Support
Having problems with HyperSpin? You've come to the right place!
4,041 topics in this forum
-
- 4 replies
- 194 views
Hello! I have recently got back into my Hyperspin/arcade project after a year of just not having enough time. My setup was slow when I had multiple systems (Mame, NES, SNES, and more), so I decided to just make an arcade system with only Mame, and it's very quick now. But since I have removed all those other systems, now my system Wheel is just a bunch of Mame logos. Is there a way to make it so I just have 1 Mame logo, that I can choose? Thanks!
Last reply by ninja2bceen, -
- 2 replies
- 173 views
Okay... so I used the Startup Script that's provided elsewhere on this site to get the Hyperspin Menu to work with my x360 controller. It's been working fine. Then I added WIIMote controllers to my computer through Bluetooth so I can play WII games through Dolphin. Now my menu navigation is all screwed up. When I get in to Hyperspin, the menus uncontrollably start scrolling, and neither the X360 inputs nor the keyboard inputs work. Even using Task Manager to exit Hyperspin and taking the batteries out of the WIIMotes doesn't help when I restart Hyperspin. I have to restart the computer without the WIIMotes turned on to get Hyperspin to work again. Does anyo…
Last reply by bacchuspup, -
- 8 replies
- 238 views
I have recently downloaded hyperspin and rocket launcher and followed several youtube videos to make sure everything is set up properly. When I load HyperSpin and select a ROM I wont to play it does nothing. The Start menu goes away for a second and that's it. I've lauched the games in the rom separately, test ran them in RocketLauncherUI with no problems. All the games have been audited and renamed properly. I've spent days trying to figure this out and I am officially stuck. Any suggestions/help would be amazing! I have attached my log from HyperSpin for someone smarter than me to locate the problem log.txt
Last reply by Avar, -
- 3 followers
- 16 replies
- 371 views
Hey guys, so I downloaded a huge hyperspin torrent, about 800gbs unzipped. Could use some help in a few areas, when I click hyperlaunh in the folder it just says it can't find the xml but it's there, also I have gotten a few games to work by going into settings and changing paths to new drive "F" the game will work from hyperspin. Now if I take all the same files and drop them onto a new drive and toss it in a computer with the same drive name "F" I open hyperspin and try to click on a system then it just resets itself back to first item in system list it won't launch the rom list. Sorry if im jumping all over the place, thanks for any help and tips.
Last reply by adamg, -
- 14 replies
- 252 views
Hello, I have HyperSpin v1.4 installed with RL running on Win7Pro 64bit. The problem I'm having is when I open HS, select Mame and choose any game a HS window comes up saying 'error cannot find d:\utilities\joytokey\joytokey.exe'. It stops me from getting into the game. I don't use any other consoles/emulators at this time. Mame works fine on its own. Not sure why this error is coming up. I don't want to configure JoyToKey or Xpadder stuff, although in RLUI it appears to be enabled with keymapper. In RLUI >> General Settings > Global > Third Party, I do see JoyToKey and Xpadder Paths listed to the error path, although those paths for some reason…
Last reply by Avar, -
- 1 follower
- 10 replies
- 343 views
Hi Guys, I am trying to run the new PGM2 roms but I am having difficulty getting them to work, kov2nl, kov3, orleg2 I currently use MAMEUIFX64 0.154 No Nag Save Hiscore DXinput, but im guessing its not going to run on this? I would like to find a similar build to get the files working in my collection, Anyone got them working? Also have there been any other good mame dumps recently? Best, P
Last reply by danielferr, -
- 0 replies
- 197 views
I cant seem to find any info on setting up doujin games in hyperspin.
Last reply by krislepz, -
- 1 follower
- 2 replies
- 206 views
Hi! I´m a recent fan of Hyperspin, and so far have put about 20 hours into getting stuff working. Not quite there yet, unfortunately I have the HFSBOX15K setup on my windows 10 PC (eventually I want it on my Shield Android TV, but first I just want to get something working on PC). Without ANY modifications in any of the settings, I get "Cannot find launcher" error message when starting any game for any system (all else is working in Hyperspin, e.g. all art, wheels, etc.). I have double-checked multiple times that the RocketLauncher.exe file is indeed where all file paths are pointing to, and i just cant understand why it cant launch it. It seems to me…
Last reply by lovebus5, -
- 1 follower
- 8 replies
- 198 views
Hi, apologies beforehand if this isn't worded well, I'm new to this sorry. Im trying to set up my bartop arcade, but for the life of me I can't get the arcade sticks to work in games. i can navigate hyperspins menus and select games etc, no problems there, it's when I've launched a game that I can't move characters? ill use Aladdin as an example on fusion. I can throw apples, jump and swing my sword, but I can't move Aladdin around. Ive gone into fusion.exe and into the controller config, and tried doing the detection (if that's what it's called) with the sticks, and it responds to me by going through the options (i.e., press up, down, left, right, a…
Last reply by veaseyj, -
- 3 replies
- 201 views
i've recently installed a couple of pc games into my setup but when i try to launch them, they open up for about a second or so and then auto minimise. i can get to the game by alt tabbing with my keyboard though. i've read through some solutions but am unable to find the right fix for it. This ONLY happens with PC GAMES and not when im trying to launch mame or ps2 games etc. EDIT : ok this only happens with my ultra street fighter 4 and not my ultimate marvel vs capcom 3 (btw i only have 2 pc games lol). i read somewhere it might be a resolution thing i'm gonna try that
Last reply by Hawkeye71, -
- 0 replies
- 185 views
I Have just purchased the xtension emulator pro controller and I'm having the hardest time in rocket launcher to key map it. Can someone please point me in the right direction on which program is easiest to do that
Last reply by Pistal2k, -
- 1 reply
- 215 views
I'm using RetroArch with rocketlauncher/Hyperspin. Every other Retroarch core is working beautifully, but for whatever reason the Virtual Boy core is not passing the controls over, so all i get is the "Please read instructions screen" when i open a VB game. If i go directly to Retroarch and load the game and core..it works perfect, controls are fine. Just not through Rocketlauncher or Hyperspin. Any ideas? I'm kinda lost. I'm using xbox 360 wireless controllers. I'm not using any 3rd party controller software like joytokey
Last reply by mxstar1, -
- 0 replies
- 144 views
Gm wie kan mij helpen om hyperspin te instaleren op mijn pc op afstand via teamvieuwer krijg het namelijk niet voor elkaar
Last reply by micheldoeven, -
- 1 follower
- 2 replies
- 174 views
Trackball in Mame is getting "select position to load from" . All other functions are working fine. Trackball works as a mouse outside of hyperspin with no issues. Any suggestions? This is the only thing left to finish this cabinet
Last reply by keithhensley, -
- 0 replies
- 177 views
Hello, got an issue running some mame games in Hyperspin. I have two mame versions running several games and everything runs good, I'm not running HL or RL the emulators run directly from HS, the problem is when I run some games like Killer Instinct, because de games take to long to load HS looses focus from mame and starts de video preview sounds in the background, so I'm left with the mame game on the screen with no control and the HS video preview sounds in the background. Thank you.
