Jump to content
Site is currently back up for stability test, we think we have isolated the issue. If the site starts crashing again we will take it offline to continue repairs ×

Archived

This topic is now archived and is closed to further replies.

Tanveer

Hyperspin CRASHED help needed

Recommended Posts

Hi everyone,

 

Need the hyperspin community to give me a hand! I was playing my mame cabinet where I got this error message.

 

I have a birthday party I'm hosting this weekend and hope to get this up and running before families start coming in.

 

I have reset the system with no avail.

 

Any help would be appreciated! 

 

IMG_3826.jpg

Share this post


Link to post
Share on other sites

That's not a crash or even a HyperSpin issue, it's a RocketLauncher error. This error usually means that you don't have the settings configured properly for RocketLauncher. Are you able to run games directly through MAME (outside of HS/RL)?

 

If games do run through MAME directly you'll need to set your Logging Level to Troubleshooting in RocketLauncherUI on the General Settings -> RocketLauncher tab. Then attempt to run a MAME game which will create a RocketLauncher.log file in your RocketLauncher folder. Post that log file here and we'll try to help.

Share this post


Link to post
Share on other sites

Do you have 7zip enabled for MAME in RocketLauncherUI? Have you made any changes lately?  A log file would be a huge help in troubleshooting this.

Share this post


Link to post
Share on other sites

  • Similar Content

    • By fettesLama
      Hi,
      ich habe einen Wireless Xbox One Controller und 1einen Wireless "Bartop" Controller, ein "Hori Fighten Stick"
      Das Problem ist:
      Wenn nur der Xbox One Controller verbunden ist geht sein Analog Stick im HyperSpin Wheel (um hoch und runter zu gehen),aber wenn Hori Stick also der zweite verbunden ist geht nur der Hori Fighting Stick zum Hoch und runter gehen im HyperSpin Wheel. Die Buttons (also A, B ,... ) beim Xbox One Controller gehen aber trotzdem noch.
      Anmerkung: Der Hori Fighten Stick hat als Input für Up,Down,....POV
      Schon mal Danke im Voraus
    • By wildpumpk1n
      Hello guys,
      I'm working on a Tate build with Hyperspin for candy 15khz cab. 
      I made it for used with jammAsd or ipac2 or something who use a keyboard encoder.
      I was thinking to find solution for people who will used it with a 1player panel with 3buttons and start.
       
      Usually the keybinding is 
      Start p1 . 1
      Button 1 . Lctrl
      Button 2 . Lalt
      Button 3. Space
      Button 4 . Shift
       
      My trouble is hyperhq don't recognize the alt key. My thought was to ask rocketlauncher to use an AHK script to change lalt::k
      No problem, it works. If I start it manually, Hyperspin recognize my button2 (lalt) as a k.
      I change few thing in rocketlauncher asking it to use AHK I made under RL Hyperspin.ahk. I select external in settings, etc. 
      But its not working, I didn't see the script in my task bar ?
      As I used a lot of ahk keymapper for pc Games in this build I don't want to start it with hyperhq at the start of Hyperspin, maybe it will be the mess. 
       
      If you have any Idea, thanks guys ?
      If you want to have a look to the build 
       
    • By capnclaw
      This is my ICade mod using USB encoder for the joystick and buttons with a Dell micro PC in the back end with USB volume knob. Powered by Windows 10, Hyper-Spin, and Rocket-Launcher with Atari 2600, MAME, Nintendo Entertainment System, and Sega Genesis emulators and roms set up. The display is a 4:3 8 inch Neewar monitor which I purchased off of Amazon. I have acrylic glass behind my wooden bezel which I drilled out holes for monitor buttons in both the bezel and glass. All artwork was created by me in Photoshop and printed on adhesive vinyl. The marquee was made with the same acrylic glass and has an 8 inch LED glass enclosure with remote made for small fish aquariums I purchased off of Amazon as well. All wood paneling is MDF material and was cut and drilled via a Black and Decker drill with spade bits and a small Dremel band saw. I mostly used gorilla glue to piece everything together. I used Behr Marquee 2 in 1 primer and paint to paint the MDF material. The Hyper-Spin intro video was created by me using open source and free program Open Shot Video Editing. It took me roughly 2 months to complete from start to finish in between work and my family lol. I am so glad I did it though I am so pleased and happy with the outcome. A match made in Heaven! MY favorite band KISS (original members) and my favorite hobby retro arcade. I absolutely love it!
      Link to Videos
      KISS Arcade Boot UP (Short)
      KISS Arcade Boot Up (Long)
      KISS Arcade In Action (Wrestle-Fest by Technos)
       
       
       
       








    • By jevs
      Hi all.    very new to this, but a bit handy when it comes to building stuff. 
      A good friend of mine showed me his bartop machin that he was in the process of buillding and after looking at some of the games etc (running on pi) i was wowed.    decided to have a go myself as I was off work over xmas.....so it begins...
       
      Had a look around the web for the kind of machine I wanted to build but nithing really caught my eye so went with a standard kind of cabinet - no sizes or plans, just a little sketch on the back of a used envelope and away we go - only consideration I had to make was the screen size.   Popped to my local currys/pc world - had a look, wanted to have 4k - but whch size?  once its bought you cant go any bigger so I figured its all or nothing so picked up a 43" 4k LG smart tv. 
      Everything was build around it, so I only had to make sure the inside dimension of the cabinet was 40" had it all built and working in about 3 days - took another 5 days or so adding bits here and there...speakers and subwoofer, foot rail, hidden draw for keyboard /mouse etc.
       
      all worked out great - still learning config of hyperspin but will get there in the end
       
      Cant wait to build the MK2 now....
      video below  - compiled from pictures i took while maing the cabinet - all put together by apple iphone lol.  
      Jevs Arcade - youtube
       
      Taken this morning after fitting the footrail. pretty much finished now  hope you like!

       
       
       
       
       
       
       
×
×
  • Create New...