Support
Having problems with HyperSpin? You've come to the right place!
4,041 topics in this forum
-
- 2 replies
- 220 views
Hi all, is there a guide for how to properly set up FP for hyper Spin? I can open future pinball and load table and it works great but when I use rocket launcher ui I get errors and the table is unplayable. i popped all my tables and associated files right into the future pinball "tables" folder and used that as my Rom location. felling pretty lost :/ thanks
Last reply by dazzlaa, -
- 9 replies
- 282 views
How can I get HS to start games without that bezel and without starting on top of HS? I'd like it to just start games with black borders around it. I have Bezel -> Enabled set to False in RocketLauncher, but it's still showing up. I've attached an image of the issues.
Last reply by Metalzoic, -
- 4 replies
- 276 views
Hi all, another day, another problem! So on the default wheel set up I noticed "Daphne" and wow, Dragons Lair, I havent played that since I was a boy so now I gotta have it! After being reletively successful with the other systems and having everything running and looking pretty good I was quite confident with carrying on but wow, I cannot get this to run at all. I have all the .txt files and a complete set of Roms and video files but it always says incorrect vldp file used. Is there a full set up that just works anywhere? Thanks Again
Last reply by wallmachine, -
- 1 follower
- 2 replies
- 210 views
I have a few issues regarding navigating the main menu as well as exiting games in Hyperspin, hopefully you guys can help. I use two Ultrastik 360s, and every time I choose a game, upon pressing the P1 Start button in HS, the menu will scroll maybe 15-20 games either up or down as the selected game is loading. So every time I exit the game, I'm 15-20 places from where I left. Another spinning issue is when using the "select letter" navigation feature, where holding left or right for a certain amount of time brings up the starting letter for games. After I choose a letter, and hit the P1 Start to select it, the fast scrolling happens. It usually scrolls way longer tha…
Last reply by Quattro, -
- 1 follower
- 3 replies
- 257 views
Hello , Could somebody please give the extensions line for retroarch . I removed it by mistake . In Rocketlauncher global , emulators , retroarch and then the extensions line . Thank you
Last reply by thatman84, -
- 4 replies
- 309 views
I've been updating my video preview files for all pinball games each time i'm in Future Pinball. Some of the frames for each game that show preview videos are horizontal when they should be vertical. How do I change the frame so that each time a preview plays, its correct and not turned to a clockwise position? Please see attached image.
Last reply by 32assassin, -
- 4 replies
- 218 views
Disregard
Last reply by Metalzoic, -
- 0 replies
- 182 views
I have been trying to get the old mad dog mccree working today on RetroArch 3do emulator but the cursor speed moves so slow! Does anyone know of a way to improve this issue? maybe retroarch is not the best emulator for 3dio?
Last reply by dazzlaa, -
- 1 follower
- 1 reply
- 177 views
I set up Hyperspin hard drive IAW the directions and everything is working alright, but when I try to get into a game I get ""cannot find H:\Hyperspin\modules\mame.ahk you do not have a Hyperspin 2 module for ****(whatever). Please create one or check hyperlist" I'm sure this is a common thing, but I thought I got everything with the hard drive I bought.
Last reply by gigapig, -
- 1 reply
- 194 views
Hi guys, So I have moved on today to creating a single wheel menu option to directly launch street fighter IV. I have the wheel option there, it has the correct logo and the game launches fine. But I wanted to add backgrounds and video etch similar to what has been shared here : However I cant get any theme additions to load at all. I copied over the SNES folder to my media folder and then manually changed the contents, I guess that was my problem but now I feel im digging myself deeper into the hole and would like a suggestion or two. Many Thanks Daz
Last reply by dazzlaa, -
- 6 replies
- 219 views
Hi guys, So I am continuing on this long journey to create my cabinet and I have moved onto Gensis games now, I have decided to use RetroArch for the games and 90% of my roms launch to a black screen. If I open up RA directly I can open rom but it needs to look into the zip file itself and opens via the .bin files. I need to make RL open inside the zip but its not doing it. Edit: It seems No 7z files are opening?
Last reply by dazzlaa, -
- 6 replies
- 246 views
Recently my Hyperspin build just stopped launching games. I can launch them in the respective emulators but through hyperspin it is not working now. Also RocketlauncherUI will not open at all. Attached is the message I get when I try to launch a game through Hyperspin. It just pauses for a few seconds and this pops up.
Last reply by Metalzoic, -
- 7 replies
- 228 views
I have two Ultrastik 360s connected (both have been set up correctly) and I cannot get Hyperspin to stop spinning after pressing just one direction on a joystick. I've read some solutions to this issue and the common fix seems to be assigning the stick directions in JoyToKey to keyboard arrow keys. I've attached an image of my JoyToKey setup. Even when I just use the keyboard's arrow keys to try to navigate Hyperspin, it still infinitely scrolls after one key press. I have both Joysticks set to disabled in HyperHQ as well. Also, I'm using the Hyperspin Startup Script for the sticks because Hyperspin wouldn't recognize any inputs from the sticks whatsoever before I ran the…
Last reply by BATTLEDONKEY, -
- 35 replies
- 622 views
Next problem , And i can't find the solution 2 pc games , i set up joytokey for navigating trought hypespin with xbox 360 controller . Everthing works fine . But if i start up a pc game and i exit this game , my xbox 360 controller don't work anymore . I started hyperspin in window , and when i exit the game , i see that joytokey just closes . I had just the same problem with xpadder . I associated hyperspin in Joytokey , i added hyperspin.exe in HyperHQ to start up auto . But joytokey keeps closing after i exit a pc game in hyperspin . Am i missing something in the settings ??
