Support
Having problems with HyperSpin? You've come to the right place!
4,028 topics in this forum
-
- 2 replies
- 95 views
Hey Guys, I have this emulator setup via retroarch however when I try to load a game I get an error. Is there a tutorial on how to setup this emulator? I am not sure the issue I have. I have posted my log. 22:25:32:947 | RL | INFO | +N/A | Main - RocketLauncher v1.0.1.4 (www.rlauncher.com) 22:25:32:948 | RL | WARNING | +0 | Main - You have "Logging_Show_Command_Window" enabled. This is only for showing errors being dumped to the command window from an executable. This may cause issues with running some executables and needs to be turned off when you are done. 22:25:32:950 | RL | WARNING | +0 | Main - You have "Logging_Log_Command_Window" enabl…
Last reply by demonseed, -
- 3 replies
- 74 views
Hi, Issue: When I start a game in hyperspin it loads the mame menu and doesn't go directly to the selected game. First, I have to select the game in hyperspin, then after the Mame menu apepers I also have to select the game in Mame before the game loads. I used to be able to selelct a game in hyperspin and it launces the game via mame without taking me to the mame menu. It was working correctly in the past, but I hit some unknown setting and I can't change it back. Anybody know what is causing this issue? - Michael
Last reply by michaelhyperspin, -
- 0 replies
- 66 views
Hi, I just discovered there is an unused switch in my tank stick for the middle mouse button for my trackball. I want to use it to set up a exit back escape button, that is out of the way on my tankstick. I am trying to figure out how to use autohotkey so when I press middle mouse button it sends ESC key instead and ultimately exits games and goes back to hyperspin. but so far it only seems to work within hyperspin as far as a back button but I cant end a game with it. Please! can anyone help me out!? I love my tankstick but the only downside is that there is no good place to set up a esc button that is not in the way. and I know yes you can set it so you press 2 but…
Last reply by godisnothere, -
- 1 follower
- 7 replies
- 85 views
Hello guys! i ve tried to open my hyperspin many times, but when he opens, chrome pops up with a new tab! i saw a .exe named as "hyperspin Srv" in c:/hyperspin , tried to delete, but when i open hs, he returns again... i try malwareantibytes, but he dont found nothing tks
Last reply by chrisfirex, -
- 1 follower
- 8 replies
- 98 views
So after spending a couple weeks getting everything setup and working correctly i messed up today. And everything was working great i cant belive i changed anything.. This morning when i opened rlui and hyper hq (i wanted to adjust a wheel setting) I was prompted to update the program, i think it was for RLUI... im not sure honestly. Anyways like a fool i downloaded and applied it and now nothing inmame works for me anymore. After a couple hours of googling i feel stuck and im not sure what to try next my error is in the pic attached, im sure its something simple im overlooking
Last reply by chefishman, -
- 3 replies
- 96 views
I created some genres to keep track on the many arcade games. Is there a way to set a default genre in hyperspin? It always starts with all games.
Last reply by Avar, -
- 0 replies
- 40 views
I need help with solving a problem with Hyperspin, where when completing a game that has separate disks you can't change over because a error message is popping up saying, I haven't got the right module to load it up but I haven't got the right one, it's requesting in my files. I was wondering if anyone has had the same problems and knows a way around this issue. Sent from my iPhone using Tapatalk
Last reply by Raven94, -
- 2 replies
- 69 views
I ran an update and now no games on any of my system are found. This is the error I get when I try and open A game. The wheels and videos are there. Any help would be GREATLY APPRECIATED!!
Last reply by cycojedi, -
- 1 follower
- 2 replies
- 56 views
Hi, I'm experiencing two problems and I can't figure out what's going on. First when I check "roms only" on the wheel option on HyperHQ, Hyperspin won't take me to the Mame wheel. And the second problem is stranger, When I try to load some roms using MAME I get an error message telling me that are roms missing, but they run perfectly when I run them from Hyperspin. For example if I try to any Samurai Shodown game straight from MAME they won't run at all, even if I switch to the Neo-Geo bios. Any ideas of what is going on?
