Support
Having problems with HyperSpin? You've come to the right place!
4,038 topics in this forum
-
- 17 replies
- 524 views
Hi guys, I have dreamcast working nicely with demul, with one (major) problem, I can not get it to go into full screen. Any ideas? Config --> Video --> Use Fullscreen Enabled Tried different resolutions, stretch etc it always stays windowed. Any help please? EDIT - ALT Enter just stays in fullscreen for a split second and then returns to a window.
Last reply by showstopper, -
- 5 replies
- 418 views
I had NullDC setup to handle Sega Dreamcast (cdi,gdi) So I received the NullDC error [(“Unhandled exeption while initing image reader plugin by drk Raziel & Gigaherz (April 11 2012)] that seems to come out of nowhere after not using the system for awhile. I solved this issue by just re-extracting NullDC into it's folder again and overwriting any existing folders. I can confirm NullDC will run games outside of HS/HL without an issue. My problem comes when trying to run a game from HL, I receive the following error It's been a long time since setting up HS/HL and my global bezel setting is false and other systems run fine without an issue. I searched through the…
Last reply by vampirolatino2, -
- 2 replies
- 276 views
Hi As title says I don't wish to overwrite my mortal kombat 2 rom so how or is it possible to have two of the same roms so I can add the patch so have both of them in my mame section Thanks
Last reply by Beardedgamer23, -
- 3 replies
- 261 views
This just started happening this afternoon, it was working fine this morning. I launch Hyperspin, select an emulator, and Hyperspin completely closes.. I have no idea why. Anyone have suggestions?
Last reply by vampirolatino2, -
- 4 replies
- 2.2k views
Hi, I just configured my snes9x for SNES. Everything works fine so far, besides the save issue. I read on the forums, that HyperLaunch kills the emulator-process, instead of quitting it properly. So I need to configure HyperLaunch.ahk, so it sends Alt+F4 instead of CloseProcess. How do I do that? Can someone write me those few lines or link me to a thread with similar problem? I searched the forums for a long time, and found nothing related. Thanx. tpax
Last reply by potts43, -
- 3 replies
- 375 views
I can launch perfect with HyperLaunch, but not working in either Hyperspin or HyperlaunchHQ.. Anyone? [code] 08:11:17:987 | HL | INFO | +N/A | Main - HyperLaunch v3.1.0.4 BETA (www.hyperlaunch.net) 08:11:17:029 | HL | INFO | +47 | Main - System Specs: HyperLaunch Dir: C:\HyperSpin\HyperLaunch HyperLaunch is: 32-bit OS: Microsoft Windows 7 Enterprise SKU: Enterprise Total Memory: 8069.22 MB Free Memory: 6429.22 MB Used Memory: 1640.004 MB SystemType: 64-bit Physical Processors: 1 Logical Processors: 4 GPU 1 Name: Intel(R) HD Graphics 4600 GPU 1 RAM: 1024.00 MB GPU 1 Driver Version: 10.18.14.4080 Soun…
Last reply by marksc91, -
- 8 replies
- 410 views
I am having a problem with using hyperspin and hyperlaunch, when I go to open a rom for a specific emulator nothing happens. If i disable hyperlaunch and just use hyperspin the rom will launch though. Any suggestions? or help please?
Last reply by mastermark, -
- 1 reply
- 244 views
*EDIT* I actually had an idea of how I might be able to get it to work and I have solved my issue. Guess I just needed to ask to get my mind working. Hello I am a bit new to hyperspin. I have been able to setup some different emulators and steam but I am having trouble figuring out how I can configure hyperspin to use MPC (Media Player Classic) which is my preferred media player. I want hyperspin to launch movies and other content via MPC. I know how to created a list of my movies and stuff but my problem is configuring a module and emulator that will allow me to do what I want. Please if anyone can help me figure out how to do this I would be very grateful.
Last reply by AxelTerizaki, -
- 4 replies
- 625 views
I'm having a problem with the wheel art for two of my systems. On the main menu for Gamecube and Playstation the default text shows. If I select that system and then back out to the main menu the logo shows. How can I fix that? Edit: After deleting the existing themes and waiting a couple hours (not sure why that was necessary??) Hypersynch finally recognized the files were missing and brought them back down. After that they worked fine again. Still not sure of the reason for the issue in the first place but glad it is working now. Thanks.
Last reply by THK, -
- 1 reply
- 207 views
Hi all As title says have mapped my controller in xpadder works with name perfect When I try to map with dreamcast (demul) it picks up my pad but when I load up in hyperspin and pick a game pad won't work Please don't drill me on this I am new to it and it's driving me mad lol
Last reply by Styphelus, -
- 4 replies
- 284 views
Hi all New to here and hyperspin Loving the retro gaming but taking me a while to get use to it all As the title says when playing mk4 from the start the sound is doubled and during gameplay also Any ideas why for a hyperspin noob Thanks
Last reply by Beardedgamer23, -
- 3 replies
- 336 views
Hey guys I've been enjoying my arcade machine for a couple of years now and have decided to finally investigate a problem I've had since day 1 and that is a delay of about 2 to 5 seconds delay after pressing on the game i have selected before the loading screen starts. I use HLHQ with with one system (MAME) with all themes and vids working and have researched others posts to find no answer. Any input would appreciated. Thanks
Last reply by vampirolatino2, -
- 1 reply
- 256 views
When using a CRT television - ya know those silver-cased babies from the early 2000s with lots of inputs - is there a preferred method for connecting the PC? I've read about people using VGA>S-Video adapters with good results but wouldn't component video lead to a better image? There's a few threads I found out in the wild that talk of a Component YPbPr output PC video card but I can't seem to locate any decent models.
