Jump to content
HyperSync, HyperList and FTP are now back online ×

Archived

This topic is now archived and is closed to further replies.

nicco84

Hibernate without closing hyperspin!!

Recommended Posts

I think one of the best feature hyperspin needs is an hibernate action whitout close hyperspin.

Now I have to set hibernate in windows after 45 minutes of non-playing.

You'll loose the intro of hyperspin but it will be great to have windows running and hyperspin ready

Share this post


Link to post
Share on other sites

Never tried it as I dont do hibernate. But Im sure you can go into you control panel/poweroptions/youractive profile and select what little thing you want to be closed down and when. Not so much programs but you HW. Im sure if you left your HD powered or another configuration it would "in theory" jump straight back into the action once active again.

Again, this is just thoery. Although you could make a new app...Hypernate... hehehe, sorry I couldnt resist!

Share this post


Link to post
Share on other sites

Ahah it will be great open hypernate! Jokes apart I already open a thread with your solutions http://www.hyperspin-fe.com/forum/showthread.php?33858-Hibernate-instead-of-shutdown-with-hyperspin-running! And we had already talk about hibernate by inactivity or hibernat by combo buttons... But no one of those solutions could be compared by a directly hibernate through hyperspin

Share this post


Link to post
Share on other sites

don't you just setup your power button one the cabinet to go into hibernate mode when pressed? it always works on mine, I never close hyperspin.

Share this post


Link to post
Share on other sites

That's a very good point! Do you need to restart the PC occasionally or is it happy to go in and out of hibernation repeatedly?

Share this post


Link to post
Share on other sites

it seems to work 90% of the time, but I only turn on the machine every 2 weeks or so, so about every 4 or 5 months I restart the machine. seems to work better if you use it more often.

Share this post


Link to post
Share on other sites

  • Similar Content

    • By EpicGod
      Good Morning,
      I've been a member on here for a good part of 7 years. I have a Hyperspin arcade machine running on Windows 7 however, everything I have is outdated - MAME, DAPHNE, FUTURE PINBALL, etc. I need to have the Hyperspin, roms and its components updated. I would like to keep Windows 7 installed if possible. I'd like to hire someone on here to properly configure and update all of my stuff that I use. I've got way to much on my plate to do it myself as I've been taking care of my son who is recovering from COVID.

      If anyone is interested and knows EXACTLY what they're doing, drop me a message.
      Be well and stay safe from COVID-19.
       
      Thanks,
      Epic
    • By therourke
      I have a fully working build for Commodore Amiga now on my NVIDEA Shield (2017 model). It took me a good while to get it up and running.

      I thought it might be useful to post an 'all in one place' tutorial. Thanks go to Honosuseri over in this post for convincing me it was possible.
      Commodore Amiga is infamously painful to configure on any and all emulation setups. Retroarch takes the pain out of some of this, since we don't need individual .uae files for every single game now. But there are still some hoops to jump through.
      Onto the tutorial
       
