Support
Having problems with HyperSpin? You've come to the right place!
4,038 topics in this forum
-
- 4 replies
- 174 views
Hi, So i am updating to a new rig. I used to run hyperspin on my laptop basically as a trial run to teach myself how to get everything up and running. Now my rig is mostly put together (still waiting to buy graphics card). I have a 500g SSD and a 3tb mechanical drive. My question is will hyperspin benefit from being run from my SSD. My emulators will obviously be installed on my SSD and I keep my roms and video snaps on my 3tb. However my Hyperspin folder is quite large because of all the media on it (artwork, wheels etc...) So in short hyperspin on SSD or 3.5inch Russell
Last reply by rastan, -
- 1 follower
- 5 replies
- 227 views
Hi all. I set hyperspin up on an external drive (D). Everything fine. Just has mame on it. Moved it to the © drive on the same computer as it will fit on (and I didn't think it would at first) so no need for external drive. I've changed everything as far as I know. All settings in hyper hq, rocket launcher, directories in mame, been through as many files as I can see and changed directories from D to C, All I get now when I try to run a game is - Fatal error. Required files are missing. Games run fine in mame alone though I'm stumped.
Last reply by ictyyz, -
- 2 replies
- 188 views
Hello all. So after a major HDD Loss of about 7TB of data on my main Hyperspin HDD I am now in the process of re downloading and setting up a new drive,( with a better backup system) I have started to set up a few systems and here is the problem I am running into right off the bat; I have mame setup in RL and Hyperspin setup as my FE. I have my xpadder profile setup for my controller in both the global and the mame tab in keymapper tab in the RLUI. If I start a game in mame directly from the mame / game tab in RLUI the mame xpadder profile loads just fine... However........ If I start hyperspin my Hyperspin xpadder profile loads as it should and …
Last reply by tscottn, -
- 1 follower
- 12 replies
- 320 views
Hi Guys, I got an issue with my TTX games. My Hyperspin is still on my external USB drive so I can configure it on my laptop and use it on my arcade cab (don't like to configure while on my cab) :-) ). On my laptop everything is working perfect. When i take my USB drive to my cab and connect it over there, the games are not working. I see a small DOSS screen (see that also on my laptop), but short after I get the error as seen down here (or in the attached file, site won't upload it at the moment). 'There was an error waiting for the window "Blaz Blue". Please check you have the correct version emulator installed for this module, followed any notes in the module,…
Last reply by Machello, -
- 1 reply
- 195 views
when try to load up a game in rocketlauncherIU to test it it comes up with the message There was an error waiting for the window "RetroArch ahk_class RetroArch, Please check you have the correct version emulator installed for this module, and have the emulator working outside your Frontend first. Also turn off the fade to see if you are hiding your problem Using version RetroArch-v1.3.0-x86_64-Windows Thanks
Last reply by danwelsh, -
- 1 reply
- 172 views
hi guys, my bezels aren't working anymore after latest rl update....they work if I run a game through rl but not in hs....any suggestions?
Last reply by danwelsh, -
- 1 follower
- 8 replies
- 255 views
I'm setting up my first go at Hyperspin. All is going pretty well. There is ONE game which I would like to run with a non standard aspect, which to me works better with the setup I have. I have everything set up and if I run this game through mameuifx64 it comes up widescreen, all my saved settings/controls and no issues. But if I run it though hyperspin or rocket launch - the game reverts back to 4:3 with very large black bars on both sides. Normally the black bars and centered 4:3 are fine, since most I plan to add a bezel to. This game however I really do want running 16x9 or close, as I have it set up though the gui front end. Is there any way to get the set…
Last reply by gigapig, -
- 1 follower
- 1 reply
- 169 views
So I'm very new to Hyperspin and finally got everything setup and running but having issues getting Mario Kart 64 to run multiple controllers to play. Any tips would be amazing to help fix this.
Last reply by gigapig, -
- 3 replies
- 202 views
Hi! A few days ago i had a fully working system. As i'm configuring everything with RocketLauncher I don't try with HyperSpin often. The problem is I can run all systems from RocketLauncher, but not in HyperSpin. When i run a game in HyperSpin, it doesn't do anything but blink buttons and speech name of buttons but doesn't start the game. Where can i see the HyperSpin log to start to solve it? Thanks in advance!
Last reply by ci2own, -
- 0 replies
- 152 views
Hi. Trying to upgrade to platinum is proving impossible. I'm already a bronze member and have paid through PayPal. So I click on upgrade, get to checkout.. Then I get a rejecting message from PayPal? No idea why. Is there a section I can't find where you can edit payment information? getting nowhere Thanks everyone.
Last reply by Martin0037, -
- 0 replies
- 188 views
Ok so when i launch my Hyperspin all of my emulators load fine until i try Sega or Snes when i try to load one of those two the screen stays black, no wheels and the program is unresposive i have to close it out with task manager. It was working less than 24 hours ago, I'm using RetroArch for both, thought it might be the emulator itself but I'm also using it for 4 other systems that work fine. All games load in RocketLauncher. I attached the log file from hyperspin with a few emulators that opened and then the result of what happens when I try the SNES. Looks like the wheel just isn't loading. Any ideas would be great. log.txt
Last reply by Hardman, -
- 1 reply
- 151 views
Is there a way to change this number? I think it is set at 50. Thanks in advance.
