Jump to content
HyperSync, HyperList and FTP are now back online ×


This topic is now archived and is closed to further replies.


Big Bang Pin - 46/30/15.6 LED Widebody (custom artwork, bezel less, deep playfield)

Recommended Posts

Good work Chriz, I Find your great project.

Very good, I find your decals, they are of you or own design?

If interested in these or those decals, I'm going to build me my own Virtualpin / Hyperpin and seeking appropriate Cabinet decals for a Standartcabinet.

Translated with Google

Greetings from Germany

Share this post

Link to post
Share on other sites

This is amazing! I'm starting my own build soon here, and had a question, hopefully you can answer. How is the playfield lightbar being attached? Is it on a hinge or anything, or just resting on the playfield screen? My reason for asking is, is there an easy way to slide the tv out if need be in the future?

Share this post

Link to post
Share on other sites

I'm busy getting all my parts together for vpinball, this definitely will give anyone inspiration

Amazing work and a lot of reading up.

Will be great in addition to my Mame cab and Mame vpoker cab i have build



Share this post

Link to post
Share on other sites

topper is finally mounted :)


plexi bracket for bart


from the back


played a round indy, I love the "3D illusion"


amazing yes. How much for the total project did you spend?


Share this post

Link to post
Share on other sites

  • Similar Content

    • By incessant
      Hi guys! I recently finished my newest project and thought I would share it. If I can figure out how to upload photos here  I will do that too.

      As with most MAME projects, the majority of the time is in the software. We had a difficult time getting both guns to work in MAME, and after pulling our hair out for a couple of days we found a thread mentioning that dual light gun support is broken in the newest version. We got an older version and BOOM. 
      There is still some software work a head. I have not tried to tackle dual light guns in M2. I may not bother. 
      I used the Ultimarc AimTrak guns. They had the best reviews in my research. They function very well. While it is impossible to get them optimized perfectly for every game, after some long hours in the individual game calibrations, I have the happiest medium I think I will find. Some games work much better (and more accurately) than others. 
      For example the hunting games are dead center at the middle of the screen, but end up about 2" off at the sides. I don't know if there is anyway to correct for that. Also some games play better at different distances. Overall, I am very please with it. There are probably a handful of games that play terrific, and the rest have their issues. 
      We used 2 nanoLED USB controllers and LEDBlinky to automate.
      The holsters are 3D printed.
      The original speakers are being used along with a super cheap 5W amp and a 100W yamaha subwoofer. 
      We used a Windows 7 PC. I hate the load times, but sadly the aimtraks only work with windows.

      Nano Led




      RGB LED Lights JUST fit in the buttons


      CP Art

      Custom TV & Marquee Stand

      Painted Marquee

      Maquee and Tv Mounted

      CP Attached


      Sorry Guys! I Don't know why some of the photos are rotated :/

    • By newoski
      RocketBlinky is a 3rd-party tool that can, in a matter of minutes, auto-generate an LEDBlinkyControls.xml supporting over 160 HyperSpin systems. Translation: It takes 99% of the work out of setting up LEDBlinky.
      Demo Video:
    • By 123fakestreet
      On the left, the original 1982 Mr. & Mrs. Pac-Man Pinball. To the right, the replica. Thank you to all cabinet builders for the inspiration, especially chriz99 and mameman!

      Playfield Cabinet

      The front and back corners are cut at 45 degrees, with miter splines for strength. I also used wood bracing on the inside corners under the leg brackets. The leg bracket holes were drilled at 25/64" which gave a little wiggle room to tighten fully. One problem I ran into: I cut the slots for the side rail plastic channels at 1/16" with a router and Harbor Freight slot cutter set, but after painting they weren't wide enough to hammer the rails down into, so I had to redo that. Slots for the TV were routed to 1/2" leaving only 1/4" thickness. I was worried about this in back with the weight of the backboxes so I made 2 bracing pieces to reinforce. The TV ended up being slim enough to install (fully cased) from the top, if I had realized that earlier I would not have routed the slots all the way back. Because there is a Samsung logo tab sticking out on the bottom of the TV, it sits slightly off-center to the right in the cabinet despite the routing, it is only about 1/8" off though. The remote works fine (needed for switching to 3D) as the sensor is on the bottom right of the TV so ends up near the buttons on the left side. 3D does work, check out the thread by toxie for more info. Because the Samsung UN46ES7100 is active shutter, you need two pairs of glasses turned sideways for it to work and not see black bars. This does make it hard to see the backglass and DMD, and the resolution is cut in half to achieve 3D. I don't turn on the 3D very often but it's nice to have, I did angle the TV downward anyway so it gives some illusion of depth though 2D.

