Support
Having problems with HyperSpin? You've come to the right place!
4,032 topics in this forum
-
- 3 replies
- 271 views
I've have gone back to scratch on Xpadder. Deleted all my configs and started again. Thought I'd start with something easy, like MAME. I have 2 Xbox 360 wireless pads. I have set them up following the instructions, and they work perfectly, BUT!! when just one pad is connected, Player 1 light comes on on the joypad and it controls Player 1 in MAME. When I connect a second pad, Player 2 light comes on on the joypad, BUT the controls are then reversed, ie. Player 1 joypad controls player 2 and Player 2 joypad controls player 1. I've spent hours on this and can't work it out - anybody save my sanity!?!?!?
Last reply by zerojay, -
- 5 replies
- 502 views
Okay I've been out of the loop for a while, as it stands my cabinet is currently and has been in a "complete" stage for a long time now and while I'm happy to just leave it 'as is' I'd like to keep up with the times and ensure I can continue to add games and content in the future. I have a few questions and concerns regarding upgrading. From what I've gathered so far from installation instructions is that I do NOT replace any old files, it's a completely new installation which leads me to the following... - Where can I find instructions on upgrade procedures (can only seem to find installation instructions) - I put a lot of time and work into getting all my systems …
Last reply by xHyperSteve, -
- 1 reply
- 250 views
I have downloaded cart art for vectrex , gamboy advance and other consoles , i cant seem to get the cart art to show , im using the default system themes . for vectrex , i cant box or cart art to show , and in gameboy advance i can only see box art . I have tried the usual putting the art in different files (artwork 1,2,3,4) to see if they show when putting them in a different file . I have snes working with both box and cart art so i think its a theme issue but not sure how to sort it out , i see people on youtube with the same themes showing box and cart . thanks for any help
Last reply by 32assassin, -
- 1 reply
- 215 views
Hi guys. Quick one, hoping it's something simple. Firstly I'm using an ipac2 which us working fine in fans both via emu and through HS. However, while I can scroll the list and select games etc no matter what button I set in HyperHQ I can't get it to spin the wheel. Until tonight the Faves and Genre worked now they don't also. Tonight I have been fiddling with setting up hyper search. That worked at first but now that has stopped working too. It's not purely down to that though as like I say the Spin never worked. Any clues? Has this happened to others? Paul
Last reply by rascaluk, -
- 6 replies
- 431 views
Hello All New member here from Scotland. Bit of background... I Inherited a Hyperspin setup from a mate who recently moved away. It's an internal HD with quite a lot of systems and games on it. I put the HD in my htpc setup and managed to get a few games running (kind off) He had it all set up for drive D: on his system but i tried to change it all to drive X: as i have a few hard drives in my system and my current D: drive has a lot of stuff installed on it so i think it would be better to just change the hyperspin drive to X: i changed the required rom and emulator paths in hyperHQ for the systems that dont use relevant paths. What happens now is if i go to star…
Last reply by rascaluk, -
- 9 replies
- 557 views
Sorry if this has been covered, I just have not found a solution yet. I have My SNES setup in Hyperspin working great. Roms, Wheel and box art. All showing up perfectly. Most video snaps are working as well. But probably about 50 snaps are not working. I just get the exclamation triangle icon saying to download from emumovies.com. And it seems to be snaps for more popular titles too. I believe it has something to do with all of the rom revisions I have for each game. I don't understand why I have all those revisions, they just came with the No-Intro romset I downloaded. Also, there are a TON of Roms (Japanese games) that are not showing...But I don't really care about t…
Last reply by Kolk1604, -
- 7 replies
- 484 views
I've been playing with Hyperspin and love the front end a lot! I'm building a cabinet that is primarily for emulating mame games (and some console stuff), but at the same time I like to play a Visual pinball table now and again. So in my cabinet I'm using an actuator to raise and lower the vertically mounted 39" tv from roughly 70 degrees for video games and then lowering it to 40 degrees for playing pinball. Its certainly not perfect but a good compromise for me. And space saving. I'll be using a USB relay control module to control the actuator (though some relays). Any recommendations on USB modules? So my question is, is there a way to launch a program when a whee…
Last reply by Nerbflong, -
- 2 replies
- 459 views
Hi all, I have downloaded the latest xml for MAME from the FTP (thank you Brolly) but I seem to be having an issue with it. If I use the full list as my MAME.xml in the Hyperspin database it says that I have several roms missing even though I have a verified (and currently seeding) MAME 153 set from PD. The games that are missing are all CHD games (i dont have any CHDs) but it isn't all of them. I would understand why the audit is failing if it was all of the CHDs (i would guess that the audit searches for them as well) but this is only some of them. I have pasted below the missing roms. Does anyone have an idea why this is happening? Is this xml not from the default…
Last reply by jedah, -
- 4 replies
- 1.1k views
Hello, I have been having problems getting games to run, so after advise from board members I have properly matched the sets and running ClrMamePro. However, I just changed my MAME,exe from 0.148 to the newer version of 0.149 and all games load to a black screen. Here is the kicker, the emulator is working because on one of the NEO GEO games I tapped the joystick controls and I can hear the intro music and then the game. The screen is absolutely black. When I revert back to 0.148 I have both audio and video. Anyone know why this is?
