Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,053 topics in this forum
-
- 4 replies
- 160 views
I just got ePSXe working within HyperSpin. Once ePSKe is launched. is there any way to program a button (or combination) of buttons on my controllers (Logitech) to exit the game? OR Is there a button on my X-Arcade controller I can program to perform the ESC function. Usually when I am in the emulator playing the game, the X-Arcade controller is not functioning. I use the X-Arcade to navigate around in Hyperspin (and for old arcade classic games). Thanks for any ideas of how to exit an emulator like ePSXe and return to HyperSpin menu without having to get my keyboard and hit the ESC key...
Last reply by kylecp1979, -
- 6 replies
- 205 views
...the epsxe.ahk module (v1.9) in RocketLauncher doesn't work with the new ePSXe 2.0.2-1 version. Does anyone know where I cab download a version of epsxe.ahk newer than 1.9? I cant find any info when the update will be made to RocketLauncher. Thanks,
Last reply by craig816, -
- 0 replies
- 105 views
minha duvida é como emular gp32 tenho até o emulador geepee baixaei o firmware mas ele trava no meio do jogo
Last reply by PequenoJef, -
- 9 replies
- 259 views
Not sure what I'm doing wrong here but hopefully someone can help. Hyperspin & Rocketlauncher are fully updated I followed this guide setting up Daphne.... http://www.hyperspin-fe.com/topic/2161-complete-guide-for-daphne-in-hyperspin-and-RL/?hl=%2Bdaphne+%2Bhyperspin I'm about 99% sure I have this all set up properly, & can start every game on DaphneLoaders list except Thayer's Quest (no idea where to find the dvd) & 1 other game I can't remember right now. But when I try to start these up in Rocketlauncher to test I get this screen. 2nd shot just just a pic of the full screen, Upper left corner says Daphne got an error. A good chunk …
Last reply by snstay, -
- 3 replies
- 114 views
Is the a setting setup for the nes to reduce lines glitching flickering ??
Last reply by Styphelus, -
.thumb.png.127308b853d221dc2e5e433743b16269.png)
- 1 follower
- 6 replies
- 190 views
Hey guys, I'm trying to get WinUAE running, and I've read about every guide I have seen online. Followed good ol' simply Austin's to a T... Whenever I load a game though, I get the following: Dos Error #205 (Object Not Found) on loading "InsertGameName.slave" Can someone please tell me what in the bloody hell this error is, and how I can fix it??? I can't find any useful info online, it's all about people using real Amiga hardware! It's just so frustrating lol especially on a system I wasn't even going to add... https://youtu.be/5QQdNbvSGok?t=6s
Last reply by gigapig, -
- 2 replies
- 217 views
Hello, I'm having trouble with the the MAME .173 in the downloads section. The physical keyboard and my mapped controller are working fine, but keystrokes sent from xpadder are not. I've had this issue in the past with MAME, but using the executable attached in the first post in this thread always fixed it for me: http://forum.arcadecontrols.com/index.php?topic=141243.0 Starting with version .172, it has stopped working. Has anyone else had this issue? Is there a fix?
Last reply by Tribe Fan, -
- 6 replies
- 165 views
could someone tell me what is the best shader option used for SNES my rom seem dark when loaded thaks
Last reply by damageinc86, -
- 6 replies
- 130 views
Hi, does anybody have an xpadder profile for AAE using xbox controller? This emulator doesn't support other controllers than keyboard, so maybe someonehere have done it that way? Cheers!
Last reply by Rent_Demon, -
- 3 replies
- 160 views
Hi everyone, So i have a question about the sega cd's. Since all the roms i have come in: Gametitle.iso + Gametitles CD01 - 35.mp3 (so thats 35 mp3 files) How the hell do i load this into mame ? Thanks in advance i have also tried fusion, but every time i try to load up a game it tells me to go and configure some stuff in the bios...?
Last reply by 32assassin, -
- 1 follower
- 2 replies
- 140 views
So I'm still on Hyperlaunch (haven't changed over to Rocketlauncher yet) and in moving from MESS 158 to MAME 172 for SNES and other home consoles I notice there's no save files working. IE in Super Mario when you select your game save at the title screen everything comes up "empty". My only thought is that maybe the MESS module is sending some incompatible command to MAME? There's apparently a bug in .172 that disables console saves if using fullpath vs. software list, which probably isn't helping. Anyway let me know if you think there might be a solution here. Thanks!
