Support
Having problems with HyperSpin? You've come to the right place!
4,032 topics in this forum
-
- 1 reply
- 87 views
Ok, got something weird going on. I have one single wheel logo that doesn't show up all the time. For some reason, my X68000 wheel logo never shows up on when Hyperspin first launches. All my other system logos show up fine but this one. However, if I click on it to go to my x68000 games wheel and then back out it shows up. It's the same logo from the artwork download here. It's in my main menu media folder just like all the others. I just can't figure out why it doesn't show up like all the other wheel art. Any ideas?
Last reply by RyuHayabusa78, -
- 0 replies
- 112 views
Hi all Has anyone sorted out HS to except more than 99 video modes? If I use videomode maker and then do say 140 video modes. The go to Mame.exe and run Rtype it runs sweet, but HS doesn't load. If I use videomode maker and then do 99 video modes HS loads fine but Rtype is not running at 15khz and runs 640x480. It's like the 41 modes I cut back on, one of them is the mode Rtype requires to play 15khz Anyone please got a way of fixing this.
Last reply by Beaps, -
- 2 followers
- 10 replies
- 164 views
Guys, I don't know if I am rusty and cannot find the option, or it simply cannot be done. I had a small creative spark yesterday and wanted to try some ideas for a theme, tricking the artworks and special arts. Basic rough sketch: The problem comes with the search by letter function. I want to make the search to show like this: So, I modified the pgs in the Letters folder, each image instead of containing its corresponding letter, contains the whole alphabet, and the letter in question highlighted. The problem is that the letter image is placed in the middle of the screen, taking the X axis 0 of the image: Can the le…
Last reply by Bungles, -
- 2 followers
- 10 replies
- 116 views
Hello all! I've got an issue with hyperspin not listing all the games that I have setup. I have 700 or so NES roms in the proper folder and named correctly. However when I run hyperspin I only see from the games 10 yard fight until chip and Dale rescue rangers 2 in the wheel. I checked my nes database xml and it has all the games listed. Any ideas as to what could be preventing all the other games to be listed? I did add in another game that wasn't listed (holy diver (J)) but I added it into the database xml.
Last reply by 000, -
- 1 follower
- 3 replies
- 96 views
The Title message suggests that I need to obtain some files and put them somewhere. Could someone advise me on what files I need and what the appropriate path to them would be? I already have a number of Themes, but I don't think this message is meant for them. Thanks!
Last reply by Bungles, -
- 1 follower
- 2 replies
- 103 views
Hi, I seem to be having issues with Hyperspin loading, for some reason when I start Hyperspin, it sits in the taskbar and will not load. It was working but not its not. Anyone have any suggestions? Currently running Windows 10, Using Hyperspin 1.4
Last reply by Bigmig, -
- 1 follower
- 2 replies
- 115 views
Hi guys I am using xpadder and editing the keyboard keys to work with various games, Mame, dreamcast, PC games etc This works well when given the option to customize the keys in the PC game itself, however there are some games that I need to create a whole new profilem however when I launch the game exe I cant find a way to auto load a new profile for that specific game Is there a gamepad tool like joytokey/xpadder where I can create different profiles for different games and when booting the exe of the pc game via hyperspin- it switches to the profile created? Thanks guys
Last reply by sidlalami, -
Struggling Newbie - FATAL ERROR 'No imaging component suitable to complete this opera
by simonrolley- 6 replies
- 394 views
Hi, Im PC Savvie and I understand windows xp , folder structures etc. Ive followed the following guide for setting u Hyperspin https://www.youtube.com/watch?v=WDEaS-cKleI. Great tutorial, worked great. Th ePC I have is really basic, windows XP Home edition, service pack 3, net2 and 4 installed, pentium 4 3.2, 1 GB ram etc. I bought an arcade cabinet and i have a combat king dual controller ready to integrate into the cabinet. My main emulators will be MAME and Daphne. I have all the rooms and laserdiscs and they work just fine standalone, its an old version of MAME 32, 0,98.00. Ive stuck with this as all the ROMS I have work with it. Daphne isn't working and I have…
Last reply by Eksdad, -
- 2 followers
- 2 replies
- 107 views
Hi, I have a folder with 270 games, without writing them by the hand there is a program that creates a file .xml of these games that I have in the folder? Thanks
Last reply by thatman84, -
- 2 replies
- 87 views
The title says it all. When I install HyperSpin, does it put entries in the registry? If not, can I just copy the HyperSpin folder and contents to another drive?
Last reply by cbond, -
- 0 replies
- 94 views
This has likely been answered already, but I'm apparently not using the right words in the forum search box. I am making rom revision collections in MAME, and I want the description to show the full information without hiding text. I have Remove Textfield Info unchecked, yet it still only shows the game title. From MAME.ini: [Game Text] game_text_active = true show_year = true show_manf = true show_description = true [filters] parents_only=false themes_only=false wheels_only=true roms_only=true [themes] use_parent_vids=true use_parent_themes=false animate_out_default = false reload_backgrounds=false From MAME.xml <descr…
Last reply by ThaDoctor, -
- 2 replies
- 149 views
Does anyone know of a tut to get American Laser Games working in HS using Daphne Singe?
