Jump to content
FlightRisk

Does Hypespin have to be installed off root?

Recommended Posts

I am trying to configure a retroarch -> rocketlauncher -> hyperspin setup. I will use RA for most of my emulation, but might want a different MAME version and use that outside of retroarch (so 2 or 3 emulators other than RA). I was thinking to keep them all separate and just point to the files. Is that acceptable? Ideally I would want something like this:

c:\arcade
  |__\Hyperspin
  |__\Rocketlauncher
  |__\Retroarch
  |__\roms
     |__\Arcade
     |__\snes

I'm still fleshing it out. Can I do this? I also would like to share roms so that I could have retroarch use them, but use another emulator outside RA that isn't libretro to use them too.

Share this post


Link to post
Share on other sites

Yep put them where you like just keep each in there own folders like in your example. Maybe put Retroarch in an Emulators folder.

Share this post


Link to post
Share on other sites

And please only create one thread per question as it just clutters the forum and I have to delete them.

Share this post


Link to post
Share on other sites

Just want to make sure I understand what you are asking me about forum rules. Are you saying to only ask one question in a topic, or as you worded it and I initially understood it, "only create on thread per question"? As in don't ask the same question in multiple places on the forum. Not sure if you were just giving me a heads up since you may have seen that was my first post on the forums, or if you thought I posted this question somewhere else. BTW, I love gigapig and Qbert ;)

  • Like 1

Share this post


Link to post
Share on other sites

You had created the same question twice in different threads which some people do if they don't know where to post or if they don't get an answer. 

You may have just submitted twice by accident of course. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By DrSoupants
      Dear Hyperspin Community. 
      Before I go any further, can I please apologise for posting this request for information. I have no doubt that this has been covered thousands of times on thousands of posts on this website and I am indeed sorry. Feel free to scream at me profusely and use a range of poo emojis to communicate your frustration with me. I guess I'm a little overwhelmed with all of the content and I'm a bit unsure where to start. I'm definitely new to Hyperspin and need some help. 
      I have an Nvidia Shield, complete rom packs (at least I think they're complete) for a range of consoles, have the Retroarch emulator working and have a range of other emulators to play all of the games I want. I have a 2TB hard drive that am using as shared (or emulated) storage device and this is dedicated to the shield (non-removable). Ok......this is where you get pissed. 
      1.) Hyperspin tells me "Warning.....attempting to launch missing rom". Because my HD is emulated the path in ES explorer reads: 'storage/emulated/0/hyperspin/emulators ( …….then all of the console folders (eg: MAME)……. then all the rom folder)'.  Roms are placed in this folder. Can someone please tell me what I need to write in the individual setting file (eg: Nintendo 64.ini)  as I have had no luck at all with any of the games on the Hyperspin interface. I believe this to be my major problem. 
      2.) This is where you're really going to get the shits. I downloaded the base pack for the Nvidia Shield (from the Hyperspin site) and the start menu is great. When I enter a console I have a warning triangle telling me "Video Previews available at emumovies.com". How do I sinc the videos with the individual menus (I think they are referred to as 'systems' but I have no idea how to install these)???????? Soooo...……..where can I find these and how and where do I install them??
      3.) I believe that the fonts and images associated with roms are called 'wheels'. I have downloaded a few of these but how would I install these on the shield? 
      Basically, what I'm asking is...……... how can I setup Hyperspin on the Shield using a shared storage device so that it kicks some serious ass. 
      A huge thank you for anyone that can help me. Feel free to kick my ass in the comments but I've already done that over the past couple of weeks so I'm well ahead of you.
      Thank you so much Hyperspin and hope to hear from you soon. 
      Soup Pants. 
    • By ghutch92
      I will try to keep this guide up to date with the latest versions of HyperSpin and RocketLauncher. Also I'm adverse to making videos, because I don't want to make a new video every time something is updated, I find it easier just to edit a pic and text guide then recording a new video and editing links.

