Support
Having problems with HyperSpin? You've come to the right place!
4,032 topics in this forum
-
- 10 replies
- 469 views
Hi guys, i have ePsxe working both inside and outside of HS as long as i do not select "rom only" in HQ. As soon as i select this it will not go to psx sub wheel, but if i leave it unchecked it will. Games can be played (as long as i have them) but i want to tidy up. What is going on? Thanks, Dave
Last reply by xavielson, -
- 4 replies
- 323 views
I know there's probably something stupid I'm not seeing, but I'm using an xarcade tankstick. Setting up controls for shooter games is that done in my mame emulator or inside hyperlaunch hq somewhere. I know stupid question but I've never been able to get the games going, they launch fine but my joystick doesn't control it. Thanks!!
Last reply by gigapig, -
- 1 reply
- 222 views
So I have a control panel that's using hardware (USB adapter) which shows in Windows (xp64) as PS® Gamepad Adapter Buttons and joysticks register and can be configured in - when testing in joy.cpl - in HyperLaunch HQ by capturing hot keys - in HyperHQ by setting joystick ID and adding controller presses in the UI. However, when I fire up Hyperspin I get NO input from P1 or P2 on my control panel. Screenshots of my settings attached if it helps... Keyboard still works fine though. Haven't tried setting up any emulators until I at least get HS working. What am I missing?????
Last reply by kcorcoran, -
- 7 replies
- 587 views
When I tested it with HyperLaunch the game started up just fine, but when I try it on HyperSpin it gives me the error, "Cannot Find HyperLaunch.exe". Here is my settings.ini [Main] Menu_Mode=single Single_Mode_Name = MAME Enable_Exit_Menu = true Enable_Exit = true Version = 0.8.0.0 Last_System=MAME [Resolution] FullScreen = true Width = 1024 Height = 768 ColorDepth = 32 Refreshrate = 0 DirectDraw = true [backgrounds] Animated = true UseAdvanced = true [introVideo] Use_Intro = true Stop_On_Keypress = true [sound] Master_Volume …
Last reply by Somsai, -
- 1 reply
- 242 views
Everytime I try to edit a theme using HyperTheme, the video doesn't show in the editor screeen. And when I save my work the video is gone from the template and it is not visible in HyperSpin... I've noticed that I can't add videos except FLV format, but all my videos are in mp4 format... I'm using HT 1.1 and updated EXE 1.1.5 downloaded from this site. Could you help me, please?
Last reply by Konamito, -
- 1 reply
- 209 views
Can anyone tell me where I might be able to find this audio component for my Hyperspin machine. This one isnt function properly.
Last reply by BlueGoblin, -
- 2 replies
- 330 views
I thought I'd get some xml's of HyperList, but it gives me security warnings in both chrome and firefox. I checked the other links under the HyperApps tab as well and the HyperLaunch link seems to be affected as well.
Last reply by baddeolv, -
- 2 replies
- 278 views
Hi, i have the following problem. My SNK Neo Geo wheel isn't showing instead the Sega Game Gear pops on this position. My mainmenu.xml is as follows: <menu> <game name="MAME"/> <game name="Atari 5200"/> <game name="Daphne"/> <game name="Nintendo Entertainment System"/> <game name="Super Nintendo Entertainment System"/> <game name="Nintendo 64"/> <game name="Sega Master System"/> <game name="Sega Genesis"/> <game name="Sega CD"/> <game name="Sega 32X"/> <game name="Sega Dreamcast"/> <game name="Sega Model 2"/> <game name="NEC TurboGrafx-16"/> <game name="SNK Neo Geo"/&…
Last reply by rikoos, -
- 1 reply
- 323 views
Hi guys, im kinda new to this forum and Hyperspin in general, i actually have Hyperspin 1.2.0 and HyperLaunch 1.1.9.0 installed, (almost) everything is running smootlywith hypersplash too, now i use the frontend on a pc, but soon im gonna build a "mame"cab, so ill change the controller, from keyboard to joystick and stuff. I would like also to add some steam games,and from what i understeand, my actual version of HS, doesnt allow me to install pclauncher, (correct me if im wrong) Is there a safe way to follow,in order to update HS and HL without risk of loose settings etc.? Once i will have installed HyperlaunchHQ is everything (eg. Settinings, emulators) allready…
Last reply by dark13, -
- 2 replies
- 346 views
Hey guys I'm having another problem with my hyperspin program. All my roms are zipped and they work fine on all my emulators. For most of my Sega systems im using the Fusion emulator. fusion plays all my sega Genesis and game gear roms perfectly as zipped files. But when I try to play my master system roms this erros comes up (will add picture as attatchment) can someone tell me what I need to do?? Thanks!!
Last reply by rexryan, -
- 8 replies
- 557 views
I was fumbling through trying to change the the ESC button within a single emulator. The ESC button is at the top of my panel (mapped by IPAC) and is kind of in the way when we play Golden Tee (Drunken buddies like to follow through with their shot for some reason) So I'd like to change the escape button to be F1 and mapped to a special button on the side (I put some spare buttons there) or anything but ESC as Hyperspin closes the EMU. 2nd question, when cycling through games, is there any way to avoid hte Hyperspin graphics like the flying start and full screen Hyperspin logo? It seems to slow down my PC.
Last reply by Silverback, -
- 9 replies
- 765 views
I have been having some problems with running different emulators on HyperSpin when they are connected to a TV rather than on my computer, and I was wondering if anyone had advice regarding how to fix these problems that I suspect many people have encountered. In the Atari 2600 emulator Stella, I have noticed that when I exit a game to return to HyperSpin the resolution is changed, forcing much of the HyperSpin window off of the screen. In the NES emulator Nestopia, I have noticed that the emulator will load games on my computer screen rather than the TV screen when started through HyperSpin. Thank you!