      1. Find/setup your own Hyperspin
      Hyperspin is free and available on this very website. Install the app on your NVIDEA Shield, and compile your roms and Hyperspin setup on an appropriately sized external harddrive/USB.
      As for the ROMs, videos, wheel images and all the aesthetic stuff you need to get your setup running, you will have to source that yourselves. The Hyperspin website is good for some material, emumovies for videos, and Google and Archive dot org for everything in between. 
      For this setup I used a properly named romset for Commodore Amiga in .zip format, but you can also use .lha or .hdf format. .lha is smaller in size, but all of these run pretty much the same on Retroarch now. 
      There is no need for those pesky .uae files anymore!!!!!!!!!!
      Once you have all your roms, you will need to allocate them to the right videos and images and build your .xml database. The info for how to do this is available elsewhere on this very website. I used HyperspinChecker to do this.
      Now, onto the part where we make Hyperspin and Retroarch play nicely so you can finally play your Commodore Amiga games 
      2. WHDLoad and kickrom setup (bios file preparation)
      I obviously can't link to kickroms or WHDload.hdf and some other stuff, but Google is your friend.
      You can get kickroms legally as part of the Amiga Forever app on Google Play Store for only £1.79.
      You ABSOLUTELY NEED to get hold of these EXACT kickroms:
      kick34005.A500 kick37175.A500 kick40063.A600 kick40068.A1200 Some info on kickrom file names and how to match them up correctly can be found here.
      MAKE SURE THE FILENAMES ARE PRECISE! I left one of those As in lowercase and Retroarch didn't like it.
      You also need a properly prepared WHDLoad.hdf file: ADD THESE EXACT KICKROMS TO YOUR WHDload.hdf file (guide to do this here using ADF Opus)
      Copy all these file to the external drive you are keeping your Hyperspin setup on (I made a 'bios' folder in mine for safe keeping).
      3. Retroarch Setup
      Install the latest Retroarch on your NVIDEA Shield (probably works on other Android setups too). You can do this through the Google Play store, but as of writing this, version 1.8.9_GIT definitely works.
      You will need to make sure you have setup a way to load the Retroarch main menu from within games. Go to 'Settings', 'Input', 'Hotkeys' and set the 'Menu Toggle Gamepad Combo' to something like 'Select + Start'.
      Download the latest Commodore - Amiga (P-UAE) core from within Retroarch (use 'Online Updater' menu)
      Now 'Load Core' and choose the P-UAE Core. Start the core, then immediately go back to the Retroarch menu (Start + Select). From the 'Quickmenu' select 'Options'. Change the 'Model' here to something with plenty of power like the 'A1200 (2MB + 8MB)'. Scroll down to 'Global Boot HD' and 'WHDLoad Support' and make sure both of these are marked as 'Files'.
      One other thing from within Retroarch: having a way to 'Quit' from within games is useful for Hyperspin. So go to 'Settings', 'Hotkeys' choose a button for 'Quit Retroarch' (I use the click of my Left Analogue, but anything will do). You may also need to mess around with button mappings, but most of this should work fine if you have a NVIDEA Shield compatible gamepad. Mouse and keyboard are also, obviously, nice additions for Amiga stuff.
      Go back to 'Quick Menu', 'Overrides' and select 'Save Core Overrides' to make sure your Retroarch Amiga setup is saved.
      Lastly, and very importantly...
      Leave Retroarch. You will need an Android directory viewing program like 'FX File Explorer' for this step. Copy the EXACT kickroms listed above and the WHDload.hdf file you created into the /Retroarch/System/ folder on the INTERNAL drive of the NVIDEA Shield.
      4. Commodore Amiga.ini Commands
      In your Hyperspin setup you should now have all your roms, videos, images, menu setup, and a Commodore Amiga.xml database file all neat and tidy.
      You now need to get Hyperspin to talk to Retroarch properly.
      Back on your PC, load your Hyperspin folder and go to the /Settings_Android/ folder.
      Create or open the Commodore Amiga.ini in a text editor. Most of the stuff in here will be the same as other systems, but you can find my ini file attached here.
      Make sure the top lines in your ini read like this:
      [exe info] path=H:\hyperspin\emulators\Commodore Amiga\ rompath=Roms/Commodore Amiga/roms userompath=true exe=com.retroarch/com.retroarch.browser.retroactivity.RetroActivityFuture romextension=zip,hdf,lha,HDF,ZIP,LHA parameters=cores/puae_libretro_android.so searchsubfolders=false pcgame=false winstate=HIDDEN hyperlaunch=true Each of these lines corresponds to your setup. So if you have your roms folder somewhere else, you need to tell the file. If you are ONLY using .zip versions of your roms, then you don't need the entire 'romextension=zip,hdf,lha,HDF,ZIP,LHA'  line - you can change this to just 'romextension=zip' and it will work fine. (But my line here covers all the possible rom extensions, so you can leave it). The 'exe' and 'parameters' entries are really important, as this tells Hyperspin to load Retroarch, and then Retroarch which core to load for Commodore Amiga.
      Save your file, and hook your Hyperspin external drive back to your NVIDEA Shield.
      5. Play some games
      Everything *should* be working now. If you are having problems with videos and roms matching up, or entries showing in the Amiga menu on your Hyperspin, then that is an issue with your original setup. There are many tutorials out there.
      I can vouch that THIS EXACT setup works great, and loads and plays most Amiga games I have thrown at it without too many glitches.
      6. Now, please answer me a Q 
      When using an external mouse in Retroarch and playing a game like Lemmings, I get TWO cursors - the in game Lemmings cursor, and the NVIDEA Shield arrow.
      Does anyone know how to get rid of this for good? Thanks
      Commodore Amiga.ini
    • By fettesLama
      Hi,
      ich habe einen Wireless Xbox One Controller und 1einen Wireless "Bartop" Controller, ein "Hori Fighten Stick"
      Das Problem ist:
      Wenn nur der Xbox One Controller verbunden ist geht sein Analog Stick im HyperSpin Wheel (um hoch und runter zu gehen),aber wenn Hori Stick also der zweite verbunden ist geht nur der Hori Fighting Stick zum Hoch und runter gehen im HyperSpin Wheel. Die Buttons (also A, B ,... ) beim Xbox One Controller gehen aber trotzdem noch.
      Anmerkung: Der Hori Fighten Stick hat als Input für Up,Down,....POV
      Schon mal Danke im Voraus
    • By wildpumpk1n
      Hello guys,
      I'm working on a Tate build with Hyperspin for candy 15khz cab. 
      I made it for used with jammAsd or ipac2 or something who use a keyboard encoder.
      I was thinking to find solution for people who will used it with a 1player panel with 3buttons and start.
       
