Support
Having problems with HyperSpin? You've come to the right place!
4,041 topics in this forum
-
- 1 follower
- 2 replies
- 221 views
I updated to vet 1.51 to get hyperspin working again after the windows update. However, I noticed that when exiting Nestopia, it hangs up for a few seconds before finally exiting and returning to hyperspin. It launches fine and seems normal, but upon exit, the amount of time needed compared to all other systems is too long. this may be a rocket launcher issue with the windows update but I wanted to see if anyone else had the same issue and may have a workaround. Any help is appreciated. Thanks!
Last reply by beavis, -
- 1 follower
- 2 replies
- 335 views
Hi, I downloaded this HS bundle pack from ArcadePunks. **link deleted by admin** but I have a problem. HS wouldn't launch when I run it. I followed the instructions that came with it (see inserted media), but it won't work. Can anybody help me to install this software, would be nice to have my own arcade machine at home. Hope there is a way to install this quick, cause I don't want to install everey emulator sepperatly. Thx anyway Thompson
Last reply by thatman84, -
- 0 replies
- 195 views
Hello, I would like to create for each game a seperate folder and launch the games from a bat file. I know this works already emulator_multicpu.exe zip romname But i can not exit the emulator. When i push esc . Then the window gets little no exit the emulator. Can somebody help here. What must i add in the bat file? Hope somebody can help. Thx
Last reply by defre1976, -
- 1 follower
- 1 reply
- 230 views
I think this was asked a ways back, but I can't remember... might be a short answer, anyway. I was wondering if there's a way to have HS start inside of a wheel (MAME, for example) instead of at the main wheel.
Last reply by Creezz67, -
- 1 follower
- 3 replies
- 215 views
I have a strange problem with Demul (atomiswave and Naomi) on hyperspin When lunching Demul last version (outside hyperspin) my controller (pad) work fine every time i open games, but when i open hyperspin, i lost all the control config settings i have to reconfig them each time i open hyperspin (all emulators work s fine and modul 0.7 is all default) Why demul lost his control config each time i enter hyperspin, i tested it outside hyperspin, and the configs are saved Is it a rocket luncher problem ? This issue happened to someone befor me ?
Last reply by hassen, -
- 1 reply
- 211 views
Well weird weird my buddys cab allnof a sudden Hyperspin will not launch games. menu scrolling works fine , can progress and regress through systems just fine, but when t comes time to select the game, Hyperspin does nothing I don’t even get a error on the screen, just stays on the game screen. any ideas where to start? I checked HQ and my navigation buttons are correct.
Last reply by thenoob, -
- 1 follower
- 8 replies
- 241 views
I have bset up my emulators in there own folders and roms in there own folders aswell i have audited the roms in rocket luncher and they can laurnch from RL the roms have the same name as the database and launch without rom only mode i have set up the rom path in Hyper HQ and the extentions correctly with comers , Why can't i get into the wheel wwith rom only mode on
Last reply by hassen, -
- 6 replies
- 238 views
i did follow this instrucions but it won't show up on hyperspin and i have setupped on hq log.txt
Last reply by WouterSmits, -
- 3 replies
- 270 views
i have an error when trying to lunch sega model 2 roms in rocket luncher, here some pic !!
