Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,051 topics in this forum
-
Just converted my modules folder to the new emu-based HL2 and created a listing so I know what emu does what systems. I know this list is not complete, but it matches what I had modules for. I know this is something a few have asked for over the years, so it may help some of you who come across it: List moved to: http://www.rlauncher.com/forum/showthread.php?2803-Best-Emulator-For-Each-System If anyone wants to help complete it, please post below.
Last reply by nikkisixx, -
-
- 1 reply
- 159 views
The most I've come across are .mp4s or .pngs, and the themes in Attraction II are "smart themes" that have specific files that I havent seen included in any download on this forum or others. I see people have successfully added these consoles to hyperspin and I just want to know how I can accomplish the same.
Last reply by Andyman, -
- 3 replies
- 152 views
donde consigo los módulos ahk?
Last reply by jesfknkrys, -
- 0 replies
- 99 views
Alguien tiene Mednafen v0.9.15, por favor
Last reply by hevede, -
- 1 follower
- 4 replies
- 229 views
Ó Hello, could anyone help emulate Funtech Super Acan, I saw that it uses Mame, I wanted to use Retroarch with the Mame core
Last reply by floatingyeti, -
- 1 reply
- 123 views
I'm trying to setup Nestopia with Hyperspin, but when ever I try to launch a game I get a "File not found!" error. These are the settings I'm using, it is pointing to the right ROM location.
Last reply by 32assassin, -
- 1 reply
- 126 views
Is it possible to run an application like Launchbox from the Hyperspin wheel? If so, how? I believe I have Hyperspin Attraction II. Thanks in advance.
Last reply by RLBradders26, -
- 0 replies
- 120 views
Is version 1.0 of Daphne paid only? Anyone have some experience with Hypseus Singe? Is it better ? Worse? How to setup with Laser roms in Hyperspin. Any links to a proper setup vide maybe? TIA!
Last reply by gr0bda, -
- 0 replies
- 97 views
I am looking at setting PS1 up using m3u files for all disc games (instead of usual multi disc in RL) and want to know what actually happens when you come to the end of Disc 1 if you are using an m3u file, instead of the usual Disc 1 ? Does it just boot to Disc 2, 3 , 4 etc automatically when you complete a disc ? Any help appreciated (before I go and waste my time changing my setup) 😉
Last reply by Creezz67, -
- 0 replies
- 138 views
Suyu emulator (replacement for Yuzu) has now been released. All working fine so far and setup in Hyperspin/Rocketlauncher easily enough. Check out the short video of the new Home Screen feature they have added in Suyu. Downloads now working on their site as of 23-03-2024
Last reply by Creezz67, -
- 0 replies
- 109 views
Hi am new to this forum am just wondering how to find save state and delete them on hyperspin and any one no how to play Nintendo 3ds games they do not load up thank
Last reply by 1979weman, -
- 3 replies
- 157 views
Did the xml files move to another system? It's been a very long time since I've been here and I'm trying to add another console to my setup. I don't remember if it was moved to the RLauncher or maybe even somewhere else. I'm looking for the Wii xml for use with Dolphin emulator.
Last reply by nguerra, -
- 1 follower
- 3 replies
- 191 views
Hello, Was previously running MAME v0.191 in RL. Recently upgraded my MAME to version 0.261. RL worked fine when launching my old MAME in RLui but now, with new version 0.261, I get this error: "Error: Unknown option: -nouse_bezels" In RL I: -On global emulators I switched to the new MAME .exe path -Under MAME system under emulator, I deleted old Rom path and set the new Rom path. Any help much appreciated.