Last reply by WyldChyld695, -
- 8 replies
- 481 views
I don't know where to report hyperspin bugs but here it goes: Despite having problems with the modelines (i fixed those using win modelines) i was having another issue, where the hyperspin would load up, and i was unable to select either system. if i pressd "esc" hyperspin would pause but the option that says "exit - yes or no" wouldn't appear. It seems that you need your audio card installed , this happened to me because i was doing a fresh intall trying to recover the error with the mode lines (i didn't had a clue it was that) and i only installed the basic, since the audio wasn't a "must have" to test the software i didn't bother. This is a very minor bug, but it …
Last reply by zerojay, -
- 4 replies
- 475 views
I launch Nestopia with hyperlaunch and everything is working fine but the bezels don't show up in nestopia. I know that the bezels are loading because when I alt+tab the bezel is there loaded but it is no showing on top of the emulator as it should. I tried every options for the bezel in hyperlaunch and changed some things in the nestopia.ahk for the bezel to show but nothing has worked.
Last reply by knewlife, -
- 8 replies
- 1.1k views
Hey, I have the full 10k roms set of mame for 0.141 and I would like to know if it's possible to sort it to just show neo-geo roms for ex. Can this be done? How?
Last reply by Dogway, -
- 3 replies
- 318 views
hi folks, So i had problems with mednafen sound and i noticed that editing sound.buffer.time to 200ms fixed the issue, but... when i launch from HL, the setting seems to be forgotten I had the same problem with the video driver, but hyperlaunchHQ allow me to choose it directly... but i can't find a way to choose the sound.buffer.time I will probably must edit a command line somewhere in the AHK but i just can't find a "RunEmu" line, so... Hope you can help me
Last reply by coincoincoincoin, -
- 3 replies
- 614 views
In all Collections from NES at Emumovies missing this Videos.... Choplifter, Space Harrier, New Zealand Story, Blue Shadow, Crisis Force Video is Missing...
Last reply by newer, -
- 4 replies
- 311 views
When I am on the mame emulator instead of a video it is a frizzled blue/black static with the audio can someone help me
Last reply by gigapig, -
- 8 replies
- 399 views
Hey all, I'm having a really hard time getting any emulator to launch via Hyperlaunch/HyperSpin. I'm sure I'm doing something newbish, but any help would be greatly appreciated. I'll attach my ScreenCap.
Last reply by warpsycho, -
- 4 replies
- 299 views
I've searched through the forums and I haven't been able to find a solution or answer. I need help... My control panel has a trackball with three mouse buttons above it which works out great when navigating around the desktop. In game, I use these buttons as credit buttons and pause buttons. The problem is that I would like to map the mouse buttons to be used in Hyperspin and can't figure out how to go about doing so. I basically want to map the mouse buttons to back out and exit when in Hyperspin. Any suggestions? Is it possible? If so, how? Thanks for any help!
Last reply by 32assassin, -
- 6 replies
- 369 views
Hi just addedd vectrex to my hyperspin using hypersync , and when i go to click vectrex on the wheel i get : Cannot find GCE vectrx.ini can anyone help me , im also looking for box and cart art for the console cant seem to find them . also need module for ParaJVE 0.7.0 but says there is no modules in the module section thanks for any help
Last reply by gigapig, -
- 6 replies
- 703 views
Hi, It's been a while I did'nt used Hyperspin, but now a made my own mini cab, (see this topic, in french ), and installed HS 1.3 on it, I noticed that browing the wheel with a joystick is laggy and not precise at all. For example, it offens jump 2 or 3 games at a time. Is it a known HS bug ? Are there solutions for it ? Cheers, Mike. My daughter playing on the cab :
Last reply by veganpete, -
- 3 replies
- 495 views
Hey guys im runnign into a strange problem i cant figure out. I got alot of things working and setup with hyperspin, there is 1 thing thats strange. So when you highlight a system it shows you the animation, plus a lil video of some game highlights before you actually click into the system to see the games. Well that video for some systems is not working, IT works for some system's and not for others. Ones that dont show a grey or blue static/video. I looked through the settings cannot find any setting that referes to the video when you scroll through all your systems that plays. Again this is not the video that plays when you highlight games, those all work, Just the Vid…
Last reply by dougan78, -
- 4 replies
- 454 views
Hello, I'm not very good at excel. I'm curious if it's possible to copy all the meaningful information of a rom in the xml database that matches a rom filename I have (thus dropping those I don't have) Maybe making one column with my MAME roms and another for each entry of game. Then I copy only those (3 or 4 lines) that found a matching filename with the other column using a formula. Why do this and not an xml creator? well, xml already have the full rom names, game information as well.
Last reply by Dogway, -
- 20 replies
- 1.8k views
Hi, Can someone please confirm which version of MAME is preferred to get the full confirmed ROM set working? I've currently got v0.148b of the command line version working but some of the ROMs which seem to be included in the full rom set (bzone2 for example) aren't recognised. Should I be using MAMEUI or some other version to get ROMs like this working? Many thank Pete
Last reply by wiredworm, -
- 1 reply
- 259 views
Everything was working fine, then suddenly when I hit enter to load the rom, nothing happens. I remapped the load key from Enter to 1 with the same results. I can use the same key to exit hyperspin, so its not the keyboard. I decided to update mame to .153 just in case something in mame got corrupted and mame loads fine. not sure why its doing it or how to fix it.
Last reply by rfancella, -
- 2 replies
- 333 views
Like it says in the title. Is it possible to have a wheel that as you scroll through the games it does not change the movie for it? It just continues to play the same movie all the way through and it does not restart each time you scroll?
Last reply by SIMPLYAUSTIN, -
- 1 reply
- 295 views
i feel like a dummy but i cant seem to find these files i remember them be in the download section but i dont see them can someone please help
Last reply by gigapig,