      All guides will assume you know how to navigate files and folders in windows.

      Translations
      Español - Admoroux


      This is for a new install. I'm assuming you know your way around folders and files in windows
      To download HyperSpin first you need to get the necessary support files from version 1.3.3 http://www.hyperspin-fe.com/files/file/5599-hyperspin-133-full-install/ and then overwrite with the contents from the beta http://www.hyperspin-fe.com/files/file/7500-hyperspin-14/
      I'm gonna use the C drive in the examples. Any drive letter is ok Now extract the contents of the download to a HyperSpin folder on the root of your drive. Example: C:\HyperSpin
      The path to your HyperSpin.exe should now be C:\HyperSpin\HyperSpin.exe Now you need to get RocketLauncher which is a fork of HyperLaunch, but with more active development. Download it here. http://www.rlauncher.com/forum/downloads.php?do=file&id=1. The archive (zip) password is www.rlauncher.com Extract Rocketlauncher into a RocketLauncher folder on the root of your drive (C:\RocketLauncher) and make sure the path to RocketLauncher.exe is C:\RocketLauncher\RocketLauncher.exe and NOT C:\RocketLauncher\RocketLauncher\RocketLauncher.exe Get back in your HyperSpin folder. This time we are gonna do some manual ini editing . Open your Settings folder in your HyperSpin folder C:\HyperSpin\Settings. Find the file named Settings.ini, open it in notepad. You should see at the top a line that reads [Main]. Right up under the [Main] line add Hyperlaunch_Path= C:\RocketLauncher\RocketLauncher.exe Open your RocketLauncher folder (C:\RocketLauncher), now look for the RocketLauncherUI folder open it and then open RocketLauncherUI.exe. If you are having trouble opening RocketLauncherUI and you get some message about failing to initialize, you will need to download Microsoft .NET Framework 4.0 to get RocketLauncherUI to work. You will be greeted with a prompt asking you to update. Choose yes. Choose 'Latest' in the dropdown. Click on Check Updates at the bottom of the window. Wait for it to finish and then click Apply Updates. Close the update window. You can update in the future using the update button in the RocketLauncherUI tab (the update button looks like a globe with arrows.) You're thinking wow, so many settings this is too complicated. Well that's your fault for wanting lots of customization . RocketLauncherUI will probably restart wait for RocketLauncherUI to restart and then close RocketLauncherUI. Open your RocketLauncher folder (C:\RocketLauncher), now look for the Settings folder, open it and then rename Global Emulators (example).ini to Global Emulators.ini (Make sure you can see the extension: Known Extensions Are Set to Show) If there is already a file called Global Emulators.ini replace it with the example one. Open your RocketLauncher folder (C:\RocketLauncher), now look for the RocketLauncherUI folder open it and then open RocketLauncherUI.exe Look for the big tab on the right with the RocketLauncherUI image and click on it. Now look for a smaller tab called "Frontends" beneath the row of big tabs and click on it Click the green + under the small tabs and add a new frontend (here you can add different frontends like gamex or kodi). In the popup window titled Add Frontend: for the first blank, set the name to HyperSpin for the second blank, Click the Magnifying glass to the right and locate your HyperSpin.exe application. (C:\HyperSpin\Hyperspin.exe which should look like ..\..\HyperSpin.exe if you are following the guide) for the RocketLauncherUI plugin, choose Hyperspin in the dropdown box. for the RocketLauncher plugin, choose Hyperspin in the dropdown box. click on the button that looks like a blue floppy disk to save, if the button is not available just click the red x button to close and save the window. Highlight the HyperSpin frontend item in the list you just added and: click on the button that looks like a folder with a thumbtack (bulletin board pin) to set HyperSpin as your default frontend. (default frontend means RocketLauncherUI will always start up with this frontend) click on the button that looks like a robot terminator red eye to set HyperSpin as the active frontend. (active frontend means the frontend that you are currently working on in RocketLauncherUI) Look in the left near the top of the RocketLauncherUI main window for the words "Select a System" under it you should see a button that looks like two green arrows making a circle. Click on the circular green arrows button to refresh the systems list to match the active frontend. You can now close RocketLauncherUI or leave it open (you will need to open it later in this guide). Now to make full use of RocketLauncher we want to download the media pack. http://www.rlauncher.com/forum/downloads.php?do=file&id=2
      Extract the contents of the media pack into your RocketLauncher folder (C:\RocketLauncher).