Last reply by hassen, -
- 1 follower
- 3 replies
- 290 views
My family and I really enjoy using Hyperspin Frontend for a few years now. Overtime I have been able to address many of my issues through this forum and internet searches. However, one last issue remain elusive and still had not been addressed by the latest version 1.5.1. I found many threads on this forum make mention of the possible issue causing Hyperspin to eventually freeze forcing us to close and reopen after several hours of use whether idling or coming out of a game back to Hyperspin. This interrupts our family and friend's fun streak when gaming on the machine using Hyperspin for long periods of time. I believe many on here are aware it is most likely due to the …
Last reply by dark13, -
- 0 replies
- 175 views
Not sure if this is posted in correct place but wondering if anyone on here uses the aimtracks as I’ve got a query if anyone can help? I’ve got two setup, everything's fine with them, but I did notice something I’ve never seen before. While both guns were in the holsters (pointing down away from the screen) my 5 yr old pressed the trigger on the player 1 gun. This then brought up the windows bar at the bottom of the screen (while hyperspin was running) I’ve never noticed this before, and I’m assuming it’s due to the offscreen reload when the trigger is pressed away from the screen. Just wondering if anyone has any idea how you stop this happeni…
Last reply by Martin0037, -
- 1 follower
- 7 replies
- 208 views
Seeking some help. Done hyperspin and rocket launcher for years but very little in the last year. Turned on my computer/arcade yesterday and played games. Today it updated windows and my hyperspin would not work. downloaded the latest update files for hyperspin from the site. Hyperspin starts but when game selected it says the ol’ ‘’Default emulator not found”. I remember this from years ago and fixing it somehow and I think it was something simple. Any thoughts? Thanks as always all.
Last reply by relpek, -
- 4 replies
- 221 views
I goto launch atari 2600, 7800, Lynx, NES, SNES, Sega M/S Genesis, 32X, Sega CD… I click on the game wheel and I click on the game to load. I have a fade screen set up and I watch the load bar move left to right then My screen goes back to the games system wheel and I am frozen for 40 seconds and THEN the game loads. I am using Hyperspin as my front end with the assistance of Rocket Launcher I am using RetroArch for these systems… Any suggestions why I have to pause 40seconds? It doesnt do this on Daphne, MESS or Mame. Is it possible that Retroarch is in some way delaying the game from booting up? Or do you think the problem is in RocketLauncher or Hyp…
Last reply by propdept, -
- 3 followers
- 4 replies
- 239 views
I have watched the videos. and read the threads. I am making progress, but still have some issues. Okay I have rocketlauncher loaded, and linked to Hyperspin. All my paths a correct linking my emulators, and roms... But still does not work. When Hyperspin loads the wheels it show games I do not have, and does not show games I do have. In rocketlauncher I use this syntax (PSX for instance is) cue|bin|7x What is happening is the games I can access, I am getting a message the roms are not found with provided extensions.. The paths are correct I so want to get this program to work for me. HELP !!!!!
Last reply by ninja2bceen, -
- 0 replies
- 146 views
Hola a todos, tengo un problema y quería ver si me podían ayudar, hoy instale el retros 2.0.3 en un pc viejo, luego hice la del flojo y descargue un hyperspin ya configurado con juegos y todo, después de instalar los drivers puse el programa en el disco C, pero al abrirlo solo me sale abajo en la barra el hyperspin como que abrió pero en realidad no pasa nada. algún programa lo bloquea? De antemano gracias PD: utilice el hyperspin ya configurado y funciono en otro pc
Last reply by LoKoDaNi1992, -
- 1 follower
- 2 replies
- 379 views
I've spent a number of hours with Hyperspin and Rocketlauncher, and think I mostly have a handle on it, I have two emulators set up for two systems, and they launch fine from RocketLauncher.exe. But when I try to access my games through Hyperspin, every time I try to launch a game (MAME or SNES), I get an error with "Modules\Module Extensions\Gdip.ahk", Autohotkey.dll can't read it. I examined the Gdip.ahk file, which I assume is autogenerated (It wasn't in the original download), and it actually contains html, I've attached a picture of the web page it brings up. So it seems like there was an error when it tried to generate the file, and it got filled with html. …
Last reply by no1453, -
- 2 followers
- 2 replies
- 231 views
Does all of your emulators and ROMS need to be inside the Hyperspin Directory. I have installed my Hyperspin on drive "C", but all my emulators, and roms are located on my "H" Drive. If so I need to get a larger harddrive. If not is there a way to link them between drives? I have used the option to tell Hyperspin where to find my ROMS, and Emulators, but it does not seem to locating them.
