Jump to content
Sign in to follow this  
Psyboy2720

Zero Delay USB encoders

Recommended Posts

Hi Guys. I'm bran new on this forum so I hope I've posted this the right place. 

I have a two player bartop, set up with two Reyman zero delay usb encoders. 
My question is: How do I wire them up correctly to use them with Hyperspin? 

Right now, the buttons for player 1 and two are wired as shown in the Picture. For player 1, buttons on the front are 9, 10 and 11. 
Hope you Guys can help 🙂 

My Current setup is with a pi, but I'm transitioning to HyperSpin shortly

20191012_074633.jpg

Share this post


Link to post
Share on other sites

 

zero delay encoders is nothing but a marketing name

serial joysticks sucked and had a horrible delay -->  USB  no delay

what you have is a joystick encoder

you basically saved yourself the trouble of doing this to a USB controller

 

https://www.slagcoin.com/joystick/pcb_wiring.html

 

 

as you may or may not know  Hyperspin has a bug with USB controllers

DISABLE!!!!!!!!!!!!!!! usb joysticks use in HyperHQ

and use this to map your Joystick Encoder to Hyperspin.

it was built for a 360 Controller but you can change the button numbers to match what you have/want

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By AntN
      Good morning guys,
      I have a friend who has recently bought a 2nd hand machine and it doesn't seem to be working correctly. He asked me to take a look at it as I am more into IT, but my experience with emulators is slim, so i was wondering if someone could help point me in the right direction.
      When launching Hyperspin, everything seems to work fine, until a game loads. Then some or all of the buttons stop working. He has 2 x Sanwa joystick with 6 buttons plus credit and player buttons. After reading the initial guide on here i could see that the software version was very old, so i downloaded the latest update files and installed them.
      N64 roms are not working at all, it asks for the memory pak, and a lot of the other consoles do not work either, but the Sega Genesis system does, so i am confused and I'm guessing it is a configuration issue more than something being wrong.
      Has anyone else had a similar issue please?
       
    • By Frikoriko
      Hello everyone
      Is it possible to control the menu wheel using a steering wheel? I've tried enabling joystick but that doesn't seem to work. I've also tried spinner with no luck either.
      If someone could be me to a tutorial, I'd really appreciate. I've looked and googled it but can't find any info on how to do this.
      Thanks
       
    • By godisnothere
      Ok here goes nothing. I wonder if anyone else had this same problem I encountered.
      I bought a x-arcade tankstick that I configured to work for my hyperspin setup. IT worked flawlessly. Until I decided to change from having it hooked up to my tv at max resolution of 1360x768 to a pc monitor at full hd resolution of 1920x1080. now When I launch hyperspin the wheels just keep spinning endlessly . no controls seem to work. So I went to hyperHQ and turned off the trackball and it works fine. but without a trackball. everything works fine if I switch the resolution back down to 1360x 768. then I can turn the trackball back on and everything is back to normal.
      My question is: Is there a way that I can have both 1920x1080 resolution and a working trackball? Im forced to lower the resolution if I Want to use my trackball. ITs getting pretty frustrating. I doubt anybody here has had the same problem. BUt if you have a tankstick at home try changing the resolution and see if the same problem occurs for you and let me know how to fix it.  PLEASE!
       
    • By Linkseo
      Sorry for the silly question. It just dawned on me that i've been exiting a game using escape on my keyboard this entire time.
      I'd like to be able to do this with a joystick. im still learning the software and im currently using an xbox 360 controller. I'd like to make a hotkey while in game to revert back to my hyperspin wheel. preferably a button combo hotkey like back +start.
       
      Can anyone please help me out?
      Thanks 
×
×
  • Create New...