Last reply by scoodidabop, -
- 5 replies
- 374 views
It looks like there's existing xml files for subcategories under MAME but how do I set up my wheel to take advantage of this sorting method? With over 3500 active MAME titles on one wheel it would be great to have them split into subgenres for easier navigation. I tried searching for a solution on the forum but the only things I could find were a bit antiquated. Thanks!
Last reply by scoodidabop, -
- 11 replies
- 346 views
Everytime I'm trying to open a rom on n64 or any sega system, hyperspin freezes and I can hear the rom running. Once I hit escape it goes to the rom and I can play,but then I must hit escape again and it takes it out of full screen then I have to close that window to get back into hyperspin. Anyway I can fix this so when I open the rom it loads instantly, and when I escape it goes directly back to hyperspin?
Last reply by Jefferrari, -
Anyone get atari 5200 to work with mess 158 everytime I load pacman the screen turns black/
Last reply by vampirolatino2, -
- 7 replies
- 956 views
Hi, I'm having problems with dons hyperlist generator, for some reason it isn't finding any roms at all for any of my emulators, mame and n64, it shows that I have artwork and themes but no game, I've checked all folder paths in hyperhq and they are correct, everything to do on the hyperspin side of things works perfectly, just can't get past this list generator, any help please I really want to get rid of some of these games that I don't want Thanks Just thought I'd add an update here for anyone who might be having the same problem, I never did get dons list generator to work I have no idea what the problem was, I did find this though http://hyperspin-fe.com/oldsite/in…
Last reply by vampirolatino2, -
- 3 replies
- 284 views
Im looking to add Gauntlet dark legacy and I cant get it to run it gets some errors and ill link the pics below of the errors im getting
Last reply by vampirolatino2, -
- 3 replies
- 337 views
Hey guys, I appear to be having a problem with Hyperspin and Hyperlaunch. Hyperspin starts fine, but then when I go to a game and hit the start key, nothing happens. I have looked on taskmanager, and it looks like, when I do hit the start key, Hyperlaunch starts for a second, and then exits. However, nothing changes on the screen. Here is the log: 05:48:27 PM | HyperSpin Started 05:48:27 PM | Going windowed mode 05:48:27 PM | Checking for updates 05:48:27 PM | Update Check Complete 05:48:27 PM | Startup program unavailable 05:48:27 PM | Playing intro video 05:48:29 PM | Error intializing joysticks 05:48:29 PM | Menu Mode is multi 05:48:29 PM | L…
Last reply by vampirolatino2, -
- 1 reply
- 218 views
Hey I tried like 10 different versions on DD roms and all of them start out ok but when there are 2 or more guys on screen it lags wicked bad. And no other Roms do this except for Gauntlet dark legacy Please help
Last reply by vampirolatino2, -
- 2 replies
- 263 views
Im assuming the path has changed, I had a hard drive going bad, copied and transferred to new drive, Hyperspin starts up ok but whenever i choose a game on any system it comes up with a error: CANNOT FIND HYPERLAUNCH EXE I read to change the settings for path location but cant find the Hyperspin settings???
Last reply by wisker, -
- 1 reply
- 303 views
I'm looking to add a second XBOX 360 controller to my Naomi emulation. I have the following settings for standard_jama0_0. I need settings for the a second XBOX 360 controller if possible. I've been searching around for these settings but can't find any. Thanks for any help. Jama0_0: PUSH1 = 805306380 PUSH2 = 805306381 PUSH3 = 805306382 PUSH4 = 805306383 PUSH5 = 805306376 PUSH6 = 805306377 PUSH7 = 1342177280 PUSH8 = 1342177536 SERVICE = 59 START = 805306372 COIN = 805306373 DIGITALUP = -1879047680 DIGITALDOWN = -1879047424 DIGITALLEFT = -1879048192 DIGITALRIGHT = -1879047936 ANALOGUP = 805306368 ANALOGDOWN = 805306369 ANALOGLEFT = 805306370 ANALOGRIGHT…
Last reply by ChrisKant, -
- 3 replies
- 343 views
Hey ll seems like a noob question but im having trouble setting up pacmame. Really what module to use. Would it be the mame one sence its basicly mame games? Thanks Scott
Last reply by snstay, -
- 5 replies
- 289 views
I have just added a pc game to my HS setup, it was Resident Evil HD. I used the gigaguides tutorial, everything was going well until I load the game. The game launches through HL via the rocket tab, HS starts , game loading screen then the error appears ahk_pid 13244, but the game is running in the background.... Does anyone know how to fix this error? I am trying my hardest to learn all this, getting there slowly,the tutorials are great btw. Just the odd error I get thanks in advance
Last reply by Styphelus, -
- 13 replies
- 839 views
Hi...I have a question, let me say im new to the Hyperspin systems. I have a Bartop aracde machine that I have been using for the past two years and I would like to start adding games and other systems. It has the older version of hyper and launch on it. So After taking the back off the back it has a very tiny hard drive 60 gig only so im very limited. I started building a new system on my laptop and its becoming over 60 gigs so I was going to get a External hard drive and use that. So what Im wondering how can I use a external harrdive via usb? The bar top is already configured to boot and go directly to hyperspin. This is where I would need help. Then with Remap…
Last reply by wyldside74,
-
Popular Contributors
