it right

any help would be LOVE!  LOL

Pinball Arcade.ahk

Share this post


Link to post
Share on other sites

Ya I’m kinda in the same boat. I figured I would work on my leds and come back to this update


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
On 8/26/2019 at 4:49 PM, ninja2bceen said:

Ya I’m kinda in the same boat. I figured I would work on my leds and come back to this update


Sent from my iPhone using Tapatalk

what version are you using?

Share this post


Link to post
Share on other sites
what version are you using?

The one with like 65 tables. I’ve got 100 awaiting and I think there is a work around using some third party app but they have not yet released the version that supports the 100 table update. They are usually a few months behind


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
On 8/13/2019 at 10:03 AM, ninja2bceen said:


Hmm I’ll have to try this out and see if it launches into the specific table. I’m not sure I’ve got that working since the gui change update on the game


Sent from my iPhone using Tapatalk

I quite updating the module and this topic, my tutorial etc... back when Farsight came out with the new, lame gui

Share this post


Link to post
Share on other sites

Yes that’s right. If you are up for the challenge, there is a 100 table update which has all previous tables. After this update rights were taken away for some tables. I wouldn’t mind sending you the set if you can make a matching module


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
On 9/5/2019 at 7:55 AM, ninja2bceen said:

Yes that’s right. If you are up for the challenge, there is a 100 table update which has all previous tables. After this update rights were taken away for some tables. I wouldn’t mind sending you the set if you can make a matching module


Sent from my iPhone using Tapatalk

or even teach us the ways .. lol     id be willing to throw a few beers into the paypal for sure

Share this post


Link to post
Share on other sites

I’m aware of one method using another app but it needs to be updated. The mod updates basically once a month so the next update I see on it, I’m going to try it again. If it works there will be a tutorial on my YouTube channel planet geekdom


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By thatman84
      Please note my knowledge of this system does not run deep but everything here works and plays fine.
      What is it?
      Capcom Play System III or CPS-3 is an arcade system board that was first used by Capcom in 1996 with the arcade game Red Earth. It was the second successor to the CP System arcade hardware, following the CP System II. It would be the last proprietary system board Capcom would produce before moving on to the Dreamcast-based Naomi platform.
      How to emulate in Android (Shield TV)
      Quick and simple way is with the FBA core of RetroArch and matching FBA romset.
      At time of writing current versions are:-
      Core:- FB Alpha v0.2.97.42 (commit 6b7a701)
      FBA:- 0.2.97.42 (9 July 2017)
      Other options are MAME core in RetroArch or MAME4Droid reloaded (0.139mame romset). I believe the CHD files are needed for some games and with MAME4Droid, at least,  I had to "install" the game when it 1st launched in the emulator. That process took about 20-30mins and not all worked. Redearth was one I tested and "installed".
      Games
      JoJo no Kimyouna Bouken: Miraie no Isan (Japan 990913) = (jojoba.zip)
      JoJo's Venture (USA 990108) = (jojo.zip)
      Red Earth (Euro 961121) = (redearth.zip)
      Street Fighter III 2nd Impact: Giant Attack (USA 970930) = (sfiii2.zip)
      Street Fighter III 3rd Strike: Fight for the Future (EUR 990608) = (sfiii3.zip)
      Street Fighter III: New Generation (USA 970204) = (sfiii.zip)
       
      Note:-
      I replaced this entry in the official database with the european version as I could not get it to launch in FBA.
      Street Fighter III 3rd Strike: Fight for the Future (USA 990608) = (sfiii3u.zip)
      EDIT:- USA version is working with RetroArch core version 0.2.97.44. Make sure you have the correct RomSet version
      Setup Steps...
      1.  Open RetroArch and download the Arcade (FA Alpha) core.
                                     Main Menu -> Online Updater -> Core Updater

      1a. Transfer your games to your prefered location (You only need the six zip files listed in the database and above)

      2. Add the "Capcom Play System III" system to your Hyperspin setup with HyperHQ on a PC and transfer the files/folder to your device or by manually creating all the relevent folders to your device. (Download at bottom of guide)
      3. Add Capcom Play SYstem III to your Main Menu.xml or Main Menu_Android.xml
      4. Add these lines to your Capcom Play System III.ini file found in Hyperspin/Settings/ or Hyperspin/Settings_Android/
      exe=com.retroarch/com.retroarch.browser.retroactivity.RetroActivityFuture
      romextension=zip
      parameters=cores/fbalpha_libretro_android.so
       
      PLAY SOME STREET FIGHTER .......................
       
