Support
Having problems with HyperSpin? You've come to the right place!
4,029 topics in this forum
-
- 1 follower
- 8 replies
- 163 views
I have spent about 4 hours reading things and can not seem to find out the answer to this. I have installed hyperspin with RLUI all per Austin vids. Retroarc is installed and rom path is to hyperspin rom folder. When audit all games they show up but are red. I read some things about the list names may not match. Hyper tool and don. The rom set I installed I have been using on stand alone emu on both homebrew and android. Do these not use the same naming list as hyoerspin or am I going in the wrong direction? HS and RLUI linked and working properly from what I can tell.
Last reply by SIMPLYAUSTIN, -
- 3 replies
- 119 views
Hey Guys, Just did the update to the new HS followed SimlyAustin's guide. Everything worked fine during that. I just noticed that when trying to click the rom path location in HyperHQ it will crash HyperHQ and cause it to close. I am using window 10 and did give HyperHQ admin status. Also noticed that a couple of my wheels will not open from HS main wheel. Atari 2600 when you select it to go into games it does not load the wheel it just returns back to main menu. any thoughts as to what I may have done? Thanks Paul
Last reply by Twiztedtechs, -
- 3 replies
- 125 views
I've just installed HyperSpin 1.4 with RocketLauncher on my Windows 10 (64-bit Pro) computer as instructed by the Simply Austin Youtube video below: There were no issues with the installation and HyperSpin loads as expected with one exception: My X-Arcade Tank Stick doesn't let me navigate. The wheel just cycles around and I cannot stop it. I have already set up the controls in HyperHQ as a keyboard controller and I was successfully able to assign my buttons, etc. but once I load up HyperSpin, the joystick does not respond. Not sure why. Any ideas how to get this to work? I had a similar setup with Windows 7 and didn't have a problem. Is there a …
Last reply by dreborn, -
- 0 replies
- 64 views
So i want to make my own small hyperspin console, i live with my girlfriend and she really doesn't want a arcade (big or small) in the appartment.. My question is, i really want a Mini-Itx board with a cpu inc. I am looking all over the place i find 100 off them. Any one have a good one? Please under 150$.
Last reply by trekdropp, -
- 1 reply
- 69 views
I followed SimplyAustin's guide to mame and everything works fine until I try to load in hyperspin. All games load in rocketlauncher , hyperlaucher , and Mameuifx.
Last reply by m1000con, -
- 46 replies
- 394 views
Hey guys. Ive been a lurker forever, and a big fan of hyperspin. Over the past few weeks ive slowly been putting together my ideal system and fixing problems from my first install (for example, having emulators or roms in other folders, directories, etc) so this time a did a clean install.. kept hyperspin on the root of the drive.. and just basically did it the smart way this time around. I have an internal HDD that i use for my emulation projects. My thought was that if i did it right the first time, id be able to simply copy the folders to a new HDD, change the drive letter to the original drive letter, and that would be it.. My first mistake, was setting my internal dr…
Last reply by Twiztedtechs, -
- 1 follower
- 6 replies
- 279 views
Can anyone point me to a decent tutorial/guide of how to do this..Finally got around to installing VP + FP & really enjoying them, but I would love to have selecting tables looking sharp in Hyperspin (Not Hyperpin) along with some wheel art, themes (I will find & use backglass or flyer images & make my own even if I have to) &if possible Id really like to combine all tables from both emulators in a single "Pinball" wheel in HS and be able to add favorites..... I believe I read the VP frontend for pinball had those options & forgive my ignorance but from what i understand "Hyperpin" is for cabinets only? I play everything on my flat screen TV ran f…
Last reply by 32assassin, -
- 20 replies
- 228 views
Here are some screen shots of what I have done to try and get it to work don't know what I'm doing wrong
Last reply by kylecp1979, -
- 9 replies
- 181 views
Hi just bought a mame arcade cab running on a Dell optiplex 780. Has 1000's of mame games running in hyperspin however I'm completely lost regarding adding more emulators and roms to hyperspin. If I go into the hyperspin setup I can change from a drop down list to genesis, ps 1 etc etc then when I boot up hyperspin it will show the relevant games on the wheel either with or without videos etc but none are selectable. Now when I go into my computer and open up hyperspin file then emulators it just says mame so I don't know if I have any other emulators or not. Help would be appreciated guy Thanks
Last reply by NewYears1978, -
- 1 reply
- 84 views
Hello everyone. I'm new to the forum and so far this site and forum have been a great resource, so big thanks to all those that make it possible. I have a question about hyper spin 1.4 If I understand correctly, hyper spin 1.4 allows for native joystick control over hyper spin menus without the need for joy2key or xpadder. I have a control panel set up with an ultimarc U360 joystick. Mame sees the stick and maps upload to make just fine, but I can't seem to get it to control the hyper spin menus. When I go in to hyper HQ to map the joystick controls, it doesn't seem to recognize the U360. Any one having similar issues or can point me in the right direction…
Last reply by Metalzoic, -
- 1 reply
- 87 views
I was making a custom console section and all was well but when it came to running the games I faced an issue. My system entery plays a variaty of Sega games using the Fusion emulator but it will only launch the Master System roms, when starting a mega drive rom Fusion complains about "There is not a valid sms file in the zip". In Fusion you choose a system you would like to boot and then pick a rom, but I don't see the emulators UI (I don't want to) when running it from Hyperspin. How can I get fusion to run any supported rom extension from Hyperspin. Thanks.
