Cupcakus Posted August 1, 2013 Share Posted August 1, 2013 Hi all, new here, I'm planning out my build. I think I found the right forum for this now. I have a standard Williams widebody cabinet, the inside width is 23.25", I cannot find a 46" TV that will fit this correctly without slotting. I have seen other builds that claim to use mameman's widebody plans and seem to fit a 46" TV without slotting. I looked at his plans, the inside dimensions of those plans is 594mm, which is roughly 23.25". Is there a 46" TV model that I am overlooking here? Any help would be appreciated. Link to comment Share on other sites More sharing options...
mameman Posted August 1, 2013 Share Posted August 1, 2013 Nope. A 46 will either need slotting or the top edge relieved to allow the screen to sit on top of the cabinet sides. Link to comment Share on other sites More sharing options...
chuckster Posted August 1, 2013 Share Posted August 1, 2013 I fit a de-cased 46" Sony Bravia inside an old Paragon widebody with room to spare. It was 27" on the inside measurement. Link to comment Share on other sites More sharing options...
scottpe Posted August 1, 2013 Share Posted August 1, 2013 I fit a de-cased 46" Sony Bravia inside an old Paragon widebody with room to spare. It was 27" on the inside measurement. That would be great news if the OP had a Paragon cabinet... Link to comment Share on other sites More sharing options...
shakenbake Posted August 2, 2013 Share Posted August 2, 2013 They call that a jumbo I think. I did one of those and there is lots of room in there. Link to comment Share on other sites More sharing options...
mameman Posted August 2, 2013 Share Posted August 2, 2013 Yup make it any width you want and simply buy a custom lockdown bar. Simple! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.