Support
Having problems with HyperSpin? You've come to the right place!
4,034 topics in this forum
-
- 0 replies
- 110 views
hi guys i am looking for sega megadrive japan video snaps. do you know where to find them if they exist
Last reply by juicelee, -
- 2 replies
- 114 views
I'm on the newest update, using the 16:9 theme on the downloads section and mp4's from emumovies anyone else experience this? I also removed and re added with HQ to see if that would solve anything and nothing. Thanks. Also my letters are not showing when i skip.. i've tried renaming lower and upper case and nothing.
Last reply by Creezz67, -
- 1 reply
- 123 views
hi guys , can someone tell me how to get cemu full screen, i am getting this, 9see below) using gigas latest build for hyperspin/rocket launcher to run this . thanks
Last reply by juicelee, -
- 0 replies
- 92 views
So I have had my Hyperspin setup working for awhile. Yesterday I hooked up a new spinner and enabled it and that was fine, so I don't know if this was related at all or not. The system settings were suddenly changed in HyperHQ. 1. The intro video and stop intro on keypress were unchecked 2. The Controls tab was completely blanked. 3. I was no longer able to exit any game. I fixed the first two issues just by changing them back. However issue 3 I can not fix. When I am in the main menus Esc works just as it should, I can go into a wheel like mame, look around, hit Esc and it takes me back out to main menu. I can hit Esc in the main menu a…
Last reply by Justh8me, -
- 1 reply
- 111 views
First Follow Big Blue Frontends Video https://www.youtube.com/watch?v=ppy6INgXbJM Then Follow Then Create a HyperSpin.bat with (start D:\Arcade\HyperSpin.exe) file like the one in my vid and copy it to D:\Arcade Folder reg edit the shell to (D:\Arcade\HyperSpin.bat) Checkout My Vid : https://www.youtube.com/watch?v=FkWEGjP6Fec&lc=z22yfxvgjkn3i5ssmacdp434t21hhqcvekoiigniwblw03c010c Also I have not tested but this should work on all versons of Windows 10, and you might be able to skip Big Blue Frontends TUT and use Instant Sheller (New Version) then my .…
Last reply by dark13, -
So the title says it. Model2 in rocketlauncher works perfectly fine, newest 1.1 version in latest rocketlauncher. 1.2.0.1. Also the latest hyperspin and, it doesn't load near every time. Just a small black window in the upper left corner, in which I can hear the game sound, and it goes back to the hyperspin menu. I've tried many different versions and reinstallations of model2, going back to .9. I have also tried the regular emulator, and the multi-cpu emulator, and they both work in rocketlauncher, and both do not work properly in hyperspin- same results. Here and there it will open correctly, but most times it won't. Doesn't matter the game. Also every …
Last reply by gigapig, -
Are there any hyperspin xml files for controller support,ie which wii/wiiware games are wiimote only? I'd like to separate these games or attach a controller icon to the boxart in my setup...but I'm yet to come across any wii/wiiware xml lists with controller support...or perhaps the xml could be modified <controller> wiimote,gamecube</controller>
Last reply by Aorin, -
- 1 reply
- 110 views
Hi everyone, I have an xtension controller and cabinet that I purchased from Rec Room Masters. I followed tutorials and installed Hyperspin + RocketLauncher. Everything is working great except for a couple of small problems with mapping. I'm attaching a screenshot of my hyperHQ mappings. The controller is ultramart mini pac. When I open notepad and press the controller 2 buttons, I receive asqwikjl (in that order from top left to right). I assume one issue is "Q" in HyperHQ is set to exit. And of course when that button is pressed in a game, it exits. Is the solution to this as simple as changing the HyperHQ mapping to something different and random…
Last reply by 32assassin, -
- 4 replies
- 154 views
hi guys i am having a problem with retroarch after updating it ,the problem is this,(see below) just updaed to version 1.7.6 and my screen looking like this, is there a way to change resolution, i had it set on 1080p before update, thanks, i am updating hyperspin after 4 years so anything changed or if there are better shaders to use, i had crt curvture i think, what is the best shader to use ,or it do it depend on console.
Last reply by juicelee, -
- 6 replies
- 141 views
Hi all, I'm running a Hyperspin install from 2012. I have no idea where to see version numbers in HS, but my cabinet is old. I recently decided to run Playstation games in it. I had to edit the script to allow for ePSXe mine would originally only recognize psxfin. Now I'm stuck with none of my artwork showing up properly (also, it doesn't look like emumovies does FLV video anymore which is what I have to have). Is it possible to update some of Hyperspin without losing the functionality of what I already have? Or am I best left frozen in time? Hyperlaunch seems to work fine for everything so I can't see needing Rocket Launch, but I really wish I could nail down what was go…
Last reply by callmesnake1977, -
- 4 replies
- 144 views
I am trying to hide games with multiple discs from my wheel. In the xml where it says <enabled><Yes</enabled> I have changed it to <enabled><No</enabled> but the games are still showing on the wheel. Any ideas what I should do? Thank you.
Last reply by braap, -
- 6 replies
- 159 views
hi guys i wondered if anyone can help, i recently updated my hyperspin and rocket launcher to the latest versions. i am getting this message(see below pic) every game runs fine from rocket launcher but not hyperspin. i know i need to change the path it asking for but cant find where to change it. thanks guys.