      3/4" Birch Plywood
      Kreg 1-1/4" Course Pocket Screws (every 6 inches, 2 inches from edges, with wood glue)
      46" Samsung UN46ES7100
      Widebody Lockdown bar
      Williams/Bally Lockdown Bar Lever Guide Assembly
      BLACK KNIGHT (Williams) Side rails pair
      Spiral nail .15" dia. x 3/4"
      Screw 6-32 x 5/8" hex
      4X Pin Cushion Cabinet Protectors
      4X Williams/Bally New Style Leg Bracket
      4X Heavy Duty Leg Leveler With Nut
      4X Leg Leveler Rubber Castors
      4X Bally Gray Legs
      2X Williams/Bally WPC/WPC95 Playfield Glass Side Rail Plastic Channel
      Williams/Bally WIDEBODY Playfield Glass Rear Plastic Channel
      Grill - speaker 7" x 7"
      Vent grill - metal 2-1/2" x 19" (cut to size)
      3/16" Smoked Plexiglass
      1-1/8" Double-Bitted Lock
      Lock Plate
      Piano Hinge

      Upper Backbox (A bit taller and wider to fit screen)

      Also routed to 1/2" to recess the decased screen as much as possible. Routing on all sides presented a problem, how to get the TV in there? I ended up leaving the right side unglued so it is removable, the hole in the bottom is large enough to get a screwdriver in there and tighten with pocket screws. The top trim piece is not glued in as it would cover the screw holes holding things together.

      3/4" Birch Plywood
      1/4" MDF (Backglass retainers)
      Kreg 1-1/4" Course Pocket Screws (every 6 inches, 2 inches from edges, with wood glue)
      (all plastic/metal trim was cut to size with a Dremel Fiberglass Cut-Off Wheel)
      30" NEC LCD3000 (originally Dell W3000 but it would not turn on reliably, a common issue I have read online)
      Trim backglass 3/16" side plastic set-3
      Bally Stainless Lift Trim
      3/16" Smoked Plexiglass

      Lower Backbox (A bit taller and wider to fit screen)

      For now, I am using the HannsG instead of a real DMD. (I wanted to use custom color settings and not have the intense reflection on the playfield glass) It is routed about 1/2" and wedged in there tightly. I had to make the box taller, which I justified by having the combined height of the backboxes be the same as a Williams widebody. Theare are 2 pieces of plexiglass with a paper bezel inbetween.

      3/4" Birch Plywood
      1/2" MDF (Backglass retainers)
      Kreg 1-1/4" Course Pocket Screws (every 6 inches, 2 inches from edges, with wood glue)
      (all plastic/metal trim was cut to size with a Dremel Fiberglass Cut-Off Wheel)
      15.6" HannsG HK162
      Trim backglass 3/16" side plastic set-3
      Bally Stainless Lift Trim
      1/8" Smoked Plexiglass, 1/16" Smoked Plexiglass


      Ideally a spray gun is the way to go with stencils, but I like the control of using a foam roller, although it requires a lot of touch up. 2 coats of latex Kilz2 primer, and then latex Glidden Satin Interior, 3 coats blue (Rhapsody), 5 coats yellow (Sunny Side Up), 5 coats pink (Passion Flower) The black was done with 2 coats Zinnser BIN primer (spray can) and 2-3 coats Rustoleum Satin Black (spray can). One thing I re-learned about spray paint, if you're going to do more than one coat, don't space them out too long, I did a second coat of black the next day and it puckered, had to redo it. Another coat should be applied within an hour.

