Support
Having problems with HyperSpin? You've come to the right place!
4,038 topics in this forum
-
- 9 replies
- 287 views
I'm running into issues with my Logitech F310 controllers not playing nicely when running through Hyperspin or Rockerlauncher. 2 player doesn't work with second controller buttons seems to be mapped wrong. Lots of just strange things. However, when I load up my emulator (RetroArch) to play a NES/SNES/SEGA game the controls seem fine. I assume its a settings somewhere I'm missing, I've tried a few things like xpadder to try to resolve the issue. I'm entirely sure I headed the right direction at the moment. I was also having issues with the controllers be as responsive as I'd like, I'd sometimes have to press hard on the button to make it work when it was acting properl…
Last reply by DOYOUEVENFADC, -
- 12 replies
- 351 views
hi guys Im new here. followed Simply Austin tutorial on youtube. I am currently running hyperspin 1.4 I have been reading on the forums that the controllers should be working for hyperspin menu. I am having a problem with hyperspin where the xbox seems to be unresponsive in the wheel menu. as far as I know to get the xbox 360 controllers working is to enable it in hyperhq and make sure that it is enabled and device id is detected. I have also played around with the threshold values and they don't seem to be doing anything. please help me troubleshoot. I am not sure where to begin. The controller is working as I have Sega Genesis working and I …
Last reply by DOYOUEVENFADC, -
- 1 reply
- 225 views
Hi I have a question I think it's a glitch. I open hyper HQ select my wheel then go to the navigation/themes tab and check the box for roms only then when I open hyperspin and select that system it opens then closes back to hyperspins main menu. If I go back to hyper HQ and uncheck the roms only box it works fine. Is there any way around this glitch beside making a new xml database for the system? I'm using windows 10
Last reply by kylecp1979, -
- 1 reply
- 157 views
So im pretty New to setting up the front end here, but i have a problem, i recently got the new Steam Controller, but I dont know how to set it up properly, i did create a shortcut to hyperspin through steam, and attempted to configure the controller as an x-input device, but its not reading it correctly. Is there anyway i can get it to work?
Last reply by SIMPLYAUSTIN, -
- 0 replies
- 178 views
Jeez it seems like I'm on here every other day asking questions ! Anyway, The latest one is how do I get individual mame bezels running with their game. I downloaded a stack of them, and have them in the location \ROCKETLAUNCHER\Media\Bezels\MAME\ Ive enabled bezels in the mame ahk module, and set bezelmode to rocketlauncher bezels. When I run games it seems to be the default bezels in the MAME bezel folder. Anyone know where I am going wrong ? Gary
Last reply by jockinaus, -
- 0 replies
- 155 views
Jeez it seems like I'm on here every other day asking questions ! Anyway, The latest one is how do I get individual mame bezels running with their game. I downloaded a stack of them, and have them in the location \ROCKETLAUNCHER\Media\Bezels\MAME\ Ive enabled bezels in the mame ahk module, and set bezelmode to rocketlauncher bezels. When I run games it seems to be the default bezels in the MAME bezel folder. Anyone know where I am going wrong ? Gary
Last reply by jockinaus, -
- 4 replies
- 171 views
Hi, I've got HyperSpin up and running with a ton of systems and everything works great. The only problem I'm struggling with (at the moment) is that my PS2 wheel shows multiple copies of the two games I have in there. I have no idea why this is, having switched off clones in the xml database and switched HyperHQ settings to primary only. I presume I'm doing something stupid, any help?
Last reply by millski, -
- 0 replies
- 169 views
I am having the hardest time figuring out the easiest way to set up everything for hyperpause. I can't get any of it to show up. Not sure where I am messing it up but I supposedly have everthing set up the way that it should be, but with no results. I want to set it all up eventually and I have access to emumovies and hypersync as well. Please help!!!!!!!!!!!!!!!!!!!
Last reply by studaloble, -
- 1 follower
- 10 replies
- 315 views
Hi all. I have watched GigaGuides video of how to set up steam on my hyperspin and i have had no luck is there a simpler way to do this. As of now i have a PC Games wheel with all the steam games that allow me to just open the Exe. file but with Ultra Street Fighter 4 it wont open the exe without going through Steam plus i want a steam wheel as it looks cool. Any help is greatly appreciated.
Last reply by CapnJohno, -
- 0 replies
- 304 views
Hi Guys, I have a question about multiple controllers assigned to one profile or button combination. Let me begin with the beginning. I always had HyperSpin in my arcade controlled with my arcade sticks (p1 and p2) and that works great. Also Xpadder profile switching works great. But since a month I have added 2 extra controllers (wireless Xbox controllers) for the sake of playing the games on the TV. I added a HDMI out to my arcade and can play on the couch now if many friends are visiting. I gave the wireless Xbox controllers (p3 and P4) the same button configuration as P1 and P2, so it will work as a substitute to the arcade controls. But it doesn’t work as planned…
Last reply by SamVSsami, -
- 7 replies
- 201 views
I'm running the latest Hyperspin, and I noticed that it's very easy to "get ahead" of the backgrounds when switching quickly from game to game in a wheel. Roughly 20% of the time, the background doesn't load, as if the transition didn't have time to trigger, and the theme will show the previous game's background. Going back and forth fixes it, but it's annoying. Any suggestions? Also, is it possible to disable the Hyperspin logo transitions that are randomly inserted?
