Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,051 topics in this forum
-
- 4 replies
- 68 views
I am stuck with this error while trying to run atomiswave or Naomi through RetroArch in RocketLauncher. It works outside of RL, but when trying to launch the game through HyperSpin, I get this error: There was an error waiting for the window "RetroArch ahk_class RetroArch". Please check you have the correct version emulator installed for this module, followed any notes in the module, and have this emulator working outside your Frontend first. Also turn off Fade to see if you are hiding your problem.
Last reply by Creezz67, -
- 1 follower
- 6 replies
- 50 views
For some reason, after exiting MAME there's a 30 second or more delay of blank screen before Hyperspin returns. I'm running only MAME .149, the latest Hyperspin version, LEDBlinky (only to automatically set the digital restriction mode on the 49-way joys with GPWiz-49s), and the Hyperspin Startup Script (was the only way I could get the joysticks to work in Hyperspin consistently). When running MAME from a command prompt, there's no exit delay. Any suggestions?
Last reply by tancrede987, -
- 1 follower
- 5 replies
- 36 views
I tried searching the forum for a solution to this but couldn't find it. I want to use 2 controllers for playstation 1 games but only 1 is working. I am using Retroarch 1.8.5 with the BEETLE PSX HW core. I am using 2 Brook Universal Fight Boards as XBOX 360 controllers. I am able to setup the inputs in core settings and save them but when I run a game only player 1 controller is recognized player 2 doesn't exist. I have attached images of my settings. I have no problems getting 2 players to work with Retroarch for nes,snes,genesis,SMS or 3DO. Also weird I rebooted computer now the controllers are being seen as xinput not windows 360 con…
Last reply by mankin, -
- 5 replies
- 49 views
Dear Folks: I write you because I have a problem I am not able to solve. When I lauch MAME on Hyper spin I have a bad image like the freq. is lower than it shoud be ( image flickers) and also the iamge itself and the colors are not good ( also similar like Scanlines). If I launch the games directly from mame emulator it works perfectly. Do you have any idea about whats going on and how to solve it? Thanks
Last reply by CyrusMzRG, -
- 1 follower
- 13 replies
- 183 views
anyone know how to get redream to work with hs/rl. i wanna use that emu as it has better rendering and emulation than others i have used
Last reply by Creezz67, -
- 0 replies
- 37 views
Hi All I have added an NDS emulator DesMuMe to my hyperspin/rocket launcher frontend. All is working in rocket launcher and when I press "Esc" it will quit out of DesMuMe. But when I use HyperSpin, and I press "Esc" it goes out and back to the nds game wheel but I can still hear the Emulator running in the background. I have tried using the autohotkeys (ahk files) to perform the 'Alt+f4' to exit but it just doesn't work. I have tried to mod the module and still it doesn't work. I am using the fork of DesMuMe X432R version. I generally use the "Esc" key to exit all my emulators. Any help would be most appreciated. Thx in advance. Update: After months of fiddlin…
Last reply by Slick8, -
- 1 follower
- 3 replies
- 48 views
Hi. Im new so go easy on me. I have recently bought an arcade cabinet with pc and hyperspin installed with 9000 games. i would like a few specific games that arnt on there and have no idea how to find games and add them on, i really want robocop 2 commadore 64 version any idea how to find it?
Last reply by gigapig, -
- 2 replies
- 42 views
First let me say that it’s been a while since I’ve been on the board so just sending some greeting to everyone and hopefully everyone is doing well. what’s the best way to play horizontal games on a vertical screen? ive seen a video of someone using a custom horizontal bezel for the vertical screen and I’ve seen others that seem to have the screen or resolution stretched? im definitely interested in trying to horizontal bezel route but can’t seem to find any for vertical screens.
Last reply by Spawk, -
- 1 follower
- 16 replies
- 132 views
I wish there was a way to save “slider options” permanently but through a research I did, everyone says it’s almost impossible. They say we have to do it for each mame game separately in each .ini, it’ll take an eternity. I tried to change: RocketlauncherUI mame HLSL: true or ini..nothing HyperHQ mame video scanlines activated...nothing Change mame.ini scanlines amount...nothing All of the above together simultaneously...nothing Hyperspin seems to “ignore” any change and open mame games with default video options. Funny enough, (as you can see to the image I attached), the upper half of slider options is always saved when changed (such as …
Last reply by dark13, -
Which ps1 emulator is the best for windows 10?
Last reply by pacmanman, -
- 1 follower
- 1 reply
- 43 views
Does epsxe emulator have action replay codes?
Last reply by Creezz67, -
- 2 replies
- 37 views
Hello: I decided today to add AAE to my hyperspin & rocketlauncher on a windows 10 PC I have everything setup (DB,themes,wheels,video,where the roms & emulator are located). But when I click on aae.exe nothing happens. I thought it was a compatibility issue but have tried setting the compatibility from windows sp, 95, 7 and none of them work the exe file still doesn't open/launch. what else can I try? Additional info: AAE emulator from 2008-12-13 Thanks in advance
Last reply by mankin, -
- 1 follower
- 1 reply
- 22 views
How save and load on the amiga emulator? 😀
Last reply by gigapig, -
- 1 reply
- 71 views
Is there nintendo switch emulator for windows 10? 😀
Last reply by dark13, -
- 1 follower
- 1 reply
- 45 views
So i have PC Games setup in RocketLauncher and it launches the games fine. But when the loading game screen is done it shows the command line box for a second or 2. How can i get a clean start like other emulators with out seeing the command line box?
