krazyscotsman Posted February 21, 2015 Posted February 21, 2015 I'm looking to add a second XBOX 360 controller to my Naomi emulation. I have the following settings for standard_jama0_0. I need settings for the a second XBOX 360 controller if possible. I've been searching around for these settings but can't find any. Thanks for any help. Jama0_0: PUSH1 = 805306380 PUSH2 = 805306381 PUSH3 = 805306382 PUSH4 = 805306383 PUSH5 = 805306376 PUSH6 = 805306377 PUSH7 = 1342177280 PUSH8 = 1342177536 SERVICE = 59 START = 805306372 COIN = 805306373 DIGITALUP = -1879047680 DIGITALDOWN = -1879047424 DIGITALLEFT = -1879048192 DIGITALRIGHT = -1879047936 ANALOGUP = 805306368 ANALOGDOWN = 805306369 ANALOGLEFT = 805306370 ANALOGRIGHT = 805306371 ANALOGUP2 = -1879046656 ANALOGDOWN2 = -1879046400 ANALOGLEFT2 = -1879046912 ANALOGRIGHT2 = -1879047168
ChrisKant Posted February 23, 2015 Posted February 23, 2015 make the settings directly in demul for the first controller, and copy them from the config file to to the seconds controller. then you can make the settings for the first controller directly in demul. I did this with two xbox 360 controller and it works perfect :-)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.