Jump to content

mameman

Platinum Member
 View Profile  See their activity

  • Posts

    482

  • Joined

  • Last visited

 Content Type 

Everything posted by mameman

  1. mameman
    Can't wait to see it WWW.xtremepinball.com
  2. mameman
    Assume we need to get hold of Charles. The only items that made it here to me were the ledwiz, and a first revision booster board. Adams button package from Noah never showed, although chased him several times. I emailed Adam this morning to see if he had any updates on them. WWW.Xtremepinball.com
  3. mameman
    Yup. WWW.Xtremepinball.com
  4. mameman
    Love it www. Xtremepinball.com
  5. mameman
    Brad will reach out to you later this week. May need to look at doing some Playfield printing that would benefit from either cutting out insert areas or printing on clear media (once the Playfield has had a white backing applied)
  6. mameman
    Do some digging and see if you can find some transformers that put out the required voltages needed for a plasma display. You can use multiple transformers and even feed one from another. Also remember a transformer is just that and can be used either way. A 110v ac input and 12v dc output can also generate 110v ac if you feed it 12v dc (although not very efficently)
  7. mameman
    They take the core voltages from the transformer and spits out the required voltages for all the boards. Again you need to read the circuit diagrams, the transformers put out a couple of voltages on each tap. It's not as straight forward as buy one of these plug it into the wall and your set. If it was we would have done this months ago and all been using cheap plasma displays.
  8. mameman
    I looked at doing this many months ago. Your problem is still supplying the power this needs. If you look at the wiring diagram for one of the machines that uses these boards, you still need to feed is some odd voltages( 100v, 73v) etc as well as 12 and 5 (can't recall the exact voltages).
  9. mameman
    Sounds good, I may revisit the turnkey speaker panel idea again if the price comes out decent.
  10. mameman
    Woohooo can't wait, will be a nice option
  11. mameman
    +100 does all my printing.
  12. mameman
    No worries, you can Come wire the thing when the time comes, And lend a hand with assembly
  13. mameman
    ohh and i'll be throwing in a topper for good measures also
  14. mameman
    thanks Marc, Eric. now back to getting this thread on track
  15. mameman
    only if you power it with a pinball power supply and power board, it will likely need 100,50 and -5 (or something like that)
  16. mameman
    looking good, gonna look and bundling russ's board with a display and speaker/dmd panel. can't wait to get mine
  17. mameman
    Dam, did I miss a post where these were in production already?
  18. mameman
    looking good.. hmm gets me thinking... pcboard+cnc=
  19. mameman
    Makes sense, had wondered the same myself
  20. mameman
    Hopefully I answered most of this in the pm you sent with the same questions earlier today. If not it would be more use to ask what you still need clarification on in this thread.
  21. mameman
    I think Irfanview can do this, its free and has a batch mode.
  22. mameman
    sure as long as you buy relays that accept a 12v single as a trigger. i am running 24v solenoids and triggering with a 5v signal as that is what i am running on that bank of the ledwiz. depending on how you have your ledwiz setup, you could run one bank of the ledwiz @ 24v. have you checked the draw on your solenoids to see if they could be triggered directly from the ledwiz (less than 500mah)?
  23. mameman
    come on then whoever had the Tron set printed, post a pic of your cab... we wanna seeeeeeeeeee....
  24. mameman
    Given the multitude of Color profiles in photoshop etc maybe it's a good idea to recommend one to use so we have a reference point? For example what cmyk profile is advisable?
  25. mameman
    I highly recommend Bradley. Fantastic work and the only company that I use for printing my artwork. Great value and a big kudos for giving back to this community. Greg
×
×
  • Create New...