Last reply by rastan, -
- 3 replies
- 158 views
Hey guys, I've set up Hyperspin and rocketlauncher on my laptop, andb it seems to me every thing is peachy on the RL side of things. Emulators and roms are set to correct paths. "I can launch selected game through RL"(rocket botton) with no problem, it works, Im happy enough just getting to this point configuring this beast. SO When I run Hyperspin its a magical experience until I select a game. For Example I get this error: "cannot find c:\RocketLauncher\RocketLauncherUI\Databases\Sega Genesis\Sega Genesis.xml" Well I followed the path it was asking and the Sega Genesis.xml is in there. My RL frontend settings is set to Hyperspin.exe on default & active. My HyperH…
Last reply by Metalzoic, -
- 15 replies
- 222 views
Have been at this for a couple months and having ONE hell of a hard time. It's really starting to frustrate me. My original idea was to create PClone sets from Dat-O-Matic which worked out fine but I could never create an XML for HyperSpin once I cleaned my files up with clrmame. Then I decided just to stick to Hyperlists and I noticed my set had a bunch of Rev A, Rev B stuff in it ( a no intro set) which Hyperlist doesn't like, so I renamed those manually or with clrmame. Now I have all showing green in RocketLauncher games list, however if I load the same XML file used there in clrmame and scan, I get all sorts of wrong names (because it looks into the .nes file wi…
Last reply by Nocturnaloner, -
Ok guys so here is a few things. First off I bought a hyperspin setup from a Friend ( he owed me money and this was a trade off) it has basically every rom I could ever ask for on it. Now i have a arcade cab that I built to use with the original xbox and that was going great but wanted more so i took the hyperspin setup and put it into the arcade. The problems I am having is i know nothing about hyperspin but would like to make my arcade controls work fo systems that it makes sense to that is but I also have 2 wired 360 controls and will have 2 new kade to run the retro pads. Is there a way to make all of the work for everything simultaneously or am I out of luck. I can …
Last reply by NewYears1978, -
-
- 1 reply
- 58 views
I have Hyperspin 1.4 and a freshly updated RocketLauncher running on Win 10. I'm using joytokey to map my controllers to keys. It will launch the first game without issues. when I use the exit key to exit game (esc key), it leaves a hyperspin process running, which prevents me from launching another game. if I close the process, it will launch fine when I start it up again. I have tried setting the hyperspin and rocketlauncher executables to win 7 compatibility and run as administrator. I cannot find any other ideas on how to resolve. Anyone have another suggestion?