      Extra Notes:-
      Under the FB Alpha "Quick Menu -> Options" you can select between different regions. Choosing a different region will give you the different loading screens along with other things I'm not sure about.
      Street Fighter III 3rd Strike (Default)Euro

      Street Fighter III 3rd Strike (USA)

       
      ANDROID MEDIA PACK AND DATABASE (Get your videos from emumovies.com)
      Hyperspin-CPS3Android.zip
       
       
    • By thatman84
      (FYI having trouble with upping some screenshots and the new formatting so please excuse the wierd format)
      Converting 16x9 Themes for Hyperspin Android
      List of theme animation compatibility
      https://drive.google.com/folderview?id=1-8Ofa_GrAdnQ22nf7W7QYVeQoKBQxA_-
      (I am in NO way competent with artwork resolutions but my method works and looks good to me)
      Why...
      Because sometimes that theme you really liked just doesn’t display correctly 
      The main reason for theme problems is the use of animation and scripting of the .swf assets in the “theme”.zip
      (It’s best to replace themes that cause Hyperspin to crash out, but you can try to convert them)
       What’s covered...
             1.      Extract PNG assets from swf files
             2.      Reduce HQ artwork to be compatible with Hyperspin
             3.      Further reduce artwork width to allow for Hyperspin 4x3 -> 16x9 stretching
             4.      Recompile your theme
       
      What is Needed:
      Update on resizing tool.
            Fotosizer is now advised against because of the compression/quality loss it causes.
      pPlease use Photoshop or this program recommended by @IceLancer https://sourceforge.net/projects/easyimagesizer/?source=typ_redirect
      A    A  Fotosizer (http://www.fotosizer.com/) batch resize image files
              B.     Flash Decompiler (https://www.free-dec...flash/download/) extract png’s from swf
              C.     Time and Themes
       I have done a little testing for Main Menu themes. This spreadsheet shows what I have tested and its Android compatibility status. The sheet has download section links for all themes I have tried.
       
       
      Let’s get to it... 
       
      So grab a theme zip you want to play with and Unzip it. Any 16x9 Main Menu, Game or System Default theme will do.
       
       
      BakerMan provided me a guide to extracting the PNG’s from SWF but it has since been lost. 
      These are the steps
              1.      Open JPEXS once downloaded and installed from link above
              2.      Click on the “Open” tab and browse to the offending .swf file from your unzipped theme
       
           SCREENSHOT
      3.     
       

       

             3.      Right click on “Images” on the left and click “Export Selection”
      (At this step you may find multiple images. If these images are only parts of one image, say the arms and legs of a character, you will have to lose that image completely from the theme or replace it with another one)
       
      SCREENSHOT2
             4.      Click “ok” to PNG file type then choose a location for the exported images (Default is Desktop. Only export one at a time and  then move the PNG out of the output folder as it overwrites each one if not)
       
       
      SCREENSHOT3
             5.      Now browse to that Output location and you will find your PNG’s in an “images” folder.
       

       
      You are now ready for phase 2 – Resizing the images
      Note, fotosizer does cause a reduction in artwork quality. If your sensitive to this you may want to use another method. (If you know of a better program please comment) I only run a 37' screen and don't mind myself.
      (Resizing Artwork is covered comprehensively by Avar in his tutorials found HERE)
      Open Fotosizer Add the Artwork that was converted to PNG Reduce the images to 68% KEEP MAINTAIN ASPECT RATIO TICKED (this is the best size for the ones I have done)  
              4.       Move the right side settings bar down and select an Output Folder
       

      5   Remove that Artwork from Fotosizer
      6.   Add the newly resized artwork back into Fotosizer
      7.   Reduce the Width to 75% (to allow HS to stretch it back when its loaded)
      8.   UNTICK MAINTAIN ASPECT RATIO
       
             9.   Now add this finished art back into the theme folder and zip it up again
            
             10.       Name the zip file the same as you have it in the “Main Menu.xml” database
       
      Final Thoughts...
       
       
      Now when you try this theme out you may find the artwork has slightly changed location. If so adjust the Artwork positions in the theme.xml file within the theme.zip OR load it into Hypertheme and adjust it as required
       
       
      Hope this helps someone.
       
       
      HS Android Theme Animations.txt
    • By ninja2bceen
      Ha not going anywhere but wanted to put in the plug that I’m going to create some tutorials on random things hyperspin and maybe pinball. The channel I’ve created is below, please let me know if you have a specific topic to get covered. Just made one around randomized intro videos
       
       Planet Geekdom
       
       https://youtube.com/channel/UCdcby-s2GwriaOHGmVC2vGA?sub_confirmation=1
       
      *If you do the facebook thing, find me on the group Hyperspin Arcade Users Worldwide
      https://www.facebook.com/groups/581676831988120/?ref=group_header
       
      Sent from my iPhone using Tapatalk
       
       
       
       
    • By thatman84
      This is the start of the WIP guide and Amiga Project thread
      DONT REPLY TO THIS THREAD
      REPLY TO THIS ONE(clicky)
       
      For now this will become a tempory guide to UAE4arm setup with the Ultimate Amiga Raspberry Pi Project a helpful source of information in google
      Step 1 - Install Uae4arm (beta)
      You need to follow this link to sign up to be a beta tester to gain access to the apk that can launch games directly from Hyperspin.
      https://play.google.com/apps/testing/atua.anddev.uae4arm
      Link above taken from the English Amiga Board and the post below
      http://eab.abime.net/showpost.php?p=1158186&postcount=349
       
      Step 2 - Install Kickstarts
      WIP
       
      Database taken from this thread post
       
      More to follow
       
      Amiberry Android progress threads
      https://github.com/midwan/amiberry/issues/206
      https://github.com/midwan/amiberry/issues/241
×
×
  • Create New...