zebulon Posted October 23, 2013 Posted October 23, 2013 New Board Design Coming Soon - in testing phase now. http://www.zebsboards.com/index.php/feedback-control-devices/virtual-output-kit-2-detail 2 output kits left in stock - clearance priced. I know so much about so little that I could teach you everything there is to know about nothing....
shakenbake Posted October 24, 2013 Posted October 24, 2013 As always you make excellent products Zeb. Can't wait till I get my hands on these.
zebulon Posted October 25, 2013 Author Posted October 25, 2013 Thanks man! I have a LEDWiz on the way so I can test it out, and a power distribution design that has been shipped so it should only be a couple of weeks before I can place a large order and start production. I know so much about so little that I could teach you everything there is to know about nothing....
arngrim Posted October 25, 2013 Posted October 25, 2013 Are we thinking about alternatives of ledwiz? Especially with DOF that can be adapted to more hardware. Because with ledwiz is pretty limited in terms of color rendering, only 48 possibilities instead of a usual 255, and the low intensities makes the color flickering. Except that i love the ouptut kit and booster board that i bought from you
zebulon Posted October 26, 2013 Author Posted October 26, 2013 Funny you should ask that. I'm currently looking for someone with pic programming abilities that might be interested in a winter project.... I know so much about so little that I could teach you everything there is to know about nothing....
shakenbake Posted October 26, 2013 Posted October 26, 2013 I do not have that level of programming skills but I am very interested in funding any project that advances what goes into our pincabs
Luckydogg420 Posted October 26, 2013 Posted October 26, 2013 Just for a total noob, can you tell us what these boards do? Do they go between a led wiz and the contactors to boost power? I'm planning to begin my build this winter. Just bought a tv.
zebulon Posted October 26, 2013 Author Posted October 26, 2013 That's exactly what they do. The ledwiz has a limitation of 500ma per output up to 2w per chip at any given time, the boards amplify that capacity to 8x that amount. I know so much about so little that I could teach you everything there is to know about nothing....
gbeef Posted October 27, 2013 Posted October 27, 2013 That's exactly what they do. The ledwiz has a limitation of 500ma per output up to 2w per chip at any given time, the boards amplify that capacity to 8x that amount. Hey do you have an estimate what these will cost? Im looking at upgrading my cabinet. My Cabs My Pin Cab Attack of the PINZ cab My Racing Cab OutRun Racing
zebulon Posted October 27, 2013 Author Posted October 27, 2013 Still waiting on the ledwiz to arrive (I ran out) to test the design but I see no reason why it won't pass. I'm shooting for a price tag that's sub $200 for the kit (power distro board, output board, resistor board for leds and ribbon cable). This specific board I'm hoping will come in around $90 - $100 but I'm having a hard time getting quotes on assembly (the through hole boards were fine to assemble but this one is a bit of a bear with the sot Mosfets being so small). My goal this week is to get a quote from North American Board manufacturers as I've jumped through hoops for the Chinese and never heard anything back from them. Obviously, getting assembly done in the US or Canada is going to make for a better quality part but also a more expensive one. Thanks for looking! I know so much about so little that I could teach you everything there is to know about nothing....
russdx Posted October 27, 2013 Posted October 27, 2013 check out http://www.quick-teck.co.uk Only cheap in large quantities like 100+ though Very good quality + They will make the PCB for you as well
zebulon Posted October 28, 2013 Author Posted October 28, 2013 Thanks for the link, the price was ok until I did the conversion into the euro.... I know so much about so little that I could teach you everything there is to know about nothing....
russdx Posted November 1, 2013 Posted November 1, 2013 hehe, Yeah you need to do big batches for it to be worth it
zebulon Posted November 1, 2013 Author Posted November 1, 2013 lol, I'm not sure I want to do orders of 10,000...lol I know so much about so little that I could teach you everything there is to know about nothing....
zebulon Posted November 19, 2013 Author Posted November 19, 2013 New Design is available: I know so much about so little that I could teach you everything there is to know about nothing....
russdx Posted November 19, 2013 Posted November 19, 2013 China wont even open your email unless its 100+ batch
zebulon Posted November 19, 2013 Author Posted November 19, 2013 You can get batches of 50, but they cost more. I currently have an order of 100 going through the pipeline... I know so much about so little that I could teach you everything there is to know about nothing....
Lobotomy Posted November 19, 2013 Posted November 19, 2013 Work of art Zeb, work of art! Sending my order right away!
zebulon Posted November 20, 2013 Author Posted November 20, 2013 Thanks Lobotomy! I'll get them out 1st thing tomorrow.... I know so much about so little that I could teach you everything there is to know about nothing....
mouse Posted January 17, 2014 Posted January 17, 2014 Is this new board only valid for the v2 LEDWiz with the Small chips and voltage selection?
zebulon Posted January 17, 2014 Author Posted January 17, 2014 Yes, this is the board that comes with the new output kit. It handles up to 30vdc@4A per output. I know so much about so little that I could teach you everything there is to know about nothing....
Recommended Posts
Archived
This topic is now archived and is closed to further replies.