Support
Having problems with HyperSpin? You've come to the right place!
4,031 topics in this forum
-
- 0 replies
- 79 views
Sorry if I am repeating a question already asked, but has anyone built their own USB Controller from an arduino MIcro? only reason I ask is, I've recently finished my cabinet and I'mm set up with an original xbox, but, I want to put my hyperspin machine in the cab instead, i already have the controllers etc wired on the micro for the original xbox but they aren't recognised in windows. any ideas or can someone point me in the right direction, google has yielded a few dead ends so far
Last reply by andsolo21, -
- 3 replies
- 111 views
Hi, I have HyperSearch set up as a wheel and I'm able to search for games fine, but when I try to run one from the search, I get a Rom not found, no valid rom extensions error message. What am I doing wrong? Thanks, --J
Last reply by jevansoh, -
- 0 replies
- 75 views
I've downloaded pretty much all the Mame themes I can find but for whatever reason, about half of them just simply don't load. Others load fine. I have animate out/reload both checked in HyperHQ and I'm sure the themes are "good" and placed properly. It's just that a lot of them don't load when I'm on the wheel. I've tried a few different Mame databases, too. I don't know where else to look?? Thanks, --J
Last reply by jevansoh, -
- 0 replies
- 77 views
I have a dozen+ systems in my HS setup, but 90% of the time, launching a MAME game results in the game launching but the frontend sounds can be heard running in the background, with the other 10% loading normally and HS losing focus like it should. None of the other systems exhibit this problem, only MAME. At first I thought that it was an issue with bezels (my MAME games are the only ones with bezels) slowing down loading time and breaking RocketLauncher/HS's obscure magicks, so I moved bezels out of their folder and tried again but the problem persisted. I've tried different MAME versions and launching without themes/bezels with no luck. The maddening part is it's just …
Last reply by endresults, -
- 0 replies
- 53 views
Bonjour à tous, je suis nouveau sur le forum et dans le monde de Hyperspin. Voilà je créer se topic en espérant que quelqu'un d'entre vous puisse m'aider, je suis actuellement en train de me créer une borne arcade qui n'est pas loin d'être fini et arriver à la phase de l'emulateur j'ai découvert Hyperspin que je trouve magnifique par rapport à d'autres. Voilà j'ai suivi un tuto par mis plein d'autres et une fois Hyperspin installer niquel tout fonctionne (installer sans jeux) mais je remarque qui j'ai des gros lague dans la navigation entre les différentes console ect... Alors que dans pas mal de vidéos sa tourne super bien et ces super fluide. Je me suis …
Last reply by Dragor64, -
- 2 replies
- 76 views
So I have hyperspin 1.4 and I have it going now, and it all works on mame (only one I've set up, at least in part).... Except when I spin the wheel backwards (only backwards) through the alphabet of games and hit "vs raid on bungeling bay". When it hits that game it stops, gets stuck on it, n I either have to play it, or back out of mame. Now when I go back in- black screen n stuck there. Stays that way til I close the program through the tray. And also stays that way when I go into mame unless I do the following- rename the mame media folder to hide it from hyperspin, it allowes me into mame again, n I can scroll, albeit no art. So with that I'm assuming I hav…
Last reply by hollywood6964, -
- 0 replies
- 68 views
Hey Everyone! Having an issue using my trackball in HS. I've created the ini file in my MAME folder and changed the mouse, lightgun, multimouse settings to 1. I linked this ini in RocketLauncher, everything seems fine. It's not until I enable the trackball in HS that the joysticks become unresponsive and I can't even properly exit HS. Any suggestions here? P.S. Also having issues getting Don's tools to identify my roms and say "yes" on the game list. Bonus points to whoever can figure this issue out too. Thanks!
