Support
Having problems with HyperSpin? You've come to the right place!
4,036 topics in this forum
-
- 1 follower
- 4 replies
- 151 views
Hi all, Not sure if this is something I have caused or a known issue. I have upgraded to Windows 10 and now I cant see any of the intro videos in Hyperspin. I can hear all of them just cant see anything. Does anyone know what causes this? They were working before the upgrade. Cheers, J.
Last reply by jedah, -
- 3 replies
- 136 views
Hi Hyperspinners, I'm using .bat files to launch emulators at certain save states (mainly to skip hardware tests where alternate bios isn't available, users of this cab won't know what a hardware test is, so I don't want them thinking they've broken it!). This works really well running HS with windows as the shell, but when I shell HS something changes, and my perfectionism kicks in. Due to the lack of a taskbar to minimise to, minimised CMD windows show as a tiny window header in the bottom left (over the top of HS) when I run the .bat (it's only there for a split second for most games, but like I said: perfectionism!) Possible solutions I've seen: I've seen people m…
Last reply by newoski, -
- 4 replies
- 190 views
I am very new, and very lost. I am having trouble with the TankStick. Example when I select Nintendo Arcade System: Popeye, I am not able to exit back to Hyperspin. Do I need to configure the game itself? Thanks,
Last reply by adeptjr, -
- 0 replies
- 118 views
I have retroarch running several systems on my setup and ran into a problem with 2 emulators, the gameboy and Sega Master System, The issue is when I go into the settings menu and change the settings for video and input and go to save new configuration it will not let me I push the X button and it will not save the new configuration, I am able to go through the menu's with the X/Z buttons. And a note that all my other systems work fine able to save my configurations there but not with these two systems not sure if anyone has seen this problem or knows something that I may have overlooked. Thanks
Last reply by jfprice30, -
- 1 follower
- 10 replies
- 166 views
Hi, I am a complete noob when it comes to Hyperspin. I've managed to partially set up Hyperspin, but I cannot setup my ancient SlikStik classic controller. Is there some sort of configuration file available for my device? I've already contacted Austin and he told I may need to use Xpadder but my device does not show in Windows. My controller works aces in mame, but I need help so I can navigate via the Hyperspin frontend. Any help would be greatly appreciated. I noticed that someone uploaded a file for the tankstick. Is that file compatible with my controller?
Last reply by mamedude1967, -
- 0 replies
- 188 views
Following error "Error at line 626. Line text: HideEmuStart(ms=2) Error: Duplicate function definition. The program will exit" I looked that code up and error 2 has to do with incomplete games. But they launch fine in RL Edit : forgot to include logs RL [code] 19:51:35:341 | RL | INFO | +N/A | Main - RocketLauncher v1.0.1.2 (www.rlauncher.com) 19:51:35:341 | RL | WARNING | +0 | Main - You have "Logging_Log_Command_Window" enabled. This is only for logging errors being dumped to the command window from an executable. This may cause issues with running some executables and needs to be turned off when you are done. 19:51:35:397 | RL | INFO | …
Last reply by bnuts77, -
- 2 replies
- 144 views
Let me first say, I LOVE the amazing hard work that has gone into making Hyperspin and its related themes and media the best for console emulation frontend. I did however after downloading the theme for SNK Classics discover that it had the background file for "Taito Classics" in error. Does anyone have or know where I can acquire the correct background.png for this theme or if the creator is aware of the minor mix up? Thanks again for all your hard work!
Last reply by Black Hazor, -
- 1 reply
- 297 views
Im posting this in HS and RL forums as im not sure what the prob is. All my games run from rocket launcher but when launching from a wheel in HS i get the error Cannot find c:\hyperspin\databases\"system name".xml. Now my hyperspin folder is H;\hyperspin133 and RL is H:\Rocketlauncher and i dont have a c drive installation Now the problem is, everything was set and working fine until today. The only thing i have done is do an update which failed, i then did the fix published on this forum of ,replacing RL exe 1.0.0.4 with 1.0.0.2. Here are my logs i hope someone can help as i cant see whats gone wrong RL: 21:01:08:899 | RL | INFO | +N/A | Main - R…
Last reply by earthprime, -
- 1 reply
- 144 views
so I have had issues with PCSX2 and Gzip.. finally got it running and not crashing, but still having two issues. After I run a couple games, when I exit PCSX2 it is not returning to HS properly. I get my desktop showing, no task bar, but can hear HS running. It is running just not getting focus. The other issue is, when I click to load a game, PCSX2 shows windowed then loads... does this on exit too.... This emulator has been a battle.. if you can help thanks so much. Thanks jim Ok So ..... I tried changing the times of 150 and 30 it did not work.. so then I tried deleting the above IF.... and it worked BUT after usually four games.. when PCSX2 goes back to HS,…
Last reply by demonseed, -
- 4 replies
- 141 views
Hello! I am using Artwork4 for screenshots. I noticed that as I move from game to game the screenshot animates out randomly. How do I disable this so that it just goes to the next screenshot with no animation or effect or anything? Thanks.
Last reply by SIMPLYAUSTIN, -
- 10 replies
- 253 views
Okay I got Hyperspin working at 90% Thanks to Simply Austin Videos only can't get working is the xbox360 control it works fine when I use emulators just not with Hyperspin Can't get a Button To Function at some other Buittons do work Here a Video of the Problem HELP!!