Last reply by Xerge, -
- 3 replies
- 50 views
Need help solving a problem with Hyperspin when changing disks when you completed the first one.
Last reply by Raven94, -
- 1 reply
- 57 views
Launching a gba game using mgba emulator (games test fine in RL) receive the ahk error pictured below, so I create the folder it says is missing and placed the ahk file in there. Trying again it creates the second error that I can't really make heads or tails of. the emulator works fine outside of hyperspin. Can copy and paste my rocketlauncher log if need be. Thanks for your time.
Last reply by teamherosquad, -
- 1 follower
- 2 replies
- 67 views
I've setup Hyperspin 1.4 and RocketLauncher on a USB 1TB hard-drive. I followed the Simply Austin video. The drive has been identified as Q:\. All files are on this drive. Q:\Hyperspin\ Q:\RocketLauncher\ Q:\ROMS\MAME\) All the configuration has been performed using my Windows 10 desktop. Only MAME has been finalized. The filter ROMS only is set to true, i have ROMs in the defined ROM folder (Q:\ROMS\MAME\). When I run Hyperspin on the desktop I am able to load Hyperspin, select the system wheels (Atari, Sega, Mame, etc). When the Mame wheel is selected, I am able to see the applicable ROMS that are in the ROM folder. The wheel art and videos all funct…
Last reply by jbrodie, -
- 1 follower
- 25 replies
- 216 views
Hi everyone. Hope you've all had a good Xmas. Now ive got this problem that won't seem to go away. Sometimes when I turn my machine on, i can play a game but when trying to exit back to hyperspin everything freezes! I then have to restart the pc as it doesn't respond at all. Im only using mame with hyperspin - no other emulators. This is driving me crazy as nothing seems to cure it. Also, it doesn't do it every time. Can anyone help? Mameuifx.159 64
Last reply by Martin0037, -
- 2 replies
- 75 views
I received a 4TB internal hard drive as a gift and set it up in a new PC to connect to an iPac 4 in my arcade cabinet. I followed the install instructions the best I could but I may have made mistakes. I'm hoping for solutions to the following issues: 1. Hyperspin boots fine but neither the iPac 4, keyboard, or Xbox controller work when it is running. 2. Hyperspin boots at startup but I'd like to be able to stop it so that I can address possible issues with my install, how do I do that? 3. While installing the required programs for Windows 7 64bit, I was unable to install 2015 c++ 86. I thought it installed the first time but I may have been directed to res…
Last reply by rastan, -
- 1 follower
- 2 replies
- 68 views
Everything was running fine yesterday tried to run a game through Mame and it just loads up the emulator and not the game? Other wheels that use mame run fine it just when i choose a game through the mame wheel? I have deleted and reinstalled through hq and still the same Posted my log below HS and attached my RL log 08:24:52 AM | HyperSpin Started 08:24:52 AM | Going FullScreen 08:24:52 AM | Checking for updates 08:24:52 AM | Update Check Complete 08:24:52 AM | Startup program unavailable 08:24:52 AM | Error intializing joysticks 08:24:52 AM | Menu Mode is multi 08:24:52 AM | Loading Main Menu.xml 08:24:52 AM | Main Menu.xml successfu…
Last reply by Samorite, -
- 0 replies
- 70 views
hi, I have successfully installed hyperspin and mame, working fine on my duo core windows 7 computer. I got Ipac set up for the controls, green light is on. But when i am testing with a keyboard testing program the buttons will not respond. just some of keys will function, but some seem to be dead. tested all other usb inputs en even reset them, no luck. I am not sure what i am doing wrong here. Any help would be welcome. gr Pieter
Last reply by PieterKamp, -
- 1 follower
- 5 replies
- 81 views
Hey everyone, Love hyperspin and just got it up and running not to long ago. but I noticed like when I run dkong or any other rom with a bezel it is cropped on the top and bottom? How do I get it to show on the whole screen? I have the latest Hyper Spin and the updated Rocket Launcher as well. I followed SimplyAustin on setup and all seemed good, but my bezels are cut off. I am using the latest Mame 1.8.1 and not the UI version. Any thoughts? Idaho Tech
Last reply by Metalzoic, -
- 1 follower
- 3 replies
- 79 views
Hey All, I finally got Intelivision set up and working with mess, however I am not sure how to set up the controller. I know how to set the keys, but their controls were confusing with all kinds of numbers. I am using a xbox 360 game pad and wondered how you map your keys? thanks Jim
Last reply by wesfranks, -
- 0 replies
- 67 views
I haven't tinkered around with my arcade in quite some time, so I thought I would try and play some of the light gun games. After a bit of frustration, I've realized that the aimtrak guns work perfectly when I launch Area51 from MAME directly, but goes bananas when I try and launch it through HS as I would any other game. For example, the aiming is a bit shaky, and the first time I shoot off screen, the crosshair goes away completely. Has anybody else had this problem? Area51 has worked correctly many many times, so I'm not sure what happened!