Last reply by dark13, -
- 1 reply
- 219 views
Pardon the ignorance of a newbie here but I have a couple of questions that I am sure the more advanced users can help me with: 1. How do I add ALL the games in my ROM files to the program. Using the Emulator tab in Hyper HQ for my Mame. I linked Hyperspin to my MAME ROM folder. It shows games I do not have, and does not show games I do. I need to sync the wheel menu with the ROM folder so it will accurately depict the games I have. 2. Is there a step by step tutorial on how to add systems that is dummy proof. I have tried to add a PS2 to the wheel, and though the option for the PS2 shows up, when I click on it I get an error message. I think the issue is about…
Last reply by ninja2bceen, -
- 0 replies
- 158 views
Hey! So I finally got my cabinet up and running this weekend and been enjoying it a lot. I am very much a noob on all this and have been using guides to get it all set up. Everything seems to be running great except for one thing that has happened once so far. So me and my brother had been playing a couple games in a row, I would say we had been at it for about 3 hours. We were playing that Sailor Moon Beat em up when we started to notice what seemed like random controller inputs. As we progressed it happened more and more often and with longer randomness before we got the control back of the character. We kept going since it was so close to the end and we thou…
Last reply by dpunktw, -
- 2 followers
- 3 replies
- 242 views
I finally have a crt connected by crtemudriver on windows xp. Sadly on XP I can't run the current version of hyperspin. I'm not completely sure, but I believe Hyperspin used to work on xp. Does anyone know the last version that worked on XP? I think it should be the last version that used hyperlaunch instead of rocketlauncher... Where can I download older versions?
Last reply by ninja2bceen, -
- 3 followers
- 5 replies
- 243 views
hi guys, is it possible to have the wheel always be the top layer? some of the themes are really busy and when idle, the wheel all but disappears. thanks
Last reply by dark13, -
- 1 reply
- 218 views
Hi, Perhaps it's me, and perhaps you always know it, but it seems there is a strange thing appearing with the xml files relative to the database system. At the beginning i would to use the rom name system of TOSEC, without have to rename the artwork, video of Hyperspin. In the Xml File: <game name="Sonic the Hedgehog (USA, Euope)" index="true" image=""> <description>Sonic The Hedgehog (USA, Eu)</description> <cloneof></cloneof> <crc></crc> <manufacturer></manufacturer> <year></year> <genre></genre> <rating></rating> <enabled>Yes</enabled> </game&g…
Last reply by Spawk, -
- 1 follower
- 2 replies
- 257 views
first time user of hyperspin and just downloaded 1.5.1 full version from here,ive been following simply austins guide setting up ,but that's based on version 1.4 and all as gone well apart from getting hyperspin to display fullscreen,It seems in the 1.5.1 download there is no hyperHQ file to alter the settings,its all setup with rocketlaunch but no fullscreen,am I missing something simple?
Last reply by urbangangsta101, -
- 1 follower
- 2 replies
- 276 views
Hi, I've been away from Hyperspin for a while but slowly getting back into building a new setup with complete ROM sets. I'm using the Hyperlist XML's with ClrMAMEPro to rebuild my cartridge based systems but I'm struggling to verify some of the ROMs. Can I just confirm that the included CRC32 values are incorrect for some of the XML's or am I just not looking for the ROMs hard enough? The XML's I'm having issues with are Genesis, SMS, GameBoy, NES, Famicom, Famicom Disk System, SNES and Super Famicom.. each set has several missing ROMs that have CRC32 values that don't seem to match up to anything found online? For example - the English Translation ROM for 'Rent…
Last reply by urbangangsta101, -
- 2 followers
- 9 replies
- 380 views
Hi, i’m looking for the past 2 weeks a solutions on the hyperspin forum but don’t find anything that helps. The problem is if i startup Hyperspin the arcade buttons don’t respond. It only responds when i first click a button on the keyboard.When i get to the second wheel. The problem repeats itself. So back again, click on keyboard then the arcade joystick responds. I don’t know what the problem is. I did everything what was said on the tutorial . Can anyone help me please ? I know that its the 10000000 time that someone ask for help with the controls. But i’m really hopeless now. I can’t figure it out. Help is welcome. Kevin
Last reply by Kevinv10,