Last reply by Hyper666, -
- 0 replies
- 110 views
I've had my Hyperspin setup working for a couple years now, but somehow my settings got messed up. The key controls in Hyperspin got reset. I got them mostly working again, but am hitting a problem that I remember I had way back when I first set up but can't remember how I fixed. I have Esc set to exit Hyperspin, and it's also the key to Exit MAME. MAME is launched through HyperLaunch (an older version). Esc works fine for exiting Hyperspin, but when I enter MAME, the Esc key is not recognized at all. It's like some other program (Hyperlaunch, Hyperspin or something else?) is capturing it before MAME can see it at all. If I go into the menus and try to set Esc to even…
Last reply by epetti, -
virtualbox
by futek- 0 replies
- 114 views
Does anybody run hyperspin in vitualbox without problems or are there problems with the limited graphic support.
Last reply by futek, -
- 3 replies
- 104 views
I believe this is the ahk script I need... MButton::Esc But where do I put that code so that this works in the frontend as BACK and in all emulators as EXIT?
Last reply by Metalzoic, -
hi guys, i have absolutely no knowledge when it comes to hyperspin setups which is what lead me to this website http://www.hyperspin-systems.com/collections/all/products/external-drive-2tb-usb-3-0-with-hyperspin-85-systems-emulated i will be making a purchase from Australia so id just like to ask a few questions beforehand. 1. is there a recommended fightstick to use with hyperspin that is cost effective? i plan to run the program from my laptop then run a hdmi to a tv. so i was looking to either make my own usb fightstick or buy one with alot of button inputs. like this http://www.ebay.com.au/itm/371357187584?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX…
Last reply by jrock1000, -
-
- 3 replies
- 180 views
I just downloaded the new retroarch 1.2.2 from the liberto website in the folder named Stable/1.2.2/win-x64. After I installed (unzipped it) there are no cores in the core folder? Everyone is saying it comes with new cores so I am a bit confused. E
Last reply by ArcadeGirl, -
- 4 replies
- 173 views
Hey Guys PSSC2 worked like a charm last time I tried.. now it either goes to a black screen or runs in background somehow.. I have to hit CTRL+alt+Delete to get it to close. Not sure why it is doing this... I am also having issues with PSP as well. Only thing I recently changed was this Disable The maximize-minimize windows animation in windows 7 as I was having issues with xpadder.. (which no works great). Could that be the issue? I attached my log for PS2... any help greatly appreciated. [code] 20:24:05:658 | RL | INFO | +N/A | Main - RocketLauncher v1.0.1.2 (www.rlauncher.com) 20:24:05:658 | RL | WARNING | +0 | Main - You have "Logging_Show_Command_W…
Last reply by demonseed, -
- 2 replies
- 141 views
Ok you guys, I've been splitting out my arcade themes big time, but need to know something. What is the difference between SNK Classics and Neo Geo MVS? Would it be ok to just combine the 2 xml's into either category?
Last reply by BakerMan, -
- 2 replies
- 162 views
Hey Guys I can not get PSP to work with the new retroarch.. it keeps crashing? I am using previous version with psp and it works, but have read that ppsspp is a far emulator. I have tested it and it works, however it does not seem to work with rar or 7z? Does it? if so how? For new retroarch... I tried the ppsspp core, tried loading ISO and it just crashes.. Any suggestions/tips would be great!
Last reply by SIMPLYAUSTIN, -
- 1 reply
- 97 views
Running into an odd issue. I have: - trackball set up as a PS2 mouse - usb xarcade BYO board wired to 2 player/8buttons each - usb keyboard controls for HS are defaulted with the exception of CTRL being mapped to select When I am in HS and select an emulator, no problem. In any emulator wheel... i can scroll up using joy up/up arrow and trackball i can scroll down using joy down/down arrow and trackball but when i hit the select button (in my case, p1 button1 / CTRL) HS begins to load fade in for the selected game but JUST BEFORE the screen goes dark, the wheel bumps up 1 game. normally i wouldn't care since everything loads up.. but the video…
Last reply by kcorcoran, -
- 9 replies
- 457 views
Hiya! So I decided to build a cocktail cabinet, I will document on here with pics for you guys. My first question is 2 player mame games like pacman, or 1943. When player 2 starts the mame auto rotate the screen to accommodate player 2? Also how are games handled like Mario? Thank you guys so much E
Last reply by 32assassin, -
- 1 follower
- 1 reply
- 107 views
Can someone help me out? I cant seem to find out why this is doing this. I have followed all the tutorials I can find to get this to work after the hyperlaunch to rocketlaunch change but now this error is happening. Any help would be greatly appreciated.
Last reply by gigapig, -
- 3 replies
- 132 views
I am running Hyperspin 1.4 and RocketLauncher. The Wheel Filters rom only option is no longer there, and i am unable to get hyperspin to filter by the roms that i have. I have my roms path set, I also have my file type set in hyperHQ. Any Help?
Last reply by dmoseder, -
- 3 replies
- 166 views
Just wondering what is the cpu of choice to run Hyperspin in all its glory regardless of the emulators installed. I considered to run up to gamecube or wii but may fall back to N64 and keep it truly retro. Its for a cabinet in my garage and thats all it will be used for. I have various parts laying around including 2 GTX 460s and a 1000w PSU and 16gb ram. I know its been asked 100's of times but need it to run the current version of Hyperspin. Thanks Would this system from tigerdirect be appropriate? http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=9183875&CatId=11844 Or should I start with this one http://www.tigerdirect.ca/applica…
Last reply by Brainiac, -
- 1 reply
- 114 views
Hi There! I've been building my first cab for a few months now and really enjoying it. I've been soaking up knowledge from the forums and Gigipigs video guides for a while. So far I've been set. I've managed to sort out a customised wheel with it's own default theme loading both cart based games, games with save states and PC games too. Until recently everything was going smoothly - however today I've encountered the first issue that's truly got me at my wits end. I'm having an odd situation where my wheel loads fine until I change the game, then the video vanishes - no other videos load, not even the first video that originally loaded. Why I'm struggling to ge…
Last reply by Last Action Gringo,
-
Popular Contributors
