Support
Having problems with HyperSpin? You've come to the right place!
4,041 topics in this forum
-
- 4 replies
- 397 views
Howdy all, I have almost got all my emulators working and videos/pics loaded now for Hyperspin and I am so pleased with the fast and helpful response from the forum members I just have two questions if I may: 1) I know this may be an xppadder issue but when I run xpadder with my X-Arcade tank stick it doesn't recognise it. No matter how many times I disconnect and reconnect it doesn't show up. It shows up in my device list so it is connected because I can play MAME games on it fine. Has anyone used one for their arcade machine? If so is there a work around? Thanks again for any advice, I get my cabinet next week to start putting my machine together can't wait ha…
Last reply by Agrajag, -
- 3 replies
- 448 views
Hi guys, I've been doing a fresh install of hyperspin on a dedicated console system and have been getting no end of trouble with getting my controllers to work. Im using 2 x DS4 controllers with Inputmapper and Xpadder. I'm only focused on HS for now although I've loaded zSNESw for testing purposes and getting a similar issue in there (although I haven't test that thoroughly). I originally tried ghutch's Hyperspin Startup Script but I had a glitch where the dpads wouldn't kick in for 20 seconds. I couldn't work through that so now I'm still using the script but instead using xpadder to map the keys (Joysticks_Enabled=False in the script). This works great for p1, but I …
Last reply by beardydan, -
- 14 replies
- 1.1k views
Well Lads, I haven't asked a question in a while so a real basic one is coming up cos I cant figure it out. I am setting up the above systems in a separate wheel, downloaded the folder on the FTP, my questions are: 1) I have the wheel image *.png, where does this go? I thought it was in the Hyperspin\HyperLaunch\Media\Wheels but it eant loading for me 2) Where can I get the artwork \ intro video for this system? Any help would be most grateful
Last reply by Yardley, -
- 3 replies
- 291 views
So im building a dedicated Donkey kong cabinet, i have setup a dedicated donkey kong wheel for that purpose, but i would like to add the option to have a more games wheel whithin the donkey kong wheel, i just cant figure out how to add the mame wheel shorcut to the donkey kong wheel . Can someone help me sort that problem? thanks for any help.
Last reply by abispac, -
- 7 replies
- 426 views
Hi, I've hunted for this answer, and I cannot find it anywhere. I built a mame arcade cabinet, using an old PC and a small monitor that I had laying around. When I open a game (Kung fu Master as an example), the process displays a message "Loading artwork", and the game is then displayed with a bezel around it. The actual game is displayed very small in the middle of the screen. How do I disable this "loading artwork", so that it shows the game in all it's glory, instead of a mi miniature game with graphics around it. Any help will be appreciated.
Last reply by zerojay, -
- 1 reply
- 322 views
Hi all, I just overwrote two roms in my umk3 zip mame file to play the new umk3 tournament edition. is there a way to add a second umk3 so that i can choose both?
Last reply by what2be, -
- 1 reply
- 286 views
most of my cd based emulators decide to choose my images to be a audio cd's,outside hyperspin its fine,ive tried numerous settings,but have'nt manage to crack the case yet,i know its a setting because i have run these fine before,i cant start again,it takes too long to do over a 100,if anyone has come across this problem before i'd really like to hear from you,as an example:- im using unz for fujitsu fm-towns,the game will start,but i get a type of intro that starts as soon as click the game and carries on for quite a while,ive even reloaded my windows incase i had something opening things it shouldnt do,i can link any emulator up in hyperspin,so if you give me a rough gu…
Last reply by maxcade, -
- 1 reply
- 261 views
As title says just booted up hyperspin have a quick go and scrolling through my systems just noticed that it's using my name video I have made no changes what so ever Any idea how this has happend or how to change it back
Last reply by rexryan, -
- 5 replies
- 341 views
Hi everyone i'm new to this..been reading up a lot on the forum. I ran into a little bit of a snag. I can't seem to launch any games from Hyperspin. I believe the reason is hyperspin is launching the old hyperlauncher not the new one .V3 that I installed in its own folder. I did edit the path in the settings folder but maybe I missed something. Anyone have any idea what I did wrong? I will attach a screenshot of my settings file and my log file http://pastebin.com/hcn6qNFw
Last reply by gigapig, -
- 3 replies
- 430 views
Anyone get choppy sound and a bit of a lag when setting this system up in retroarch?
