Decals and Printing for your Hyperpin Cabinet

[Lucian045]

Roland 540v print and cut....going to be upgrading soon but I have this machine dialed in real nice. It just is too slow for the volume I sometimes have to do.

[Metalzoic]

I use a Kodak office 2150 all-in-one printer.

Pretty sure it worked about 3 times before it broke printing my daughters homework. It's pretty super sweet.

[Lucian045]

Still printing away and keeping the thread updated. If you need something please give me a shout.

[Lucian045]

Just a friendly reminder...still printing pinball artwork for the community.  Best way to get ahold of me is email, [email protected].  Thanks for all the orders!

[dyspare]

Thats a pretty sweet offer, and greatly appreciated. I was just scrolling through to see if the offer is still standing as i see the original post is from 2011. Have you been updating the pricing over the years? or has it changes any?  I am going to be doing 3 cabinets soon, for my home, and will be looking for a place to get my artwork. The largest and most extreme cabinet, for us, will be a 71" tall 40" deep and 40" wide, with a 48" controller platform thats 20" deep.  

 

just curious about approximate cost of that? so i can work it into my budget, and try to sneak it in past the wifes watchful glare.

 

Thanks again Lucian045

[Lucian045]

Hey Dyspare...sorry for not getting back to you.  Please send all inquires to [email protected].  I'll be happy to help!

[badave2254]

On Tuesday, April 30, 2013 at 11:58 AM, scottpe said:

The artwork from Brad is awesome. The material he uses is INCREDIBLY forgiving. I probably stuck/unstuck parts of it a dozen or more times, and it never lost its adhesion. It's also really easy to get air bubbles out of it. The 'air release technology' really does work. It seems like really tough stuff too. I think it will last a very long time.

The material aside, the printing itself is also top-notch. Nice vivid colors.

The only issues I had were self-inflicted. I didn't get a couple of the pieces on as perfectly straight as I would have liked. So learn from my mistake; take your time, and get an extra set of hands to help.

Some pics...

I would absolutely love to get my hands on the artwork and have it printed. How would I go about getting it?

[Lucian045]

I'd start by contacting the original poster as he designed the artwork...make sure you can use it, then shoot me an email [email protected].  Thanks.

[Lucian045]

Happy Holidays everyone!  Just updating the thread.  Thanks for all the orders...if you need something let me know.  Thanks.

[Lucian045]

Hey all...got myself a new printer, even better quality and faster printing time for me...definitely a plus.  Still taking orders for the community.  Send me an email if you need something.  [email protected].  Thanks for all the orders and those who have shared on the thread. 

[Lucian045]

Just a quick update...still printing.  If you need to contact me for a quote send it to [email protected].  Happy building!

[badave2254]

Anyone mind sharing their artwork  that will be re-used on my pin cabinet.  Just don't have the talent like some of you guys of there.  PM me or send and email would be so appreciated.  

[Lucian045]

hey all...still printing artwork, if you need something send me an [email protected], thanks.

[badave2254]

On ‎11‎/‎29‎/‎2016 at 5:05 PM, Lucian045 said:

I'd start by contacting the original poster as he designed the artwork...make sure you can use it, then shoot me an email [email protected].  Thanks.

Heard back from Chris and he is fine with me using his artwork.  Finally got my cabinet built, so I'm ready to go.  just sent you an email....

 

• Report reply

Sneetch 10

Replied: 6 minutes ago

Hey there.  Thanks for the compliments on the artwork and i would be happy to allow  you to use it on your cab.   I just ask you send me a picture of your cab when done.  I would love to see it!

Lucian has my permission to print a copy for you.   

 

Thanks and enjoy the build!!

 

Chris aka Sneetch 

[badave2254]

I would like to let everyone who is thinking of getting their printing done by Lucian045  that the quality and delivery time was absolutely amazing.  Ordered it Thursday and received it on Saturday.  I would highly recommend! 

[Lucian045]

Thanks everyone, appreciate the referrals...very busy so I'm not always on the forums but I'm still here.  Email is best [email protected].  Thanks.

[Tim4717]

Does anyone have a psd template to do artwork on a retrocade machine? I am new to photo shop and trying to learn.

Sent from my SM-G955U using Tapatalk

[Lucian045]

Still taking orders... [email protected].  Thanks everyone!

[Lucian045]

Been awhile since I posted but remember I'm always around to print artwork for the community.  If you need something shoot me an email.  Thanks.

[Lucian045]

Hey all, been a while since I updated the Thread.  If you need something please send an email to [email protected].  Thanks!.

[ninja2bceen]

About ready to do this, I know I need to call you to discuss pricing


Sent from my iPhone using Tapatalk

[Lucian045]

Hey all, been a while since I updated the Thread.  If you need something please send an email to [email protected].  Still printing foe the community.  Thanks!

[Lucian045]

Still printing for the community, email [email protected] for a quote, thanks.

 

Brad

[Lucian045]

Been a while since I updated. Still printing for the community, email [email protected] for a quote, thanks.

Brad