      Congrats you have now installed HyperSpin + RocketLauncher!
      You think you're done don't you, but you're wrong. There is still more to go. Gasp.
      We don't have any emulators yet.
        Ok then let's try to set one up, how about we do the most popular one. MAME
      Download the binary unless you plan on compiling your own version. (there are some benefits to compiling, hiscores and nonag being the most popular) Now let's create a new folder on your root drive called Emulators. C:\Emulators -this is not required but it is recommended Now inside this folder create a new folder named after the emulator called MAME. C:\Emulators\MAME Now inside your emulator folder install MAME. So the path to your mame.exe or mame64.exe should be C:\Emulators\MAME\mame.exe
      Congrats you have installed an emulator. Now to get it working with RocketLauncher and ultimately HyperSpin. Open your RocketLauncher folder (C:\RocketLauncher), now look for the RocketLauncherUI folder open it and then open RocketLauncherUI.exe
      On the left hand side in RocketLauncherUI you will see a list of all our systems and at the top is a system called Global (not actually a system in HyperSpin). Changing settings in Global affects all of your settings in every system. Consider this the default settings. Ok now highlight the Global System and click on the big tab Emulators. If you installed correctly (didn't skip steps like step 9) you will be greeted with a long list of emulator names. Scroll down this list until you find MAME. Double click on it. A new window will appear. Fill in the path value by clicking on the magnifying glass to the right of the path entry and find your MAME emulator.
      Close this window if the values for module and rom extensions are already filled. Now highlight the MAME system in the systems list. and click on the big tab Emulators. Add the path to your MAME roms in the rom paths field by clicking on the green plus button.
      For most mame installations it's in the same folder as mame.exe in a folder called roms. C:\Emulators\MAME\roms
      For other systems, I personally put roms in a folder separate from hyperspin and the emulator folder, something like C:\Games\systemName\gameName.extension
      ROMS are not included with MAME or HyperSpin or RocketLauncher. Do not ask for roms on this forum, it will get you banned. Google is your friend for this. Now back in RocketLauncherUI choose your default emulator by clicking on the Magnifying glass. Choose MAME [global] from the list that appears.
      Congrats! you have now setup MAME within RocketLauncher. Now to setup MAME for use with HyperSpin. First get the latest MAME xml from HyperList http://hyperlist.hyperspin-fe.com/ Drop the xml you downloaded into C:\HyperSpin\Databases\MAME\ and rename it to MAME.xml. If it asks you to overwrite, choose yes.
      XML management can be a pain and so can renaming all those roms that you legally copied from your personal collection of actual games that you legally acquired through legal purchases. For emulators other than MAME or MESS you will need to make sure that the file names for your roms match the names for the games found in your xml. For the best hyperspin xml management and renaming applications use Don's HyperSpin Tools or check out the beta version of HyperTools.zip (thanks, emb).
      I think that's it for a basic installation. It will be hard and time consuming to get artwork and videos until you subscribe to emumovies and receive platinum status here by donating. Oh wait I almost forgot, whenever any one says edit your module settings they usually mean open RocketLauncherUI click on your system, click on the big modules tab, highlight the module you are using, and then click on the Edit Global Settings button. A little bit more info can be found here & here. If you liked this guide and want to say thank you, hit the like button at the bottom of this post. Hyperspin and RocketLauncher Compatibility Fix.zip
×