-
- 1 follower
- 5 replies
- 245 views
Hello, hope you're all doing well. So I'm very new to Hyperspin / RocketLauncher and have been using all the guides here to get going. I'm about 95% done with making everything work thanks to the guides but have run into an issue with my Joystick. I've got Joy2Key and I have mapped all my buttons with it and everything works perfectly. Menus and getting in and out of them, and Gameplay is Perfect as well, as long as I have my Keyboard plugged in along with my joystick. But as soon I unplug my Keyboard and run everything, the Menu works perfectly fine and I can navigate as normal, but when I go to start a game, I get the following error: …
Last reply by Spawk, -
MAME 0.190
by Ridu83- 9 replies
- 343 views
Hello, i need some help on getting MAME running with hyperspin. I installed MAME 0.190, got the correct Roms and i can start Games via Mame 0.190 i configured RocketLauncher and HyperHQ like done before for other systems which are working well. i did an audit for the games and most of them were found and highlighted green. when i try to launch a game via rocketlauncher it wants me to check if i have the correct version of emulator for this module. i think this is a problem with the mame.ahk version 0.166 how do i get or create a mame.ahk for version 0.190? Thank you
Last reply by Creezz67, -
- 1 reply
- 190 views
Hi Started to config my controls for hyperspin/rocketlauncher . controls for hyperspin trought rocketlauncher are oké and working . Profile name "p1" My problem is a pc game . I selected system game , selected my game i want . Config under "p1" And both are working in xpadder . But from the moment i start the game i see that xpadder closes ? It don't load the xpadder profile of the game ? Is there any other setting i forgot
Last reply by defre1976, -
- 3 replies
- 194 views
Hey everyone ive decided to tackle a hyperspin build. This isint the first time but this is the first time im trying to do it to full completion. That being said i would like to remove the (usa,Japan) from the rom title on the wheel. i have a feeling this is a naming convention issue that will need to be tackled by renaming the rom specifically is that correct? if that is correct...what is the best tool to use for the renaming of the specific rom as well as generate a new XML list to show correctly? or am i way off base with my thought process... Looking forward to the help. Thanks,
Last reply by 32assassin, -
- 1 follower
- 5 replies
- 202 views
Hello all. I just picked up an arcade cabinet that from a guy who does hyperspin builds. Although it is mostly set up, it has a few issues that I need get taken care of right away... and a few that are not a must right off the bat, but I will be taking care of in the near future. I am new to trying to navigate through forums and I am not doing too well at finding threads on what I need to do to fix my issues. So if people can link me to threads that would spell out how to fix my issues, then I would greatly appreciate it . I am as new as you can be to this system so I will provide you with what little I know that I have. I was told it is the latest version of hyperspin a…
Last reply by richie_jones, -
- 2 replies
- 196 views
SOme times when i play a game in mame or other the wheel suddenly pops up and the game is running in the background , i dont know what it is but it is annoying as hell . Maybe some one that has had the same issue got a fix for this any help appriciated
Last reply by StyleMaster, -
- 1 reply
- 233 views
Does someone have or knows where to get an updated MAME controls.ini and colors.ini file for LEDBlinky?
Last reply by richie_jones, -
- 1 follower
- 2 replies
- 245 views
Hi guys, First post. I purchased a 6TB system off the website in December. I was overseas until several weeks ago and finally attempted to begin the installation process as outlined in the User Guide file. The installation was going well until it came to the step regarding Daemon Tools Lite. I got stuck at the following instruction: "You need to add a virtual drive. The virtual SCSI drive (see image in set up guide ) must be set to drive " K" and the existing drive DT-0, set to drive "L". To get the virtual drive you must add SCSI drive to Daemon Tools" My problem is I can't see the Hyperspin Drive system on the SCSI drives to rename…
Last reply by richie_jones, -
- 3 replies
- 239 views
Hi , I added MonacoGP.exe on my wheel . But how to bypasse the selection launcher , so the game start immidialty in rocketlauncher or hyperspin http://forum.arcadecontrols.com/index.php?topic=134445.0 Could somebody help , or send my any direction where they share AHK files or where you can request them . I totaly don't know how to start to create one . thx
Last reply by defre1976, -
- 2 replies
- 221 views
I am new to Hyperspin. I currently have V1.3.2.0 setup with all systems and roms. I started testing to make sure everything is working. Well, it is not hence why I am posting in here. I got Rocketlauncher to successfully test super nes games and they load and play. The issue is with Hyperspin. I get to the point of the screen loading complete and then it transitions to a black screen and I can move the mouse and that's it. I have to press Escape key to get out of the black screen. It seems to be an issue between Hyperspin not directly communicating with RocketLaunch or something along those lines. The log is posted below. 03:01:07 PM | HyperSpin Started …
Last reply by luc2010, -
- 5 replies
- 243 views
So I have MAME working, but I want to auto start a specific game when Hyperspin launches. Am I missing something? There doest seem to be a straight forward explanation of this, and I haven't been able to find a tut... Thanks for any help...
Last reply by parkersworld,
-
Popular Contributors