Last reply by Spawk, -
- 1 follower
- 5 replies
- 116 views
The main point to all this is: I ran anti-virus software and it deleted HyperHQ. Hi all - I've had an arcade machine for just a few days and have been checking it all out and seeing how it works. I have become familiar with HyperHQ and everything was going well. I was reading through the forums here, trying to learn what xml files were and how I might be able to introduce PS1+2 games to the machine. Unfortunately, the previous owner seemingly allowed the Windows machine and the browsers to become overcome by malware. Every time I tried to navigate around, pop-ups would appear, pages would redirect. It annoyed me, so I installed and ran AVG, which found 36 'trojans…
Last reply by rastan, -
- 9 replies
- 194 views
I'm running into issues with my Logitech F310 controllers not playing nicely when running through Hyperspin or Rockerlauncher. 2 player doesn't work with second controller buttons seems to be mapped wrong. Lots of just strange things. However, when I load up my emulator (RetroArch) to play a NES/SNES/SEGA game the controls seem fine. I assume its a settings somewhere I'm missing, I've tried a few things like xpadder to try to resolve the issue. I'm entirely sure I headed the right direction at the moment. I was also having issues with the controllers be as responsive as I'd like, I'd sometimes have to press hard on the button to make it work when it was acting properl…
Last reply by DOYOUEVENFADC, -
- 12 replies
- 227 views
hi guys Im new here. followed Simply Austin tutorial on youtube. I am currently running hyperspin 1.4 I have been reading on the forums that the controllers should be working for hyperspin menu. I am having a problem with hyperspin where the xbox seems to be unresponsive in the wheel menu. as far as I know to get the xbox 360 controllers working is to enable it in hyperhq and make sure that it is enabled and device id is detected. I have also played around with the threshold values and they don't seem to be doing anything. please help me troubleshoot. I am not sure where to begin. The controller is working as I have Sega Genesis working and I …
Last reply by DOYOUEVENFADC, -
- 1 reply
- 107 views
Hi I have a question I think it's a glitch. I open hyper HQ select my wheel then go to the navigation/themes tab and check the box for roms only then when I open hyperspin and select that system it opens then closes back to hyperspins main menu. If I go back to hyper HQ and uncheck the roms only box it works fine. Is there any way around this glitch beside making a new xml database for the system? I'm using windows 10
Last reply by kylecp1979, -
- 1 reply
- 70 views
So im pretty New to setting up the front end here, but i have a problem, i recently got the new Steam Controller, but I dont know how to set it up properly, i did create a shortcut to hyperspin through steam, and attempted to configure the controller as an x-input device, but its not reading it correctly. Is there anyway i can get it to work?
Last reply by SIMPLYAUSTIN, -
- 0 replies
- 85 views
Jeez it seems like I'm on here every other day asking questions ! Anyway, The latest one is how do I get individual mame bezels running with their game. I downloaded a stack of them, and have them in the location \ROCKETLAUNCHER\Media\Bezels\MAME\ Ive enabled bezels in the mame ahk module, and set bezelmode to rocketlauncher bezels. When I run games it seems to be the default bezels in the MAME bezel folder. Anyone know where I am going wrong ? Gary
Last reply by jockinaus, -
- 0 replies
- 58 views
Jeez it seems like I'm on here every other day asking questions ! Anyway, The latest one is how do I get individual mame bezels running with their game. I downloaded a stack of them, and have them in the location \ROCKETLAUNCHER\Media\Bezels\MAME\ Ive enabled bezels in the mame ahk module, and set bezelmode to rocketlauncher bezels. When I run games it seems to be the default bezels in the MAME bezel folder. Anyone know where I am going wrong ? Gary
Last reply by jockinaus, -
- 4 replies
- 92 views
Hi, I've got HyperSpin up and running with a ton of systems and everything works great. The only problem I'm struggling with (at the moment) is that my PS2 wheel shows multiple copies of the two games I have in there. I have no idea why this is, having switched off clones in the xml database and switched HyperHQ settings to primary only. I presume I'm doing something stupid, any help?
Last reply by millski, -
- 0 replies
- 82 views
I am having the hardest time figuring out the easiest way to set up everything for hyperpause. I can't get any of it to show up. Not sure where I am messing it up but I supposedly have everthing set up the way that it should be, but with no results. I want to set it all up eventually and I have access to emumovies and hypersync as well. Please help!!!!!!!!!!!!!!!!!!!
Last reply by studaloble, -
- 1 follower
- 10 replies
- 234 views
Hi all. I have watched GigaGuides video of how to set up steam on my hyperspin and i have had no luck is there a simpler way to do this. As of now i have a PC Games wheel with all the steam games that allow me to just open the Exe. file but with Ultra Street Fighter 4 it wont open the exe without going through Steam plus i want a steam wheel as it looks cool. Any help is greatly appreciated.
Last reply by CapnJohno,
-
Popular Contributors