Last reply by juicelee, -
- 3 replies
- 157 views
Hi Guys. I am in the process of getting my HS up and running. I am looking to use a PS4 controller and prefer the feeling of the controls. Is there anything else i need other than the controller for it to work under windows and HS? Do i need any extra dongles? Thanks in advance.
Last reply by Aorin, -
Hello! Rebuilding the software portion of my cab including a W10 upgrade, and now having some issues I didn't previously have in Win7. I did d/l and install 1.5.1 so it's not that. Issue #1: After the intro video there is about a 5-10 second delay where nothing I do works and the theme doesn't load (up/down for example to scroll) but then after that delay all of the buttons/directionals I hit happen and the theme loads. This also happens after entering a new wheel (Main Wheel into NES games for example) or going up a wheel level (Leaving NES games and going back to the main wheel). Issue #2: When loading a game (even like a small NES 7z file), it takes roughl…
Last reply by Geego, -
-
- 1 reply
- 117 views
I was able to get the game running but it does not have any sound at all. Currently using Mame 206 and Hyperspin 1.51. I've tried using MameUIFX to adjust the sound settings but still nothing. I've seen numerous threads about people having issues with the sound but none that say it doesn't work at all. Please help? Thanks in advance
Last reply by seanjohn23, -
- 1 follower
- 4 replies
- 146 views
Hi Guys. Does anyone have a list of settings to turn on or turn off on Windows 10 so that HS works more smoothly? Thanks in advance
Last reply by dark13, -
- 1 reply
- 100 views
Hi guys. is anyone running HS under Windows Server 2016?
Last reply by dark13, -
- 1 follower
- 2 replies
- 116 views
Hello all, The trackball on Golden Tee is crazy sensitive. Barely move the trackball and its as though i made a full backswing. So in doing research it looks like the place to adjust this is through "tab" and then analog controls. The problem is that once i'm into the analog controls i can adjust the sensitivity. can't adjust anything in that menu. Has anyone come across this? Any idea's on how to adjust the sensitivity? thanks in advance!
Last reply by ninja2bceen, -
- 1 reply
- 94 views
I decided to add a wheel for PC games on my arcade cab, everything was working fine with games launching through rocketlauncher using the PCLauncher module...except when it came time to add Crysis...everytime the game would launch it would crash at the "Crytek" intro, you would hear a Hyperspin error sound, the mouse cursor would appear and hover over the "Crytek" logo, and then it would stall before collapsing into a windowed view of the game...this is combined with a bunch of focus issues. BUT when i create a main menu wheel to just launch the exe without hyperlaunch/rocketlauncher, it launches without any issues at all. How can I get Crysis to be on my PC Games wheel…
Last reply by tonythewrench, -
- 1 reply
- 119 views
I bought a pre configured hyperspin drive (I know it was a big mistake). The problem I am having is that I cant get the xbox 360 controller to work. When hyperspin is launched the control mapper keeps popping up. Is this normal? No matter if I execute it or not the controller does not work. The controller was tested and working. Could anyone please help me out.Thanks
Last reply by 32assassin, -
AHK script files for download! (not sure I've posted this in the right place though) Thanks to Bubs and one of the guys on the ahk forum, these two scripts will put an end to the video sound problem where the sounds play in the background after the game has started (Window.ahk) if you wiggle a joystick as its loading etc. A problem that has annoyed me for ages! Drop the "Window.ahk" into the rocketlauncher folder - Lib / Classes / Util / uni and replace the one that's there. You can always backup the original one. The HoldEnter.ahk file is a script that holds down the "ENTER" key for 5 seconds. This is extr…
Last reply by Martin0037, -
-
Genre Wheel
by braap- 10 replies
- 215 views
I recently started setting up genre wheels. When I go into a genre and hit escape to back out I get backed out to the main menu. How can I show all games again rather than just the genre that i selected?
Last reply by DomusdelCapo, -
- 1 follower
- 13 replies
- 359 views
Hi Gang, Here goes my first attempt at Hyperspin! There are going to be lots more posts about my build so I wanted to give you all fair warning A bit of info on me and my build. Im from Australia, NSW and I'm a full time shift worker and I' looking to build my first cabinet. As I'm pushed for time and tools I'm buying a flat pack cabinet kit that will be modified to have the features I want in it. (Dynamic Marquee, 32" widescreen monitor for gaming on, casters for ease of mobility with leveling feet, cut out for light bar for the light guns the ultimarc ones.) Currently my controls are mounted in a timber box so I can play around with setting up controls and ma…
Last reply by ninja2bceen, -
- 5 replies
- 150 views
Salve a tutti, Sono nuovo membro. Ho da tre anni un cabinet NAOMI UNIVERSAL con installato un computer con vari emulatori ( l'ho comprato gia fatto), in questi giorni ho deciso di aggiornarlo con una scheda video più potente,. Domanda : come faccio uscire da Hyperspin con la tastiera ? Quale la combinazionedi tasti ? Grazie a tutti per il vostro aiuto
Last reply by DomusdelCapo, -
- 4 replies
- 144 views
I'm having trouble getting my hyperspin to do a intro video. I have Intro Video enabled in Hyper HQ, and I have the default hyperspin load video in Arcade (D:)> Arcade > Media > Frontend > Video folder. It is named intro.flv. When I start hyperspin, it just goes straight to the wheel. I've tried getting it to work for a week and ran out of options. Any suggestions?
Last reply by Braves5,
-
Popular Contributors