Last reply by thomas3120, -
- 2 followers
- 5 replies
- 209 views
Hello, rfancella years ago walked me through setting up winuae (huge help! thanks to rfancella). So the emulator launches games fine, I go into the game port part in winuae and (I-pac4) controls using F12 in game and I believe it's in Config tab I save the config file and exit the properties window (but not game or emulator). The game plays great and mouse work. When I exit emulator or when I hit ESC in RL and select another game and launch it, the controls seem to go back to their default settings (I believe). For the life of me I can't remember what I'm missing and in rfancella's tutorial I don't recall seeing something about this (I could be mista…
Last reply by gigapig, -
- 2 followers
- 1 reply
- 139 views
Hi all Please forgive me if this is in the wrong section and please move accordingly. After some time of setting up a pc with Hyperspin on i am now setting up the controls using an iPac4. Most things I can do but I'm having big headaches with ZX Spectrum which is the first computer I had so a must to set up. I have it working through Hyperlaunch HQ using the Spectaculator emulator and games load but I cannot configure the keys. I don't seem to be able to set up as a keyboard or joystick may that be with either using the ipac in keyboard configuration mode or running keyboard2xinput. its driving me insane as im not sure what I am missin…
Last reply by thomas3120, -
- 1 reply
- 134 views
I wanted to set up Android games on my HyperSpin, i used the BlueStacks 5 emulator for the games and used the .lnk files that BlueStacks generates when you install an app. The problem is that HyperSpin says the .lnks don't exist, but they are there! I tried doing it with HyperLaunch and still no result. Do i need RocketLauncher UI for this? Here is the error it launches, also sorry because it's in Spanish:
Last reply by SantiagoHyperspiner, -
- 1 follower
- 12 replies
- 407 views
Wondering if there's a guide on getting the Atomulator emulator for the Acorn Atom working in Rocketlauncher. Also the Module I have says it needs to be fixed by renaming the 'Send' function to 'SendCommand()' Also can't remember how to run the games that have no extension (did have it working before just can't recall) Below is the AHK module for Atomulator: MEmu := "Atomulator" MEmuV := "v1.13" MURL := ["http://acornatom.co.uk/"] MAuthor := ["Xttx"] MVersion := "1.0" MCRC := "EDB12D49" iCRC := "D5D08A2D" MID := "635737244662418638" MSystem := ["Acorn Atom"] ;---------------------------------------------------------------------------- ; Notes: ; The modu…
Last reply by floatingyeti, -
- 0 replies
- 100 views
so basically, I know how to update the RPCS3 games but can't figure out how to update the hyperspin list to apply the latest game updates.
Last reply by billythediablo, -
- 0 replies
- 106 views
Hi all, What emulator does everyone use to play N64 hacked games ? I have tried Simple64, RA etc and none of them work correctly. Is there something I am missing , because I literally have 500+ games IN Z64,N64 format, and only a handful load correctly. Thanks in advance for any info 👍
Last reply by Creezz67, -
- 1 follower
- 0 replies
- 103 views
hi i play my daphne and it work well but i want to make bat file for all my games how do i do that? i want help with that thanks ...
Last reply by retrogamer500, -
- 6 replies
- 200 views
Hi all, This seems to be the impossible task according to the internet Has anyone found a way to set a default exit button on an XBOX One controller to exit games in Hyperspin/RocketLauncher setup ? It's simple to do on an XBOX 360 controller, but for some reason the XBOX One controller will not allow any button to be held down or a multi button combo to exit, be it the back button or any other. Any help appreciated 👍
Last reply by Creezz67, -
- 4 replies
- 192 views
Hi guys, Go easy on me, I'm a complete novice when it comes to MAME emulation. I'm building arcade cabinet, I have a Dell EliteDesk small form-factor PC with 8GB ram and a 3.1Ghz Processor with a 2TB drive. I'm running windows 10 and have setup Hyperspin and Rocketlauncher. I have had success with MAMEUIFX0.159 based on Simply Austin's Youtube Videos, however his video is 8 years old, how relevant is that video content these days? If one of you were setting up MAME for the first time , which emulator version would you use and what ROM set would you go for? Also If I was to use newer MAME versions do I need to worry about modules? Thanks in advance…
Last reply by networkzeus, -
- 5 replies
- 181 views
Hi All This might sound like a strange request and I have been searching for this for a while but no joy! I have always had an issue with the newer mame version of space invaders. The sound is not how I use to remember when I was a kid. The newer mame has Midway sounds which is different to Taito and I want to use the old sound sample version of mame which was 0.114b but I can't find a no-nag, hi-score version. I tried to compile but get lots of errors when using MC64 and MinGW. Happy to compile but need help, like a proper tutorial and link to software that can compile with ease! Or even better, someone who just happen to have this no-nag version for me to use!
Last reply by Andyman, -
- 2 replies
- 136 views
Hi all, Does anyone know how to get MAME bezels (artwork folder) working with clones on HBMAME ? It's literally the same as MAME (where parent bezel works fine with clones) but I can't get it to work with HBMAME. All parent bezels work fine, just not clones. Any ideas ? Thanks
Last reply by Creezz67, -
- 0 replies
- 102 views
Hello, I use Kega Fusion but encounter 2 problems: - For the controllers, if I play alone, the emulator looses the config of the second controller. Is it a way to avoid Fusion to loose it (in Nestopia, I put "read only" on the config file but on Fusion, it doesn't seem to work - For the Game Genie / Pro Action Replay codes, they are saved but no load automatically for the game. Is it a way to launch those codes starting the game? Thank you,
Last reply by doohan,