Last reply by wallmachine, -
- 1 follower
- 1 reply
- 87 views
I'm going to need someone that is going to be willing to be extremely patient with me here because I am brand new to all of this. I have read through a lot of posts and get lost in a lot of what people are saying. I wanted to build a system so I could learn how to do all of this but I work a lot and whenever I started I just got overwhelmed. I ended up finding someone that was selling a setup exactly like the one I wanted to build. After getting it home and playing it I was sure I had made the right decision. I loved it. The problem came about a week later. I know this is a no-no but I didn't know what else to do. I loaded up my Hyperspin and then went…
Last reply by Bungles, -
- 1 follower
- 2 replies
- 89 views
hello to all, when I launch HyperSpin.exe, immediately start the screen with wheel where you select the emulator, I do not start the intro screen of hyperspin, you know how can I restore it?
Last reply by MetroCity, -
- 1 follower
- 1 reply
- 143 views
Hello everyone quick question. Is there a website that one can look and get a game by game HLSL settings recommendation?
Last reply by dragon57, -
- 2 followers
- 10 replies
- 210 views
Hello , Could somebody help how to bypass this launcher . I tried myself some things but can't seem to find it . I found some info , but i don't have this original steam_api.dll in that folder ? I could make a shortcut , and in Application target i could set a parameter line . But yes , what must i put there ? ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- ; steam_api.dll replacement. ; ; Allow you to start game directly without the launcher. ; ; To start the game without the launcher, rename original ; steam_api.dll to ValveApi.dll and then rename ; SmartSteamEmu.dll to steam_api.dll ;-=-=-=-=-=-=-…
Last reply by defre1976, -
- 4 replies
- 120 views
I know this is really basic but I'm brand new to this and it's a frustrating simple problem. I have set up HyperSpin and Rocket Launcher, and have so far got Mame set up to work. I can start the games through RlauncherUI to test connection, but I can't get any of them to start in HyperSpin. I'm using a keyboard right now til I know I have it functional and have the keys I want set in HQ. If someone could give me some advice or guidance on this I would appreciate it
Last reply by Zink360, -
- 1 follower
- 2 replies
- 117 views
Hello guys, i'm looking for a ScummVM System Menu with no luck, it's not present by default after installing Hyperspin. Could someone help me? Thanks in advance!
Last reply by Shad8, -
- 1 follower
- 3 replies
- 111 views
Hey All, Been away from the scene for a while. Working on completing my systems. I am now on C64. For roms, I have Gamebase v15, Tosec and No Intro. For some reason, I am unable to match my roms from any set to the current XML which I think is based on GB v15. Only ~1000 match out of 8000. I am referring to the latest wahoobrians XML (http://hyperspin-fe.com/files/file/12546-commodore-64-official-database/) Am I missing anything? Can anyone point me to the correct XML or some advice on how I can match 8000 roms? Thanks in advance!
Last reply by joncrytom, -
- 0 replies
- 86 views
I can't get mame 0.192 to pick up my ctrlr folder for my custom controls. I had this working in 0.172 just fine Is there something different I have to do? I have the path set to ctrlr in my ini file and my ini path to ini and all my ini files are in the ini folder and all my ctrlr files are in the ctrlr folder. Any help would be appreciated Thanks!!!
Last reply by kylecp1979, -
- 1 follower
- 2 replies
- 87 views
I built a 4 player mame cabinet awhile back with an old Ipac4 i bought years ago but never really finished it. Finally getting it set up! I installed hyperspin 1.33 and rocketlauncher 1.2.0.0 using the hyperspin youtube video. I'm pretty new to all of this. I have RetroArch 1.7.0 installed to run my MAME games through hyperspin and rocketlauncher. On certain games, Street Fighter II champion edition USA 920313 for example, I try and start a game, it loads the game, but then the hyperspin GUI pops up on top of the loaded rom. How do I make it so it doesn't do this? Kind of annoying when i have the Mouse tucked away under the mame control panel and i have …
Last reply by Halo2jak, -
- 3 replies
- 105 views
Hi I'm running Hyperspin on Windows 7 in conjunction with Rocketlauncher, everything works fine, BUT the very first ROM I attempt to execute (regardless of the system - MAME or others) always takes a very loooooong time to load - sometimes 20 seconds or longer. I hit the start button -- and Hyperspin just sits idle for a lengthy period -- and then all of a sudden, Rocketlauncher takes over (as expected) and boots the ROM. The funny thing is -- this only happens the very first time I launch a ROM. After I launch the first ROM, exit back to HS, and launch other ROMs, everything works as expected (i.e., no delays whatsoever). Granted, this is a minor annoyance, but…
Last reply by blaaze3, -
- 1 follower
- 1 reply
- 99 views
Hi, I am new to Hyperspin but learning a little every day. I bought a used upright system that was already setup, loaded and ready to enjoy but I noticed some emulators were missing when scrolling through the Hyperspin list. I figured they were just never loaded so I exited Hyperspin and went into Windows and looked in the D drive were the emulators are kept. I noticed Applewin and Atari 800 emulator folders were there with the rest but those 2 don't show up in the Hyperspin list. I think there may be a few others that show up in the D drive folder but don't show up in the Hyperspin list... what am I missing? Why are they not loading in Hyperspin? Thanks
Last reply by Bungles, -
- 0 replies
- 83 views
I need a MAME.xml file that contains information on buttons, players, controller type, etc. I can't seem to find one or make one. I want to use this xml to use Dons Hyperfilter and remove all games that my arcade doesn't support. Thanks edit: Nevermind I see what I was doing wrong. I needed that XML file from the mame website.
Last reply by SpatzST, -
- 2 followers
- 6 replies
- 93 views
I just picked up a complete arcade upright system that boots directly to Hyperspin... how do I toggle between Hyperspin and back to Windows? I assume its a keyboard command. Sorry but obviously I'm a novice with this stuff. Thanks!
Last reply by tonyd6269,