      Usually the keybinding is 
      Start p1 . 1
      Button 1 . Lctrl
      Button 2 . Lalt
      Button 3. Space
      Button 4 . Shift
       
      My trouble is hyperhq don't recognize the alt key. My thought was to ask rocketlauncher to use an AHK script to change lalt::k
      No problem, it works. If I start it manually, Hyperspin recognize my button2 (lalt) as a k.
      I change few thing in rocketlauncher asking it to use AHK I made under RL Hyperspin.ahk. I select external in settings, etc. 
      But its not working, I didn't see the script in my task bar ?
      As I used a lot of ahk keymapper for pc Games in this build I don't want to start it with hyperhq at the start of Hyperspin, maybe it will be the mess. 
       
      If you have any Idea, thanks guys ?
      If you want to have a look to the build 
       
    • By capnclaw
      This is my ICade mod using USB encoder for the joystick and buttons with a Dell micro PC in the back end with USB volume knob. Powered by Windows 10, Hyper-Spin, and Rocket-Launcher with Atari 2600, MAME, Nintendo Entertainment System, and Sega Genesis emulators and roms set up. The display is a 4:3 8 inch Neewar monitor which I purchased off of Amazon. I have acrylic glass behind my wooden bezel which I drilled out holes for monitor buttons in both the bezel and glass. All artwork was created by me in Photoshop and printed on adhesive vinyl. The marquee was made with the same acrylic glass and has an 8 inch LED glass enclosure with remote made for small fish aquariums I purchased off of Amazon as well. All wood paneling is MDF material and was cut and drilled via a Black and Decker drill with spade bits and a small Dremel band saw. I mostly used gorilla glue to piece everything together. I used Behr Marquee 2 in 1 primer and paint to paint the MDF material. The Hyper-Spin intro video was created by me using open source and free program Open Shot Video Editing. It took me roughly 2 months to complete from start to finish in between work and my family lol. I am so glad I did it though I am so pleased and happy with the outcome. A match made in Heaven! MY favorite band KISS (original members) and my favorite hobby retro arcade. I absolutely love it!
      Link to Videos
      KISS Arcade Boot UP (Short)
      KISS Arcade Boot Up (Long)
      KISS Arcade In Action (Wrestle-Fest by Technos)
       
       
       
       








×
×
  • Create New...