Last reply by damageinc86, -
- 1 follower
- 0 replies
- 167 views
Need help I am switching to an ipac mini. My set-up is 2 player 8 button each + track ball. I also have two xbox wireless gamepads. Having issues switching to make it all work. Would like the 2 controller with ipac to be player 1 and 2 for and xbox player 3 and 4. Trying to set it up for when I do not use the pedestal (ipac controllers) that you can also use xbox controller for player 1 and 2. (Hope that makes sense) Anyone willing to help me out. Teamviewer preferred but any help would be appreciated.
Last reply by JFlash3785, -
- 1 follower
- 2 replies
- 155 views
So I have spent the last few hours using gens rewind or gens 32 surreal to try to get a rom to work. On Rocket Launcher it read the game but when I tried to activate it would not activate the game as it was looking for the emulators cfg. The emulator itself works but hyperspin cannot launch it. What am I missing?
Last reply by SIMPLYAUSTIN, -
- 1 follower
- 7 replies
- 220 views
I keep getting this code 'ahk_CLASS EPSX' first thing after trying to launch a Playstation 1 one. I contacted Hyperspin after getting the 4tb drive, and they never really tried to help in the response except that I could put updated versions of the emulator in (which I already did). Any help or idea's? I mainly got HS for the psx one games. It say's I have the wrong module, but I've been trying. Thanks.
Last reply by mikeis300, -
- 2 replies
- 154 views
I got nes to do this, autoboots to old school game genie on load, I enter code then go to game. Is there a way to do this for other emulators how?
Last reply by demonseed, -
- 0 replies
- 249 views
I am having serious trouble trying to get this to work I can't find any info either. I have followed the notes but I still can't get it to work. I'm trying to use a 360 pad with my wii and wiiware games. Here are the notes from Rocketluncher Setting up custom Wiimote or GCPad profiles: ; First set UseCustomWiimoteProfiles or UseCustomGCpadProfiles to true in RocketLauncherUI for this module ; Launch Dolphin manually and goto Options->(Wiimote or Gamecube Pad) Settings and configure all your controls how you want your default setup to look like. This will be used for all games that you don't set a custom profile for. No need to save any profiles. ; All your contr…
Last reply by kylecp1979, -
- 1 reply
- 161 views
having trouble with my street fighter iv standard edition fight stick when using the hyperspin startup script. the menu just spins and spins when any button or joystick input is pressed. any ideas on what I can do? I know I can use other applications but I was just wondering what I could do in the script if possible. thanks.
Last reply by kylecp1979, -
- 2 replies
- 251 views
Hello all, I just upgraded to Windows 10 Pro 64bit. Today when working in HyperHQ the app is crashing. Whenever I try to add a ROM path and get the windows to locate the path and click on a drive the app crashes. Get window HyperHQ has stopped working.
Last reply by Indyplumber, -
- 2 replies
- 189 views
Hi guys Nearly there, this should be my last "help me" post for a while! Is there a way to set HyperSpin so that when it starts in "multi" it only shows the emulators that I have installed? Similar to how I can choose "filter by themes only" in HyperHQ. I only have four emulators and a handful of games and don't want to scroll through ones I don't have. Thanks in advance Skeeballer
Last reply by Skeeball_Fanatic, -
- 1 reply
- 162 views
Is it possible to change the controllers in singe i.e. Mad Dog McCree ? I'm using a dolphinbar (set to mode2) & wiimote gun and would like to Swap A and B for reload & trigger
Last reply by pacooka, -
I keep getting this code 'ahk_CLASS EPSX' first thing after trying to launch a Playstation 1 one. I contacted Hyperspin after getting the 4tb drive, and they never really tried to help in the response except that I could put updated versions of the emulator in (which I already did). Any help or idea's? I mainly got HS for the psx one games. It say's I have the wrong module, but I've been trying. Thanks.
Last reply by death2u99, -
- 2 replies
- 186 views
I have been messing with and trying to learn fades, and on Nintendo, the game name and year and all that pops up and displays but on Super Nintendo the info bar is blank. I am just using global settings so both should work so I can only assume whatever XML files hold that data must be blank. I found the data folder in RocketLauncher and I see ini files there full of info for both NES and SNES so that can't be where it pulls from.. At my wits end here, is probably something obvious? Edit: Well, it turns out none of them work. They work launching games from RLUI but not from Hyperspin...I see the fade screens just no information when in HS....wtheck?
Last reply by NewYears1978, -
- 0 replies
- 156 views
This might be an easy fix but what happens is this: I am in HyperSpin and I click start on a game, and before the emu loads up the screen goes black for a split second, then shows HS again, then goes into the emulator. Upon exiting the emulator the same thing happens. I thought Fades would solve so I added in and out fades and now this happens (same thing): I click start on game, Fade loads, then HS shows for a split second before emu shows. Quitting emu, I see HS menu for a split second before fade shows then HS shows again. Any way to smooth this out? I have seen videos (Simply Austins for instance) without this issue. I thought it was xpadder profile…
Last reply by NewYears1978, -
- 4 replies
- 169 views
Hi very new to Hyperspin, but couldnt find an answer with search. Sorry if its been asked before I added the magnavox Odyssey2 system to hyperspin. Hypersync downloaded and installed the themes, wheel, game vids etc, but there is no system preview vid appearing in the main menu. Any suggestions
Last reply by OMGHyperspin, -
- 9 replies
- 251 views
Anyone know where I can get a wheelpack for the Colecovision console?
Last reply by iNTiGOD,
-
Popular Contributors