Last reply by gigapig, -
- 3 replies
- 276 views
I'm having a slight problem with the Pinball FX2 module. When I launch Pinball FX2 from Hyperspin, the multiplayer menu pops up, but I can't select the number of players from my control panel. The joystick moves the selection up/down, but I need a separate keyboard to press 'enter'. I don't have any buttons mapped to 'enter' on my control panel so how would I change this to, for example, key #1 (P1 start) to select the number of players? I tried keymapper, but it didn't work. I never used keymapper before so perhaps I did something wrong. I did a quick search here and on google but didn't find a tutorial. I think I created a key map for all predefined keys in FX2 …
Last reply by gigapig, -
- 3 replies
- 240 views
Hi all as title says Can not figure out how to map my pad with this I know to press control shift 1 but then what it's confusing me feel like pulling my hair out lol
Last reply by gigapig, -
- 12 replies
- 492 views
Hi all as title says I made a few tweeks in my mame ini After finding what I want in the slider but I add them to the ini but they won't save any ideas
Last reply by Beardedgamer23, -
- 2 replies
- 347 views
I can't seem to get sega model 2 emulator nebula working no matter what I do.... when I click on the game through hyperspin a little black box pops up for a split second and disapears and it stays in hyperspin as if nothing happened Is there a better emulator for model 2 or any suggestions
Last reply by rexryan, -
- 0 replies
- 246 views
Hi everyone! I recently setup Mupen64plus as my n64 emulator. Because of my arcade cabinet layout and key config, I need to map the "P" key to the Z button, but apparently the p key pauses the emulation. I can't find anywhere where I can disable this. Can anyone please help me remove the pause functionality for the p key?
Last reply by esoteric, -
- 0 replies
- 282 views
Do you know where I might be able to find the vector files to any of the Multicade vector artwork?
Last reply by BlueGoblin, -
- 7 replies
- 402 views
As title says when I try open this outside hyperspin it's just a black screen No option to edit controls like I did before with my xbox 360 pad I just want to edit the controller any help as this is my last system to set up
Last reply by DrMaxwell, -
- 4 replies
- 336 views
Hey guys! I'm running 0.159 with HLSL and RocketLauncher. I'm having some strange inconsistencies when launching certain games, for example Gauntlet rev.14. At times it will launch with bezel art that has the MAME logo on each side, and sometimes it's will be just blue blocks (kinda tetris-esque). Also, and this happens every time, when the game launches it is initially windowed (with another window visible behind it), then the bezel art comes in after a slight delay. Mouse cursor is also visible. Any ideas what may cause this? Other games seem to work just fine, and the behavior seems completely random. Thanks in advance!
Last reply by theundeadelvis, -
- 10 replies
- 554 views
now please don't bash me but im using the older hyperlaunch on a system that already works and don't want to update as the last time I did everything stopped running, I would however like to add Sega Model 3 to my hyperspin wheel and that means adding Supermodel script to the hyperlaunch.ahk file - can someone please show me what needs to go into this script, I have tried googling it, but it only finds the supermodel.ahk file should look similar to this: ;**********************************SEGA SATURN*********************************** else if (systemName = "Sega Saturn" && executable = "SSF.exe") { RunWait, %DAEMONTOOLS% -mount 0`,"%romPath%%romName%%romE…
Last reply by urbangangsta101, -
- 16 replies
- 620 views
Hello guys, Hope you can help me on that; the situation is, I normally start Windows and Hyperspin at 640x480. But then I would like to switch to lower resolution to play certain emulators without interlacing (ie zsnes, kfusion). I think this should be pretty easy to achieve, however I am running on issues: > I call to 640x288.exe before running the emulator, and after exiting, I call 640x480.exe The emulator starts perfectly, switches to resolution as expected, however when I exit the emulator in Hyperspin, it does not gracefully exit back to 640x480. Instead, I get a sort of split screen (see screenshot), HS does not go back to full screen at 640x480. Could som…
Last reply by Dime333, -
- 11 replies
- 482 views
New to forums and I did a search on you tube and here but couldn't find a soloution. I got Hyperspin working with MAME only for now as I wanted to add one emulator at a time to learn how it works etc. I adjusted the list via Don's tools and it launches and runs the games great. I went to EmuMovies and got all the game snaps and 11 videos (mp4's) for MAME but im guessing I either got the wrong ones or put them in the wrong section because all I get is a black screen now when I select on the games list in Hyprspin. I put the png screen shots in C:\Hyperspin\Media\MAME\Themes and I put the videos in C:\Hyperspin\Media\MAME\Video. Any help on what I thought would be the …
Last reply by wingsta96, -
- 3 replies
- 310 views
Im trying to make an XML file for Playstation 2.
Last reply by relic, -
- 1 reply
- 306 views
Hi lads, I currently have an issue with Fusion, when launching within Hyperspin. If I hit right +button 3/4 on my Player 2 (think the keyboard mapping are gqs) fusion minimizes and screen returns to Hyperspin wheel. (Fusion is still running in the background) I know its not an emulator issue as its fine on its own, any idea's lads? Thanks as always,
Last reply by djsim, -
- 6 replies
- 418 views
So..i go to start up pinball fx2 through hyperspin after adding some new tables and before i can load a table i get a multiplayer menu come up... is there any way of bypassing or removing it?
Last reply by bobmoo79, -
- 6 replies
- 1.1k views
Hi all, Apologies for asking for help so soon after joining, but I have followed the install guide thoroughly and cannot see where I am going wrong so hope someone can help me please? When running HyperLaunchHQ the only system showing is GLOBAL - even if I try to manually add a new one. After looking around the program, it seems to be because hyperlaunch is looking for a systems.ini file in this location: Hyperspin\HyperLaunch\HyperLaunchHQ\Databases\Systems.xml However, this location was synchronised using GIT and the only file inside that folder is a placeholder. The install guide made no mention of creating or downloading a systems.xml file, so either I am missing s…
Last reply by SIMPLYAUSTIN,
-
Popular Contributors