      Bally Coin door/Cash box

      I took the coin door completely apart and used a wet sanding sponge (up and down for uniform grain) to buff out scratches, it worked great, used the same on the trim. For the coin insert panel/coin mechs and chutes I used steel wool. I wired the lights in series to the PC, using an extra molex to SATA adaptor to splice the wires. #161 bulbs are the correct voltage. I put the shooter rod/knob in the drill and spun it in steel wool, shined it all up, did the same for the coin return button. You can use steel wool on the cash box, but it takes off the zinc coating, leaving it clean and shiny but different than the original.

      Bally Coin Door & Trim
      Bally Cash Box
      Bally Sticker
      3X Bally price plates
      Carriage bolt set
      7/8" Coin Door Lock - Single Bitted
      #161 Eiki Bulbs


      The integrated sound on this motherboard is from Realtek, nothing special but you can route seperate audio streams to front and back outputs, which is now a feature in visual Pinball. (Doesn't work in Future Pinball, sound only comes from the primary backbox speakers) I have the Logitech Z506 5.1 speakers on the back outputs, and the Logitech S220 2.1 speakers on the front headphone jack. So backbox rom sound is separated from cabinet mechanical sounds. I am missing authentic force feedback, but I can control the volume of the whole cabinet. I copied the small bottom vent holes in the original cabinet, and the speakers are placed nearby. In the lower backbox, the speakers are facing toward the bottom hole that overhangs the playfield. I like that the speakers aren't right in my face, and without a speaker panel all 3 screens are blank when turned off.

      Logitech Z506
      Logitech S220


      The playfield cabinet is not as tall as a Williams widebody, so I could not fit a shelf for the PC above where the legs attach. Because of this I just kept the PC in its case, which could technically be pulled out the back if needed, a tight sqeeze though.

      Windows 7 Ultimate x64 SP1
      Intel DP55KG Motherboard
      Intel Core i7-860 2.80GHz
      Kingston 4GB DDR3 1333
      Samsung SSD 830 Series 128GB
      Antec Sonata Designer 500 Case
      2X Galaxy GeForce GTS 250 1GB
      2X Nexus 92mm Real Silent Case Fan
      750W Antec Earthwatts Power Supply
      Smart Strip LCG3 Surge Protector
      Logitech mk260 wireless Keyboard & Mouse
      (these work OK but sometimes lag)


      Coin return button=cabinet on
      The PC momentary switch is in the first coin mech, I just cut off the square top of the switch so it works. Not all coin mechs fit this method, I had to use a metal one from a Ms. Pac-Man. The PC is plugged into the Control Outlet on the Smart Strip and automatically switches everything else on.
      Coin door start button=Start (also I-PAC2 shift button)
      L Flipper Front (shifted=L Nudge)
      R Flipper Front (shifted=R Nudge)
      L Flipper Back=secondary L flipper/magna save/buy-in (shifted=Insert Coin)
      R Flipper Back=secondary R flipper/magna save (shifted=Exit)
      I didn't put in any analog nudging, maybe if I improve at pinball I will, because the above shift settings are not very functional.
      Shooter (shifted=Fwd Nudge, Genre in Hyperpin)
      The shooter hits a microswitch wired backwards as NC (Normally Closed)
      I used Speedbor bits for the button holes, 5/8 & 1-1/8.

      4X NOS 1-1/8 short Leaf Switch Buttons
      4X PAL nut 5/8"
      4X VPCLeaf Switch (works well with I-PAC2 low current)
      Switch - miniature drop bar target
      Bally Shooter


      I replicated the original backbox vents, which I wouldn't recommend as most projects have large strong fans. I routed out a long air intake under the cab for the PC, and there's also the speaker hole, which was done with a router using a makeshift jig. I ran a 92mm case fan up into the bottom hole of the lower backbox, and another for the upper backbox, so it has upward airflow. I didn't notice excessive heat in the lower cabinet, the upper backbox (NEC LCD3000) gets hotter though. I covered the routed area in the upper backbox with thermal aluminum tape. I was still a bit concerned about airflow so in the end left the back slightly unhinged and have a small desk fan route air out the back.
  • Create New...