Last reply by gigapig, -
- 1 reply
- 39 views
howdy... not really sure how to write these ahk things, "i tried pretending they were bat files but that didnt help at all.. " Any way.. I want to use retroarch for PSX emulation and ONLY psx emulation. I want it to use the medanfen_psx_hw_liberto.dll" if i wanted to do this from command line and i wanted to play as an example.. "army men 3d" i would type "C:\HyperSpin\Emulators\RetroArch\retroarch.exe" -L "C:\HyperSpin\Emulators\RetroArch\cores\mednafen_psx_hw_libretro.dll" -c "C:\HyperSpin\Emulators\RetroArch\retroarch.cfg" "C:\HyperSpin\Emulators\Sony Playstation\isos\Army Men 3D (USA).chd" hit enter and retro arch would start using the c…
Last reply by shambles1980, -
- 1 follower
- 3 replies
- 39 views
Does anybody have the xqemu.ahk file? thanks
Last reply by Creezz67, -
- 0 replies
- 49 views
Excelente tarde u noche... dependiendo del lugar y hora en el que se encuentren... (Como muchos no estoy seguro de que este tema valla posicionado en esta categoría, pero sino; que algún noble administrador me auxilie acomodándolo donde debe... Gracias) Tengo un problema con un emulador especifico ... el punto es que tengo un sistema o mas bien una lista de juegos personalizada con 156 roms de The King Of Fighters, el problema es que para reunir los juegos estoy usando 3 emuladores en el paquete 1 (Winkawaks 1.63), en el paquete 2 (Winkawaks 1.55) y en el paquete 3 Nebula... y para poder correr las roms del paquete 2 tengo que usar un (Loader) para el wi…
Last reply by Yagami821223, -
- 0 replies
- 19 views
I am finishing my cab and am using usb2gun pcb which are seen by windows as analog joysticks. Demul only uses mouse for guns. Joytomouse tool allows absolute mouse which tracks perfect. I could not get joytokey to track consistently it was all over the place. my question is can I have hyperspin just launch joytomouse with demul and close with demul? if so how?
Last reply by vartech, -
- 5 replies
- 71 views
Hi guys, I finally managed to configure the slider settings I always wanted for mame, but some games are lagging. I wonder if that’s due to wrong settings in mame.ini or has to do with hardware (graphics card, ram, cpu, monitor, external HD) This is my mame.ini: # # CORE CONFIGURATION OPTIONS # readconfig 1 writeconfig 0 # # CORE SEARCH PATH OPTIONS # homepath . rompath R:\Arcade\Mame\roms;roms hashpath hash samplepath samples artpath artwork ctrlrpath ctrlr inipath ini fontpath . ch…
Last reply by Haxorz, -
Hi guys, i need help using 2 aimtrak guns in all emulators configuring them in the emulators and rocketluancher, setting up with the aimtrak app and demulshooter. thanx.
Last reply by aguskapool, -
- 1 reply
- 24 views
SO i start up Hyperspin and when i try to choose a game the following error comes up: "Missing Rom extension in .ini" anyone help please?
Last reply by daggerlee, -
- 2 replies
- 78 views
What's the most recent system I can comfortable emulate on Hyperspin with this spec PC (still to add 4TB hard drive)? - Intel® Core™ i5-3570K Processor Quad-Core(3.40GHz - 3.80Turbo) - Nvidia GeForce GTX 1060 6 GB Memory Graphic Card Gigabyte Dual-Fan - 512GB Memory SSD Silicone Power SPCC - 8GB Memory Ram Patriot 1867MHz 2* 4GB - Cooler Master Hyper Evo 212 - 530W PSU Thermaltake Smart SE 80+ - Nzxt Gaming Pc Case - MSI Z77A-G43 (Intel Core i3/i5/i7, Gigabit LAN, Socket LGA1155) Motherboard - Asus Wifi Card + 2 Antenna's - Windows 10 Pro 64-Bit
Last reply by dannymc79, -
- 0 replies
- 15 views
Buenos dias, Necesito su ayuda por favor, estoy armando mi recreativa ya tengo el kit de palanca y botones configure todo etc, pero cuando quiero configurar los filtros Skyline en mame porque mi pc es vieja y no me andan fluidos los filtros Hlsl tengo un ( Penthium ) 2.9ghz 4 gb de ram y le puse el retroOs 2.0 cuestión que quiero activar los filtros de glsl modifico el mame.ini Agrego toda la linea del glsl porque no lo tengo y no hay caso, no se agregan los filtros mi mame tiene la opcion de por cada juego poner el filtro scanline tv pero quiero generar el filtro automaticamente al abrir un juego me pueden ayudar por favor? me estoy volviendo loco. muchas gracias g…
Last reply by tomaspeicoff, -
- 0 replies
- 20 views
Hello everyone, On Demul 0.58, PAL games run at 50hz. On Demul 0.7, PAL games run at 60hz so that I have asynchro between video (too fast) and sound... Does anyone have an idea how to force the PAL games in 50hz? Auto Region and Auto Broadcast selected. Thank you
Last reply by doohan,
