Jump to content
Unfortunately we had to take download section back offline temporarily. We should have it working normally soon.

My HTPC Hyperspin Build


Recommended Posts


I have been planning this build of hyperspin for a while now and have finally decided to start ordering computer parts to finally create my "HTPC" Hyperspin build.

I will be emulating up to gamecube games with this setup at a minimum of native resolution but am planning to increase the resolution up a bit to look sharper on my HD display.

Here are my planned Specs.

Case : CoolerMaster Elite 130

Processor : Intel Pentium G3258 3.2GHz (hoping to overclock to around 4GHz

CPU Coller : Corsair H80I

Motherboard : Asus H81I Plus

Ram : 4GB Kingston HyperX Fury 1600MHz

Graphics Card : Nvidia 550 Ti (have an old one lying around)

Power Supply : Corsair Builder Series 430W Modular

Hard Drive : Samsung 840 EVO 250GB SSD

And 2 Xbox Controllers.

I wanted to go purely SSD for speed and have managed to limit down my Hyperspin to be small enough to put onto this SSD.

I will try to update this as parts come in and as the build goes on.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...