Support
Having problems with HyperSpin? You've come to the right place!
4,031 topics in this forum
-
- 0 replies
- 99 views
how much is platinum and how much after the 25% coupon to emumovies ?
Last reply by thcdgaf, -
- 1 reply
- 80 views
Complete Newbie sorry, Just trying to download the 1.4 beta and says. Permission not allowed. I did register and validate the account. Anything else I missed? Thanks,
Last reply by dougan78, -
- 22 replies
- 392 views
I know this has been talked to death, but... I still haven seen a definite answer I've seen a few vids showing the use of xpadder and startup script to map the hyperspin controller to a joystick, but when I use my P1 joystick and buttons to replace the defult controls it works once off but then I can't exit out of the rom using the exit/back button. Need to use a keyboard l. It's like once the rom starts it takes over the joystick and doesn't have the main controls mapped! I'm starting to think I need a seperate control board plugged in a seperate usb Making it in total 3 jamma boards plugged in (if I had 2players setup Similar to how we have all seen a Xbox 360 co…
Last reply by Spawk, -
- 7 replies
- 273 views
I've been seeing this problem on the boards a lot, but I can't find an answer really anywhere. Maybe it's obvious, but I can't seem to figure it out. The roms will load fine in MAME. The roms will load fine in RocketLauncher, but the roms will not load in HyperSpin. I did a fresh install of HyperSpin 1.4 beta and RocketLauncher. It's my understanding that I didn't need to use that transition tool for HyperLaunch to RocketLauncher since the beta doesn't need it, but I can't get the roms to load. Any ideas what I'm doing wrong? Some screenshot are below to show how I have things set up. I've sort of followed Austin's video tutorial, except that I have created separate folde…
Last reply by Styphelus, -
- 2 replies
- 101 views
I had a year of from hyperspin and now i seen all has changed i lost a hdd with my set up on made back up of roms. So i installed hyperspin and hyperlaucher updated to roccketlaucher with RL_Transition_Tool alworking fine but i just read somewhere that rocketlaucher should not be in same folder as hyperspin can some one tell me if thats right also cant seem to get Startup Script 108 to work had last 1 working great do i ned something else installed to get this working any help be great
Last reply by Emu54, -
- 11 replies
- 156 views
When trying to use hyperspin, i am unable to use Sega Genesis Roms, I can connect MAME just fine, but Gen will not connect. If i use Rom Renamer, it finds the roms and renames them, however if i use list generator it cannot detect the Roms. Inside of Rocketlauncher UI it finds the Roms, but cannot play them. it tells me no preferred controller and no joytokey.ini
Last reply by doomteam1, -
- 5 replies
- 544 views
Most likely a stupid question but I did try to research this on here. I have a two player CP standard with two joysticks and 6 button per player plus player 1 and player 2 buttons and im using a Jpac. Do I have to add buttons to my control panel for those menu controls in HS such as esc and enter or can I map my currant buttons through HS? Any help on this would be great or point me on here where to look.
Last reply by adamsarcade, -
- 1 follower
- 5 replies
- 136 views
I'm willing to donate via PayPal is someone will ftp into my laptop and set up. I brought home my arcade and have not been able to use
Last reply by griffin518, -
- 1 reply
- 76 views
Hi everyone, I am trying to quickly set-up a portable version of Hyperspin on my Gigabyte Brix PC. I have the remainder of today to finish this then I am off on vacation and would like to take it with me. Anyways. I am having an issue exiting emulators. Every emulator does not exit when I press the exit key that is set in both HLHQ and Hyper HQ. I copied this set-up from my main Hyperspin computer, where it works. Ideas? Thank you.
Last reply by Jon.Damico, -
- 1 follower
- 5 replies
- 153 views
I know it's hyperspin b/c emu plays perfectly outside. When I boot the game in hyperspin a popup window opens asking me to pick my game which I do and then the emu plays but I get only a black screen w/sound of the emu running and I must alt tab to get out. Seems like others have had this issue but due to the recent forums upgrade, none of the threads are accessible. sweet. I think this has something to do with the cfg file and the ahk I'm using. anyone have any suggestions?
