bandicoot37 Posted July 8, 2012 Share Posted July 8, 2012 First you need to read this thread http://www.starlino.com/usb_gamepad.html after that you must know you can take an accelerometer from a NUNCHUCK (WII) for hacking it or purchase a ADXL335 on ebay Here picture of mine which a test and can confirm it's work like a charm Hope somebody will try this here's picture of mine ( in the last picture you can see a TOUCHPAD hack on the playfield ) Some days i loving me :dblthumb: :dblthumb: :dblthumb: Link to comment Share on other sites More sharing options...
Spektre99 Posted July 11, 2012 Share Posted July 11, 2012 Pretty cool. Was it dificult to calibrate? Link to comment Share on other sites More sharing options...
Avar Posted July 11, 2012 Share Posted July 11, 2012 This makes me wish I had time to setup a HyperPin cab so bad ; ; Link to comment Share on other sites More sharing options...
bandicoot37 Posted July 11, 2012 Author Share Posted July 11, 2012 no for caibration just use windows configuration and that all Link to comment Share on other sites More sharing options...
Maniac2k Posted July 16, 2012 Share Posted July 16, 2012 I'm already trying this with a ADXL330KCPZ. This is currently hooked up to an Atmega8 with mJoy Software. But mJoy is written in assembler. I also discovered a project called Mame Panel which offers only digital inputs but written in C. My approach is to combine this with the normal buttons we need. Currently my progress is limited due to missing knowledge in USB and assembler. Link to comment Share on other sites More sharing options...
Steve Works Posted March 14, 2014 Share Posted March 14, 2014 Did the prototype evolve in anyway after this point. Are you interesting is selling a couple of them if there is demand? ______________________________________________________ Steve Works load cells Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.