dpickl01 Posted April 8, 2014 Posted April 8, 2014 back after a few years and on another project with LED's have no idea what program to use or how to set this up can someone post a link please
rfancella Posted April 9, 2014 Posted April 9, 2014 One of the best and only program out there to control LED's is LEDBlinkey: http://www.ledblinky.net/ledblinky.htm Is this it? Thanks, Ron Code Monkey and all around Command Line geek!If you like what someone has said or done for you, be sure and 'Thank' them. And if they changed your life, send them a Beer!
dpickl01 Posted April 9, 2014 Author Posted April 9, 2014 ok well followed the setup on the program in post #2 and i still cant get it running ??? nothing lights up ?
dpickl01 Posted April 10, 2014 Author Posted April 10, 2014 I have a ledpac 16 input on the left their are numbered +,1-8 on the right is +,9-16 I have all the led jumped on each half and the other side plugged into 1-7 same with the p2 side but also don't have the power light glowing coils it be a bad board?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.