Jump to content

djjoke

User
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

1 Follower

About djjoke

  • Rank
    Lurker
  • Birthday 12/30/1976
  1. Thats right! Boards are available at http://www.vpin-shop.de I´ve got three different boards available. 1st the PinAna1 board: It supported a analog plunger and a two axis nudging and also the tilt function 2nd the PinIn1 board: It supported the same as the PinAna1 board plus 20 defined digital inputs 3rd the PinControl1 board: It supported the same as the PinAna1 board plus 10 defined digital inputs plus 7 programable outputs and a rgb output. All outputs are fully DOF compatible!!! Atm i design a kit included the PinControl1 a slide control and a slide control retainer. The kit will be available at 22.12.14 For those who haven´t had a plunger yet, i´ve got some. One point a have to say. I only ship within the EU.
  2. I also agree 100%. To use the pinDMD Board isn´t cheaper but much easier than a 3 monitor setup. I use the V1 and the V2 of the board with a pinled and a cherry DMD without any problems. In the next few weeks i want to open a onlineshop in germany like virtuapin. So i decided to take the V2 board into my shop.
  3. So Guys, a few days later i had finished my project. But after i finished it, i recognized that something was still missing. I spent lot of hours in the www :coffee:and found out what was missing..... a custom made topper...... .......So lets found a theme and made it...... Do some RGB lights behind it, wire it to the LEDWiz, change the programming and test it....... Yes it works.... like i would!! At last some pictures of the finished "Back to the Pinball" Cab.
  4. After the paint was dried i build all toghether WOW what an optic! But its only the look without any function. Whats left? The electric...... So take same different coloured cables and begin... It tooks 20 hours to finished the cabling The last days i spend many hours to finished programming ledwiz and hyperpin. Hope i can get ready this weekend..
  5. ...continued Inside Cab: - 3 Flasher with Cree RGBW Leds - 1 22cm fan on Buttom - 2.1 Soundsystem Gembird (only Sub) with 40W - 2 18cm blue illumited fan on the backside Inside Backbox: - Replay Knocker - 3 Flasher with Cree RGBW Leds on Top - 1 18cm blue illumited fan - 2 40W loudspeakers mounted in a custom made bezel All started with the 1st Step: Cutting out the wood After that i take the meassurements for the backbox A few hours later.... 1st fitting test with legs In the first planning stats i wanted to use a 42" monitor. At last i decided to use a 46" and so after building the first cab i recoqnized that the 46" doesn´t fit into the cab. So i made a new one. After all components where build toghether and fixed the next step will come.....the paint.... In the time where the cab was painted i setup the technic and the the first running tests of vp
  6. Hy Guys, i have build a new Cab for a friend and would like to introduce you my work. Here are my specs: PC: - Board: Gigabyte Z77-DS3H - CPU: Intel Core I7 2600k - RAM: DDR3 4GB - SSD: Intel 330 120GB - Grafic PF: msi N560GTX-Ti Twin Frozr II 1024MB, 256-Bit - Grafic BG,DMD: Gainward Bliss 8800GT PCX 512MB - 850W ATX PSU - WinXP32 Bit - Playfield: 46" Samsung 46UE5000 LED - Backglass: 32" Toshiba 32HL933 - DMD: 17" AMW M177TD LCD Cab: - Widebody Custom made (based on Williams WB) to get 46" LED fixed. - Backbox Custom made to get 32" and 17" fixed. - black painted - Coindoor with 1,- and 2,- coin checking devices - 10 Pushbuttons - 1 Main Power Switch Inside Cab: - 2 Tilt Bops for nudging left and right - 5 Siemens contractors 24V to be continued.....
  7. Servus,

    bin zwar nicht der erfahrenste Pin-Bauer, jedoch habe ich bereits einige Hürden gemeistert und denke, dass ich somit auch schon diverse Aussagen treffen kann.

    Wenn Du Fragen und Probleme hast, dann schreib mir einfach.

    Grüße

    DJJoke

  8. Hi habe mir mal dein Pin angeschaut, ich bin auch gerade debei nen Pin zu starten, helfen tut mir der Chris allerdings scheint er etwas genervt zu sein da ich ihn viel Frage vieles hab ich aus den threads gelesen und wollte überwiegend noch Bestätigung von ihm haben allerdings kam denn jetzt mal die Info von ihm das ich ja nur nehme und nichts gebe, nun ist es aber so das er nun mal der Meister im Pin bauen ist und leider nur wenige deutschsprachige menget hier sind die man fragen kann, ich kann ihn ja verstehen aber als Meister gibt's wohl kaum noch jemandem der ihn Tipps gben kann vielleicht kann ich diverse Sachen mit dir mal besprechen da du ja auch das volle Programm genommen hast

  9. hy, i red a lot of threats in which 7" usb dmd´s are used. But which kind of 7" usb dmd are you using? Which manufacturer do you use? Please give me som help.
×
×
  • Create New...