Last reply by fightnightfz, -
- 8 replies
- 118 views
Hey everyone. I just finished building my arcade and it looks sweet. For the life of me I can't get and controllers working. Someone please help I have 2-Player Ipac sanwa joysticks seimitsu button windows 10 pc hyperspin setup with rocket launcher mame roms and emulator snes roms and emulator hypersync all synched up with emumovies and hypersonic account. mame and sees art and everything loaded. when I start HyperSync everything looks great... I can move up and down to go through emulators and games but I can't start a game. None of the buttons work for player 1 start or player 2 start. I just want to go throu…
Last reply by Spawk, -
- 1 follower
- 1 reply
- 80 views
Hey, I am very new to the Hyperspin community, I have recently acquired Hyperspin, and have gotten it working with the exception of the controllers. I have xpadder(Have no clue how to use it) and trying to map the controllers to use hyperspin, as well as for each emulator. Can anyone assist or walk me through the process. Xpadder asks to set up a profile, you can even load them but I don't know how and then how to get that to correlate to hyperspin. Any assistance would be great, thank you :-)
Last reply by gigapig, -
- 1 follower
- 8 replies
- 79 views
I'm having a major problem with HyperSpin. First, sometimes Mame games won't exit. I can go into a game from HS and exit and sometimes it will work and sometimes it won't. Also, now once I start HyperSpin it will "HyperSpin" the games down, scrolling down down down even without any input from any of the joysticks or gamepads or keyboard. I can press "up" on a gamepad/joystick/keyboard and it will register and allow me to go up, but as soon as I let off the up button, it starts scrolling down uncontrollably again. This is without any delay and I'm not talking about the normal scrolling that happens if you don't press a button for a while, although it does scro…
Last reply by jevansoh, -
- 0 replies
- 76 views
On my arcade cabinet, I don’t have enough buttons for exiting games so I have a button combination set. When I press 1 and X at the same time, my mame game exits and I’m returned to the Hyperspin wheel, just as I expected. Strangely, though, when I press 1 and 2 at the same time, I’m also kicked from the game and sent back to the Hyperspin wheel. Where could this setting be coming from? It’s really annoying because 1 and 2 are my player 1 and 2 start buttons so it’s really easy to hit them both at the same time in-game. It’s worth noting that if I open mame directly from Windows, it works as expected I only have the problem when using HyperLauncher…
Last reply by TheIronCheek, -
- 1 follower
- 5 replies
- 87 views
Hello All, I need your urgent support on the below error while trying to start any game in the Hyperspin I tried all my best to fix this issue but no luck. appreciate your urgent support to fix this issue. thanks in advance.
Last reply by Spawk, -
- 3 replies
- 101 views
I was working on my setup last night. Making changes, adding systems and other misc configuration work. When I exited RocketLauncher and went back in I am now only showing 58 out of the 95 systems that I originally had as emulated systems. My question is what happened? Did I delete a file? Is my database corrupt? I don't recall actually deleting any files but I did make some emulator changes in HyperHQ, for a lot of my setup I had to change the path to where the emulators point too. They were listed wrong in HyperHQ. The other thing I have noticed besides having half of my emulated systems being deleted is my hyperspin wheel is set to a background called …
Last reply by darkshaed, -
- 1 follower
- 2 replies
- 61 views
When using HyperHQ, is there a way to switch controls around for the 'horizontal' wheel setting? When the wheel is horizontal, I feel like I need to press left or right to cycle through the wheel but it's still up and down. Is there any way to change this?
Last reply by Bungles, -
- 1 follower
- 3 replies
- 94 views
I have a problem I hope someone can help me with. When I press enter to launch a game, nothing happens for about 10 seconds. It doesn't matter which system I'm on or which emulator it's using. After about 10 seconds, finally, the fade in screen will come up and it will start launching the game. I want it to do "something" immediately after I press enter, though, because other people using my cabinet think it's broken and I see them press the enter key over and over and over again, thinking something is hung up or not working, when all they have to do is wait 10 seconds. I just think 10 seconds is way too long to have to wait before something starts happe…
Last reply by jevansoh, -
- 1 follower
- 5 replies
- 92 views
Hi there, I just started putting together my first MAME setup about two weeks ago. I've followed videos and forums on setting everything up. I currently have MAME .161 as the only emulator, Rocket Launcher 1.4 upgraded from 1.3 as the engine, and Hyperspin as the front end. I am waiting on shipping of an external hard drive before downloading a full rom set(not enough space on internal, so just to get things set up I downloaded 3 individual games. All games boot 100% from rocket launcher. The games also show up properly on Hyperspin when I configure to show only available games. But when I go to start them in hyperspin I get this error code: C…