Last reply by rrobledo, -
- 12 replies
- 734 views
hey guys! ive had hypersppin set up on my laptop but now i'm trying to convert everything over to my Desktop. it worked fine on my laptop (windows 7) but now that i have it all converted to my desktop (windows XP), when i click on the hyperlaunch program i get a black screen with this... "Error loading the DLL: C:\Hyperspin\HyperLaunch\ModuleExtensions\HyperLaunch.dll"...and also when i go to start HyperLaunchHQ, ill get this..."The application failed to initialize properly (0xc0000135). Click on OK to terminate"....can someone enlighten me on what i need to do to fix this??? thanks in advance!
Last reply by aliens8us, -
- 14 replies
- 583 views
Hello, I seen the write up on ALG but nothing on my issue, i am getting a error message when i start any of the games from within the FE. It says: Could not initialize video display:No video mode large enough for 1440X900 Any advise on fixing the issue? Thanks
Last reply by rfancella, -
- 2 replies
- 371 views
So just set up fusion for sega cd games run fine apart from bad sound in hlhq the sound is bad but out side of it its fine any advice?
Last reply by sonicboom88, -
- 11 replies
- 806 views
well i got this cabinet built by this guy he came to my house and he built it.. it was working find when u play one player but when u play 2players it keeps beeping and freezing and beeping making it impossible to play , i called the guy that built this for me but he said he has no idea what to do , now he won't even answer calls.. i have a arcade guy that said my problem is my ram , and another guy saying it is my processor,, but both of them guys never had a cabinet with hyper spin , so if there is some one out there with a solution please guide me ,,,
Last reply by Gothicplsur, -
- 8 replies
- 551 views
I cannot get this program to work for me. I also picked up a X-Arcade Tankstick + Trackball but it is not being fully recognized. So, is anyone interested in being paid to remote in to my system and fixing the issues (unless you are local to the LA area)? Thanks
Last reply by baddeolv, -
- 5 replies
- 766 views
The error I get is .zip is not supported and I have it listed in the module. I have included the log, its long though Code: BuildScript - Module: MEmu = Demul MEmuV = v0.5.8.2 MURL = [url]http://demul.emulation64.com/[/url] MAuthor = djvj MVersion = 2.0.3 MCRC = EFEE7501 iCRC = F43FB746 mId = 635211874656892855 MSystem = "Sammy Atomiswave","Sega Dreamcast","Sega Naomi","Gaelco" ;---------------------------------------------------------------------------- ; Notes: ; Required - control and nvram files can be found in my user dir on the FTP at /Upload Here/djvj/Sega Naomi\Emulators. Additonal instructions from my orignal HL1.0 script at [url]http://www.hyperspin-fe.co…
Last reply by jcrowley30, -
- 2 replies
- 315 views
I can usually figure things out but I spent all day trying to fix this any help would be great. I cannot get ledblinky to load for casual games or visual pinball...I have it working for dang near everything else. I'm wondering if something is in ahk causing it to not load? I did get vp to load up with my settings in ledblinky a couple of times but not consistantly so maybe add a delay? Any ideas? The casual games is not working at all with ledblinky for some reason
Last reply by randr, -
- 5 replies
- 379 views
Hi guys I am still new to all this and only starting to understand small parts of the new language, as title says! Any help would be much appreciated.
Last reply by eezetee, -
- 4 replies
- 432 views
hello, i have not used hyperspin in a while and decided to build one again. I am using a asrock 880pro motherboard, 2 gb ram, 1gb geforce 210 graphic card, and a 2.8ghz pentium dual core chip. It is very choppy from the video entry all the way till you play a game? i have removed all transition, lowerd the quility and slowed the wheel down. in the past i have used hardware worse then this stuff with no problems. i can not work it out. i have also changed the cpu to a 2.66 dual core and changed the graphics card to a 8800gts, same problem. the hard drives are 2 500gb sata drives? i'm using windows 7, it was on xp and had the same choppy look. (the sound works fine) thank…
Last reply by Metalciaf, -
- 1 reply
- 587 views
Hi guys, I have looked everywhere and cannot find a solution to setting up the Neo Geo Bios for MAME, I have tried both of these: http://www.hyperspin-fe.com/forum/showthread.php?35771-MAME-153-NEO-GEO-Uni-Bios&highlight=uni-bios_2_3 http://www.hyperspin-fe.com/forum/showthread.php?5451-NeoGeo-MVS-vs-AES&highlight=uni-bios_2_3 but none of the suggestions have helped. I am using MAME 0154.
Last reply by bondy, -
- 4 replies
- 748 views
Ive gone through the installation guide and was pretty sure I did everything right. But now getting NO EXE PATH DEFINED error. And for the life of me can't figure out why Ive checked and everything seems to be pointing to the right place. Can anyone help me out please. I hate to ask for help, cause Im sure its something stupid. But I really like the idea of this app and would like to get it running. Thanks
Last reply by wizshaw, -
- 0 replies
- 260 views
Just wondering what this should be set at. For the moment im using a 17in laptop. Thanks
Last reply by snstay, -
- 3 replies
- 355 views
I inserted a new emulator into the Hyperspin wheel, and downloaded the appropriate theme for it from the DL section. However, there is no animation, sounds, graphics shown when the system is selected from the Hyperspin wheel. Am I missing something here?
Last reply by Kenny88,