Last reply by scoodidabop, -
- 0 replies
- 108 views
Hi guys Ive got a question to ask and wondering if anyone else is experiencing the same issue. Ive built a driving cab and have setup MAME in HS. When I launch a mame game from HS the on screen Hi/Lo gear shift isnt there but when I run a game just using mame outside of HS the gear shift is there. Ive attached 2 screen shots the first one with the gear shift on screen(mame) and the 2nd without (HS\mame) Im completely puzzled by this. I have tried various versions of mame that include the gear shift but same result. cheers
Last reply by Maddo, -
- 1 reply
- 104 views
Could someone tell me what is the best shader option is for SNES, my ROM'S seem to be dark for example the adventures of batman and robin is really dark if someone could help me brighten it up that would be awesome thanks
Last reply by kylecp1979, -
- 1 reply
- 117 views
Hey everyone! I've been trying to get Xpadder to work with Mame but i've been unable to do so ever since they swapped over to Raw input, it's not been an issue until now as i've been running two different versions of MAME to get around the issue but now im kinda getting stubborn enough to attempt to get to work. The featured download of the Mame patch with Forced Direct Input should work with Xpadder? or does it force RAW input aswell? if it dosnt work then does anyone know the SRC of MAME well enough to know where i need to change it before compiling it to work with Xpadder? Thanks
Last reply by rastan, -
- 2 replies
- 143 views
Hi Guys, I am really struggling getting my controls working with my setup. I dont seem to be able to set them in HypersHQ. So I am unable to select anything Any Ideas? Sonix
Last reply by kylecp1979, -
- 1 reply
- 118 views
When launching Nes or Snes I get a lag on both sound and the game any ideas for fix. Also when launching n64 system crashes please help
Last reply by thcdgaf, -
- 1 reply
- 138 views
So my daphne quest is just about done. Got everything set up and configured in daphneloader. Everything set up and configured in rlauncer except Esh's Aurunmilla. Like i said it runs in daphneloader but when i try to launch it in rlauncher it says its got a parcing problem. Anyone had this happen or can give me a solution? Thanks
Last reply by snstay, -
Finally going back to this system again. I have it running perfectly with Medafen, however I can't get Pia Carrot (translated) to work. Medafen always says "Uncorrectible data". I tried Magic Engine FX but it won't detect the cd-rom, no matter what I do to it. Retroarch loads the game but the screen goes black after piking a uniform right at the start of the game. The game runs fine in Medafen without the English patch. Has anyone been able to get this game with the translation patch to work?
Last reply by thcdgaf, -
- 33 replies
- 554 views
I have made a postlaunch script for this game that will automatically reset the network settings so you won't have the horrbile delays when selecting character and in other parts of the game. I had to tweak the hell out of this before I got it to work. It finally works great for me. I hope it will work for others too. Wacky Races.ahk If it doesn't work for you. Please try changing the second line that says "Sleep, 3500 to a higher number. 3500 means that it will wait 3,5 seconds before it starts to do the settings. Let me know what you need to set it to for it to work so I can upload a version that will work for more people.
Last reply by Dime333, -
- 10 replies
- 213 views
I gotta fun one for you guys today! So it's come to my attention that the Gens core in RetroArch is FAR superior to PicoDrive in about every way when it comes to emulating SMS, GG, Genesis, 32X, & the Sega CD. As such, I'm trying to switch over from the PicoDrive core. Now, because my system is so completely whackadoo, there's not really any documentation on how to make this work, but I DO BELIEVE it's completely possible, I just don't know how. On my build the Genesis, 32X, and Sega CD are in one single wheel under Genesis. (I re-branded it, but it shows up in RocketLauncher and the folders as Genesis) Now, I can launch any genesis game with default module setting…
Last reply by thcdgaf, -
- 8 replies
- 142 views
Hey all. I have retroarch being awesome for other consoles but Psx is giving me grief. I followed the Austin guide for playstation but get a retroarch closing error and eventually a RL timed out error. I did some reading of the module for retroarch and couldnt pick it. Some googling had me looking at the Psx bios to make sure they were in the system files. I have these in there: Dtlh3000.bin, Dtlh3002.bin, SCPH101.BIN, SCPH1001.BIN, SCPH5000.BIN, SCPH5500.BIN, Scph5502.bin, Scph7000.bin, SCPH7001.BIN, SCPH1001.BIN, Scph7003.bin, scph7502.bin. Are capitals an issue at all? Caps seem to be all over the place. Cheers Bruiser
Last reply by thcdgaf, -
- 0 replies
- 99 views
Hey fellow gamers, I had all my emulators running games nicely, I set Mame up first and now after setting a few other emulators up, Mame now comes up with new select menu (see picture) after i select game and wont load games. More than likely something i did or pressed somewhere, any help to fix this please I will would be very grateful. and this is my second post so sorry if it is in wrong spot.
Last reply by RumblesArcade, -
- 8 replies
- 248 views
Is it possible to make per-game configs in retroarch ? I see the option in retroarch configuration, but don't know how to get it work... Anyone tried this ? Thanks Pind112
Last reply by Awakened, -
- 1 follower
- 5 replies
- 156 views
difference between games that require chd vs games that dont I noticed Street fighters III (U and J)require Chds and won't load but the Asian version doesn't and i can play it I have a whole mame 0.171 romset but no CHDs. I want to use the mame roms and media for other systems such as atomiswave, cp123 and naomi but some games won't run (also i noticed the xml for capcom play system here uses clones instead of the parent rom ) how standard are the xml files here, had to rename a lot of videos wheels and some roms to match the xml what minimun specs do i need to have to make a pc arcade, for this i want to buy a cheap used pc from craiglist, but want my games to run smo…
Last reply by Logics21, -
- 6 replies
- 183 views
Is anyone here using Atari800Win Plus to emulate the Atari 5200? I tried setting it up but every time I do, the emulator starts and seconds later a monitoring window that looks like DOS pops up. I have to close the emulator completely, meaning that I can't set it up. How do I stop that window from popping up? Atari800 works (the DOS lokking version) but I'm not able to setup my gamepad and the screen always shows a black bar at the top. If I go into the options window, The screen shits back up and black bar gets removed , but next time I start a new game, I get the black bar again and need to bring back the options menu for the screen to shift itself back into positio…
Last reply by Krakerman,