Last reply by scapino1, -
- 4 replies
- 230 views
Hello, i am receiving the error; There was an error waiting for the window "ahk_class MAME" to become active. Please check that you have the correct version emulator installed for this module...... Before this appeared i had a complete working system and was finishing up and decided to allow the rocketlauncher to upgrade as it has been popping up every time i opened the UI program. once i got the error i thought 'bummer', but didn't think it was a big deal because i had a backup of the entire system. (NICE!) so i copied over my backup that i made before the update to take the system back before the upgrade. i try the system and i am getting the same error? (Uh oh!) …
Last reply by dummel, -
- 0 replies
- 181 views
The new databases section is great but clicking 100 + links and then creating genre.xml for every system seems laborious is there a pack somewhere with them all in? If not, what is the easiest way of creating the genre.xml for each system i don't want to have to write each one Thanks
Last reply by CarloCGC, -
- 1 follower
- 7 replies
- 181 views
Brand new here and I would appreciate some help. When I first started up Hyperspin, it worked well, but at some point, all of the audio shut off. When I go into the games, the audio is fine. Its also fine in Rocketlauncher. Byt with HS, no wheel sounds, videos are muted, etc. I think it must be a setting somewhere, but I can't figure out where. Any suggestions?
Last reply by gigapig, -
- 1 reply
- 161 views
Can anyone be of assistance to help me with a lightgun problem? when I use lightgun and play virtua cop (mame hyperspin) for instance the screen goes haywire when i press trigger quickly and screen goes back to windows desktop but i can hear game running in background of hyperspin? This only happens with light gun games. I think its a setting in windows but forgot how to fix it . Thanks a lot for any help:) Im running windows 10
Last reply by epayson85, -
- 2 replies
- 208 views
Hey Guys... I've had this issue with a couple of systems and searched quite a few times in google and in here for an answer but it doesn't seem to have been asked before so here goes.... Up to now with the Atari Lynx and Nintendo DS i'm getting an error message in the Rom Re-namer (Rons) that says "It appears that this XML file does not have any crc tags for your games. Either the system is not currently supported or your xml file is out of date" I've downloaded xml files from the hyperlist and tried to make xml files in Rons tools but to no avail. Has anyone else had this issue and managed to fix it? **EDIT** maybe obvious but none of thegames are appearing in R…
Last reply by superbike2, -
- 2 replies
- 156 views
so i have slowly been getting the hang of hyperspin (with alot of youtube help) i have struggled with the xml issue long story short, i wanted all the data for the roms i do have without displying the 1000s of other games had to use dons, but then it didnt give me the info at all so then had to manually go through the massive mame xml to copy and paste the info into my new mame xml whatever haha but NOW the texts for the games are ugly, they are simple but if i go to say, atari, the game titles are all pretty and styled according to game how can i fix this? i would like the game names to look nice also is there a better way to do the xml with the roms i …
Last reply by superbike2, -
- 8 replies
- 221 views
trying to figure out, why no intro video shows when i click on the hyperspin setup.....it just goes straight to emulators wheel....i also have checked in the............. "media\frontend\video"....................... folder, and there's in intro video in there and a transitions folder also, but still no video when i turn on hyperspin
Last reply by Metalzoic, -
Hi, please forgive me but I am a total noob to hyperspin and wish I had done some more research prior to starting. I am guilty of buying a pre built drive only because the website I purchased from looked very hyperspin official. guilty as charged and understand if this could potentially hinder my chances of getting support. I will be donating at some point to make up for my awful Crime! I had everything working up until lunchtime today and after trying to familiarise myself with the system I've done something which has removed all global emulators from HLHQ and when I load HS I get an error message MAIN MENU.XML IS MISSINIG Any help would be greatly appreciated.
Last reply by Macca80, -
- 1 follower
- 4 replies
- 211 views
Hi, I was wondering is there a new version of hyperspin? beqause when i download (beta-updates 12,14,15 etc) i only get version 14.0.0 from 10.5.2015 maybe i'm not looking good , of zo can some one please explane how this works ? Thanks Guys . Gumpie
Last reply by rastan, -
- 9 replies
- 731 views
hello i wondered if anyone could help please, i had an error this morning after putting a scripts folder in the wrong place and no matter what i did to try and fix it it wouldnt go, I did upgrade to the new MAME 0.175 and new roms but im still getting same error. I'll note the error below in the hope someone could tell me how to fix plz, I'm new to hyperspin btw. " There was an error waiting for the window" ahk_class Mame" Please check you have the correct version emulator installed for this module, followed any notes in the module and have this emulator working outside your frontend first. Also turn off fade to see if you are hiding your problem. That was the err…
Last reply by GMT, -
- 4 replies
- 190 views
Is there a way to turn off the intro tips at the beginning of HyperSpin? The pop up that says something like, "Windows + R to stop recording" or whatever it says. I think the intro looks really cool, that pop up is distracting.
Last reply by Abqshark, -
- 11 replies
- 229 views
Hyperspin was working fine, then I think I tried to start a bios file or something like that on my wheel and whammo, I can't enter any game now. This is for MAME. I can enter and exit a wheel with the keys I set (enter) and (esc), but not a game. Any idea of how I broke hyperspin? I'm not sure what log to post on here for help. I read something about a fade in error, might that have something to do with it? Thanks for any help or advice you can give.
Last reply by Abqshark, -
- 0 replies
- 172 views
After updating to windows 10 the analogs on my wireless 360 pad no longer function in HS. All other buttons on the pad function and i am reduced to using the D pad to navigate which is quite clunky. Are there any files i should redownload or something that might fix it? I have had a look at the Main menu.ini but nothing looks out of place. Any advice appreciated Thanks.
Last reply by CarloCGC,
-
Popular Contributors