Last reply by spiderrinaldi, -
- 1 follower
- 1 reply
- 99 views
I cannot get this to start I get an error
Last reply by gigapig, -
- 5 replies
- 145 views
As the topic says new to hyperpause. I think I get it turned on I went to RL/pause and hit true to set it to on. Now I have a few questions about HP that I am hoping you guys can help me with. Where do I set the key or key combo to access the menu? Do I need to set anything for game saves and loads? What systems support saves and loads? For the music play list, where is the folder? and can I just dump mp3 in a folder? Where does HS draw the images/videos from? is it from the HS/MEDIA folder or something else? Any other issues I need to know about? thanks jim
Last reply by demonseed, -
- 1 follower
- 6 replies
- 282 views
Weird issue that's driving me nuts... If I run Nestopia outside of Hyperspin to test settings... Works perfectly fine.. No issues. If I run Nestopia within Hyperspin to test settings... Works perfectly fine, except when I exit Hyperspin my mouse cursor is gone and the only way to fix it is to restart PC. If I play Nestopia in Hyperspin, regardless of what else I play, the mouse cursor will be gone when I exit Hyperspin. Nestopia it's the only emulator doing this within my Hyperspin setup. Fusion and ZSnes have no issues like this. Anybody know how to fix this for Nestopia? This happens in the old Hyperspin/Hyperlaunch and the new Hyperspin/Hyperlaunch. Tapatalke…
Last reply by Spawk, -
- 0 replies
- 81 views
Hi Guys I have had major problems so I started at the beginning to see if I did something wrong. I have mapped hyper spin controls using xpadder, the 1st use everything worked as it should amazing. This morning I open hyper spin when I move the joystick the wheel just spins and spins, my exit keys etc no longer work!! I am majorly stuck I find people posting links but unfortunately doesn't take me to the thread. Thanks
Last reply by bigbearrosssa, -
- 2 replies
- 178 views
Hi, i'm a big fan of amiga games. Playing them on my arcade machine is for me the final piece of the puzzle. I've googled around and found several 'definitive' tutorials regarding settingup whdload with hyperspin, but the trouble is... i cant even setup whdload with winuae.. i simply dont understand it.. I was wondering if someonce could advise me where i should start. Most tutorials are hopelessely outdated i think I have all these games. And i can play them fine from winuae / amigaforever. But the perfect scenario would be the complete front end experience. With movies and everything... and fast boot, no hassle... Thanks
Last reply by Dubbloseven, -
- 3 replies
- 142 views
Just installed the newest version, 10.1 I believe. And I hate it!!! It no longer let's you create a virtual drive, you can mount images still but it errored on the first image I tried. I have been a fan for years so I am not sure where to go for another solution. I could probably find an older version somewhere if I must but what else are people using? What the real problem for future hyperspinners is that daemon does not have a CLI anymore! There must be a good alternative, hopefully freeware!
Last reply by Spawk, -
- 0 replies
- 64 views
Any way to access it or add it in Dunno if I have wait for this feature in 1.4 or way to filter games for kids? Like pin code? Sent from my LGL34C using Tapatalk
Last reply by thcdgaf, -
- 1 follower
- 25 replies
- 435 views
Hey So I got a 5 TB drive, and well its full I still want to add some things if possible, but wondered if there was a way to trim things. Can I trim roms, trim duplicates, trim clones etc? Any Suggestions? I noticed many systems have (JAP) Japan systems etc... which are not in English.. just though maybe do USA only games? Thoughts? What do you do? I have compressed everything also. The issue is I have PSONE, PS2, Sega Dreamcast, Sega Saturn, and 3DO... the disc games are large.. Any suggestions? *Update-I double checked and PSX is USA only. PS2 is USA and Europe. Sega DC has a few Japan games..
Last reply by demonseed, -
I finally got mame to work without any errors and now when I choose a Rom it quick flickers and goes back to the rom menu. Any help would be great
Last reply by Metalzoic, -
- 2 replies
- 99 views
I've been working on and off with setting up my mame computer for awhile now and I am almost to the point of getting to the cabinet and controls. I recently found these Zero De!ay USB boards on eBay. Does or has anyone used these? They look simple enough to setup, but I wasn't sure how they work with the HyperSpin program. I tried hooking up my Mortal Kombat collector edition fight stick that was released for the xbox 360. It uses Happ controls just like in an arcade and even has the USB plug. I managed to get the basic mapping done of the joystick and buttons. But I found that some games still didn't work properly and there was no way to start or escape without us…
Last reply by Metalzoic, -
- 1 reply
- 82 views
My themes display great except they don't seem to be displaying Artwork1. Is there any reason why this might be happening?
Last reply by esoteric, -
- 1 follower
- 9 replies
- 168 views
hi guys, need some advice on where to look because i think my settings are correct. When i try to start a game from hyperspin i get a error : Cannot find rom with any provided extension. When i open RLUI, i can launch any game from the system audit screen. In the HYPERHQ app, i've setup the correct rom path and the correct extions. IN the hyperspin directory, mame.ini is also correctly setup So what more should i check now? (Yes, i do have the roms inside that directory)
Last reply by crptic1, -
- 2 replies
- 130 views
Hi, I have a PC games wheel in hyperspin. This works fine and I'm using the pclauncher module for this. In some games, you can have 3 or so "game profiles" to choose from, so you can save your game progress by selecting your own save file within the game. Some games however (most recent games actually) don't have ingame profiles, and just save their settings and game progress in the Windows Profile folder of the user i'm logged in with. The way they work is that they assume each user create his/her own windows profile and login at computer bootup. And the game settings are than stored in the windows profile. But on my hyperspin cab, I have only 1 windows prof…
Last reply by pintris, -
- 1 reply
- 133 views
hello everybody i am making a bartop with my favorite games (M.A.M.E, Naomi, Atomiswave & Type X) and i don't wanna have it in separated categories or systems, i want all my games in the principal wheel or menu, i was trying with RocketLauncher and the mame games work fine, the problem is with the other systems (and Taito TypeX are practically windows games) is there any form to have all games in only one wheel? i have the last version of hyperspin and rocketlauncher.... thanks for your help
Last reply by Metalzoic, -
- 16 replies
- 266 views
HI all, i have a working hyperspin setup with mame working - Yaj! Now i am trying to setup my SNES list trouble is that everything is setup right but when i try to do an audit in HyperLaunchHQ, none of the games are found. And i've checked, double checked, triple checked if the rom path to the SNES games is correct. it is in HyperlaunchHQ and HyperHQ. Also in the settings file. And as a result of this that the games do not work from within hyperspin obviously Would some one please advise me on what i should check futher? Thx
Last reply by SIMPLYAUSTIN,