Last reply by bcameron, -
- 3 replies
- 82 views
Running HS 1.4.16 mame64 0.193b rocketlauncher 1.2 win 7 64bit pro I have bezels and pause enabled When I first load hyperspin a cli window pops up and dissapears just before the intro video plays..... then when i select and launch a rom another cli window pops up and dissapears... I have all settings in rocketlaucher set to hide emulator, frontend, desktop etc etc...but still getting these cli boxes... How can I make them not display or actually hide them as the rocket launcher settings dont seem to affect it.. Cheers for any help problem solving this
Last reply by Spawk, -
- 0 replies
- 56 views
Hi, i hope someone can help, ive been following this tutorial to link hyperspin with rocketlauncher https://gameroomsolutions.com/setup-hyperspin-mame-hyperlaunch-full-guide/ , ive managed to get to the end and when i launch hyperspin it shows my list of mame games in my game folder but when i press enter they don't seem to load, they do load fine in rocketlauncher ui when i launch each game, this is the log i got just now. If anyone can help that would be great, i'm new to this but keen to learn. Thanks (Hyperspin is 1.3.3 and Rocketlauncher V1.0) 06:48:44 PM | HyperSpin Started 06:48:44 PM | Going FullScreen 06:48:44 PM | Checking for updates 06:48:44…
Last reply by Segadanny, -
- 2 replies
- 82 views
I was wondering if anyone could help me with my system? I have 2 problems I am trying to solve. 1. How do I keep the led Blinky lights on in MAME when playing the game? I have already ticked the light game control in the configure menu. 2. Where can I find and edit the text for Hyperspeech?
Last reply by Bobzombie, -
- 4 replies
- 111 views
Can someone please help me? I am new to the community and cannot find any current information on how to set my backgrounds up for my arcade system. It seems as i have tried to do what is suggested for set up, but all of the posts i have read are 2-3 years old. I have 5 versions of Mame on my computer, and im not sure which 1 to use for my backgrounds on Space Invaders and Asteroids Deluxe. Do i put the zip files I downloaded from Mr Do's arcade in Mame, Rocketlauncher, artwork, bezels or Backgrounds? Im totally confused, can anyone please help me! Thanks!
Last reply by Bobzombie, -
- 0 replies
- 71 views
I am fairly new to Hyperspin and currently rebuilding my 3 year old arcade System. I am familiar with many aspects of the program itself but recently noticed a quirk in the behavior. As I was setting up the new system I often had to quit the game by using unconventional methods (Ctl/Alt/Del, task manager, etc). After I do that I noticed that when I restart Hyperspin it jumps right into the sub wheel that I was in when I quit the program. For example, if I was under "Arcade Console" Hyperspin would start with the arcade console menu. My question is: Is there a way to force Hypersin to ALWAYS start at the top level menu/wheel? Thank you!!
Last reply by cold_fire, -
- 1 follower
- 2 replies
- 89 views
I wanted to see what other users are using to control Hyperspin and play there emulators. I currently have extra Xbox1 controllers , but not finding much info on people using these controls. Everything is directed towards 360 controllers.
Last reply by shitoken, -
- 2 replies
- 85 views
probably a topic thats been covered multiple times but i just cant find the answer... im trying to launch my Wii U games. i was getting errors in RL so i am now trying to launch them without RL. when i select a game it appears nothing happens, but ive figured out that Cemu does launch if i look in the details section of Task manager. the program does not show up on my computer though. Cemu works fine if i double click the EXE. does anyone know why this would happen? is it just my PC or is it hyperspin? the log seems fine. but ill add it anyway. HS launch.txt
Last reply by Peliculon, -
- 1 follower
- 2 replies
- 102 views
Hello, The only download I can find for Nintendo DS Roms has them all numbered and they don't match the database. The Nintendo DS.xml file I have, has CRC info, but when I use Don's Tools to try and rename, it doesn't find a single match, not even for one file. I tried the fuzzy scan and that doesn't come up with any results, either. I can't find a good NDS rom set to download that is HyperSpin ready, so I don't really have a choice but to download what I'm downloading, but if I can't get them renamed, I've wasted a ton of bandwidth and time. It will take me days to download this set and I'm only about 10% complete but wanted to try to rename the file…
Last reply by jevansoh, -
- 11 replies
- 124 views
hi guys, I have a problem with the epsxe emulator. When I start the emulator, the display automatically turns on if desired. if I choose hyperspin the emulator and then the game remains off analog and I can not activate it with f5. epsxe shows it to the analogue on but this does not. an example of gran turismo 2 started on hyperspin can not be steered neither Dpad or joypad.
Last reply by zebi,