Last reply by coldcoffeecup, -
- 3 replies
- 57 views
I recently bought an arcade machine that uses hyperspin. Issue: I add a game to my favorites wheel, then I "view favorites" and the game I added isn't there. Can someone help? I'd love to be able save games to the favorites wheel! Note: I am able to delete games from the favorites wheel, just not add them. thanks D
Last reply by DamienJ, -
- 10 replies
- 88 views
Maybe someone can enlighten me. I have allready send a email to Hyperspin en Nintendo but no answer from both. I have build a (genuine drive) Hyperspin arcade cabinet and retropie arcade cabinet. I'm thinking about selling them on order but dont want to get in trouble with copyrights and all. I have read on the Nintendo site that is ILLEGAL to distribute/sell/own Nintendo roms (even if you have the original, keep them for 1 hour, etc etc). They are the only one having copywrights for them. How does Hyperspin pull this off? They dont have license for them, i cant find it anywhere on there site. I have send 3 mails asking this because i want to buy some drives, they as…
Last reply by rastan, -
- 1 reply
- 67 views
Hey guys I've been working for a good 2-3 hundred hours on my bartop arcade at this point and I'm losing my mind now. Curious to know if my build is strong enough to run HS with dolphin / pcsx2 / PPSSPP in particular. As it stands I have settings well above native res but I don't see why this isn't running smoothly as it runs SMOOTH outside of HS directly from the emulator or launched from rocket launcher. Anyways, this is what I've got going : Windows 7 pro G3258 at 4.1ghz 8gb ddr3 1600 GTX 750TI I'm hoping I'm not capping out my two cores with the emulators and throwing HS in the mix is taking it past its limits... …
Last reply by nlen83, -
- 0 replies
- 75 views
Ok so it has been a long time since I added a system and I am kinda foggy as to the steps. I added next supergraphix this is what I did. Added it in rocket launcher. Pointed to the XML database to generate the list, then tested in rl it all works. I set up the wheel in hyper hq.... But when I went to hypersynce and scanned it said no new media and it didn't download any? I had to manually do it. I just thought that maybe u have to have folders for media etc set up in order for it I work? Can someone clarify how I get all the media. I appreciate it. *** Figured it out… I had to go into settings in hyper sync to get it working**
Last reply by demonseed, -
- 1 follower
- 0 replies
- 50 views
I have Hyperspin's attract mode enabled. I noticed that when attract mode kicked in on the Main Menu wheel that it never actually selected a sub wheel to go through. So I manually selected a sub wheel and let attract mode kick in again. I noted it randomly spins through and selects individual games but never moves to another wheel. Is there any way to make attract mode randomly move to a different wheel? I could probably throw together an AutoHotKey script to do it if a built in way doesn't exist.
Last reply by pdavis, -
- 1 reply
- 58 views
Hi all, is it possible? Looking to have my HyperSpin with black bars on the left and right.
Last reply by Agrajag,
