I'm trying to create an application from an old ahk script (2022) that copy all necessary games from a game list xml (and also its dependencies ak:bios,chd,rom,device)

i've created a simply interface (look at attached screenshot)

My question is : Does an app already do this?

r0man0

Wondering if anyone here has the Arcade64 ver. 261 (or if not, ver. 260) with the no nagg, etc..

Or know where I might find it with the no nag.

Before I would download them here on HS download area.

Thanks,

t

Je construis une arcade pour fils.
Je travaille sur une m box sous hyperspin (Windows 7)

j'ai configuré (enfin je croyais) sans difficulté le panneau dans hyperlaunch HQ en passant par le mode contrôleur (tab etc…). 
Puis en voulant configurer le J2 et en prenant la même méthode, chaque mouvement de joystick correspondait à l'action « commande de pouce « avec une lettre à côté . Par exemple Haut = commande de pouce U.  Même phénomène même pour celui qui du J1 qui etait pourtant correct 
je deviens fou car pas moyen de trouver la solution . 
je débute donc excusez mon manque de vocabulaire. 
si quelqu’un sait m’éclairer s’il vous plait

TIA

I'm using hypermarquee and LEDBlinky to drive a digital marquee and RGB buttons on a custom build through EDS.

My issue is getting LEDBlinky to 'demo' the correct controls as you select the game.  When I was only using LEDBlinky, the RGB buttons worked great.  It would play a pattern during startup, highlight the active buttons in Hyperspin, and demo the appropriate buttons as you flipped through games on most of the wheels.

Now that I've added EDS to the mix, it appears to be restarting LEDBlinky each time a game is selected - thus slowing down or preventing the program to effectively 'demo' a games controls.  It'll do it, but really slow.  Once a game is started, LEDBlinky works perfectly and illuminates the right buttons - but id really like to figure out how to get the 'demo' working right.

Any thoughts?  Is this an EDS filer thing or ICP selection?  

I have been testing Ledblinky via EDS and HQ.

HQ > LEDBlinky works perfectly.

EDS>LEDBlinky > CPC 
1)Parameters as  [LEDBlinky] - blank Open /Close Filters, it does nothing except wrong lightings or stop at white light after animation. no animations after exiting back to  main wheels from game wheels, etc.

2)Parameters [event]""[system]""[game] -  blank open close/filters, it works just fine.

But I am seeing everyone uses parameters as LEDBlinky with blank open /close filters. Can someone explain me?

How will Ledblinky close after exiting HS ?

Appreciate you all thanks

I noticed that the program uses up to 0.6% CPU time for no reason the moment you start it (manually or automatically, doesn't matter). And it will continue to eat resources until it detects a joystick. In my case, i have to turn my XBOX One controller ON. When the joystick is detected, the CPU usage goes to 0.0% and it remains there even after you disable all joysticks again. Until you terminate the program and open it again. It's like really needs to detect a joystick after JoyToKey starts.

Has anyone else noticed this? Is there a fix? It's a bit inconvenient to have to turn on the controller every time i turn on/restart my PC, just to free up my CPU. Yeah, it's only a little CPU usage but it's there, for no reason.

I would like to get your expertise about a proper implementation of JoyToKey in HS/RL. I searched on the forum (and via Google) on how to set this up and i stumbled on the detailed explanation from @Spawk about this topic. 

I follow this to the letter. But i cannot get my controller to work within HS/RL. I have got an 8bitdo sn30 pro+ controller connected via Bluetooth to my windows 11 pro machine. I used the latest JoyToKey software from the official website. First thing i did was configuring JTK would automatically startup when i startup my PC. And follow the rest of the guide mentioned in the link above. I created the default and HS profile first and afterwards did the same in RocketLauncherUI. As i understand correctly this setup is only needed to control hyperspin and rocketlauncher with a controller.

I follow all steps and even setup an escape 2 keypress combination to close the (for example) Wii U (cemu) emulator.

Afterwards i rebooted the PC and started up HyperSpin. But i could not controll the wheels in hyperspin. I only could do this with my keyboard. The only thing i do not understand is when i started up Cemu within HS and tried to close the application to go back to HS (start + select button press configured as Escape) actually worked from the controller. 

Again pressing this button combination kept escaping from the system to the point i could close the system. But only the button combination setup specifically to work within CEMU worked. The rest does not work and i do not understand what i am doing wrong.

After further investigation i stumbled upon this tutorial: https://gameroomsolutions.com/hyperspin-controller-setup-with-joytokey-and-gamepad/ where i began to understood where to find the button mapping for HS and RL and again set up the buttons accordingly but still nothing. Only the double button press (esc) i defined for cemu works.

Do any of you have any idea what could be the problem? Is it windows 11? or do i need an older version of JTK? Of do i need another (xbox) controller? I have researched this issue a lot but havent found a solution for my setup. Hope you can point me in the right direction.

Sorry for the long text, but wanted to make sure i decribed my issue correctly. Hope you are willing to point me in the right direction. Thank you in advance for your time.

Kind regards
Lex

== EDIT ==

I downgraded from Windows 11 pro to Windows 10 pro (just to rule things out) I did a fresh install of HS / RL and JoyToKey and ..... NOW IT WORKS! I cannot explain why it works in Win 10 and doesnt in Win 11 but i got it to work. Really really happy about this. The only 'challenge' that remains is to get JoyToKey to startup automatically in Win 10 pro. I tried this method: https://joytokey.net/en/posts/how-to-auto-startup/ but so far this does not work for me. So if any of you have got a foolproof way of getting that to work i would appreciate this immensly. Thank you in advance.

========= 

Just finished configuring HyperMarquee with EDS, the marquee videos play great and everything is looking great.

Only one issue left, the mp4 marquee only play a single time until completion and then blank screen. Is there any setting when using animated marquees to make vlc loop?

Did I miss an argument that can be added? Tried a different vlc version and seems newer ones don't work at all now, so definitely have to use an older release as there is a plugin error when starting Hyperspin with any recent version of VLC.

Any help is appreciated!

Thank you!!

when i play a video through HyperMarquee, it doesnt close automatically and it keeps a black screen with some opacity.

It only happens when the video is not found or it finish, hypermarquee doesnt close automatically

Thx guys

I have a Sinden light gun hooked up to my pc. I have everything working on my gun wheel but when I launch a gun game, I’m having an issue when I try to shoot targets near the left or right boarders. If I try and fire a 1/2 inch from the side my gun recalibrates to the center of the screen. I tried adjusting the different Sinden boarders but that didn’t work. I also tried rescaling the screen size but that was no good as well. I tried to remove the bezel set work but that didn’t help. I can’t remember how to adjust the layers. Im not sure but I was thinking if I could move the bezels to the back it might work. But I’m not sure how to do that or if it’s even possible. Anybody else having this issue with the Sinden light gun.

If you're using it via command line, copy the videos you want into the same folder as AACGain and type: aacgain /r *.mp4

Let it grind away on the pile and presto! Nice even-volume set of audio-normalized videos. No more LOUD then soft then LOUD again as you navigate the wheel. Enjoy!

I got both hypermarquee and ledblinky working correctly when i set the path to the ledblinky in hyperhq. How do i get them to work at the same time? I can only use one or the other. 

hypermarquee is showing a black background when it doesnt find any artwork. Any solution to this problem? It should be just transparent.