Last reply by pulos, -
- 1 follower
- 9 replies
- 224 views
So I was just updating my system and came upon the Gigapig complete system builds with everything already setup so I wanted to give it a try well now it won't run any games except Mame and it seems to have some thing to do with this error. I have tried Retro Arch on its own and it ran with no issue. I also made sure 7z was enabled and turned off fade. ScriptError - There was an error waiting for the window "RetroArch ahk_class RetroArch". Please check you have the correct version emulator installed for this module, followed any notes in the module, and have this emulator working outside your Frontend first. Also turn off Fade to see if you are hiding your problem. …
Last reply by gigapig, -
- 1 reply
- 177 views
I'm trying to move hyperspin to a new drive with a different drive letter.. Unfortunately I lose all my wheels :/ anyone know how to do this??? hdd crashed so I replaced it with a 3 tb and a dedicated 250gb for windows
Last reply by jfp, -
- 4 replies
- 227 views
JUst wanted to ask a question without sounding too complicated. This is the example i will give if I try running 1943 in Hyperspin i get errors like bme01.12d and forces me out of that game, and then I will run another game 1942 and it runs perfectly. And now to really complicate things if I run this ROM through Mame emulator its fine runs as it should. Also, I use mame 1.53 Any help would be appreciated thanks
Last reply by jfprice30, -
- 4 replies
- 210 views
I've been at this for days and need help. I select a system on the main wheel and enter it. All wheel artwork is showing. The last rom played is showing with the artwork and video playing. As I move through the roms in the selected system no artwork or video is playing or shown. If i exit back to main wheel, then go back in artwork and video works for the first rom. This problem is happening in all systems in the main wheel (about 30 systems). As I go back and forward, All the media is working. Has anyone had this problem.??? Please Help Thanks
Last reply by Gpd265, -
- 2 followers
- 5 replies
- 200 views
Hi there, I have recently purchased a full Hyperspin Arcade system in a full arcade cabinet from a company i wish to not say close to $3000 worth. I was playing it last week for 2 hours switched it off. Came back the next day and the screen says No Signal. I have changed all cables and found out it is the PC itself that is faulty. I have brought my own pc down to the arcade plugged it in and it works. I have sent back the pc to the supplier but no gaurantee its will be back before my big opening day. They are not offering any support at all. So what i have done is this. I have got another hard drive and copied everything from the …
Last reply by griffin518, -
- 0 replies
- 214 views
hi im setting up controls for games in my hyperspin setup and im having a problem with xpadder. on most games that require it im using x360ce to make my controls look like an xbox controller and that works great. but a few games along with hyperspin require keystrokes i tried xpadder but all the effects are global so one game works but then it messes up my controls for all the other games in my cabinet. is there a way to use xpadder for specific games and hyperspin control then shut off automatic when i choose a different game??? sidebar im also trying to use xpadder to bind mouse settings to my joystick for stars wars trilogy in the supermodel emu does anybody know how t…
Last reply by bigcam, -
- 1 reply
- 171 views
Hi there, Am fairly new ot the scene... discovered this week that Hyperspin and its amazing. Anyhow, I've started working on my version of it using tutorial on youtube... fairly easy... I've setup Sega Saturn on hyperspin, video and rom and all works perfectly, tried all my games and it worked 1st shot. So I figured I'd move onto the Dreamcast console now... did Everything I did with the saturn, except... for Dreamcast, I used that video walkthrough to help: https://www.youtube.com/watch?v=xFJ2qLtDdHI and even used the pack files to base myself on it... like editing the database, so I only get my games, I dont want the whole DC library, juste de han…
Last reply by teftef, -
- 0 replies
- 165 views
Hi, I have used HyperSpin on and off for a long time (All on the same machine) and I recently used the hypersync program (Latest version) to download the full nes video snap set with my games, and for some reason alot of them dont show sound when in hyperspin? they all work if i open them with vlc from the media folder where they saved to? Never had this before, any ideas would be great!
Last reply by zetecsjoe, -
- 1 follower
- 1 reply
- 227 views
Hi all, I am trying to make Hyperspin main menu work with my XBox controller. All the games work fine and even HyperHQ sees it and configures it correctly when I set it up there. Lets me map keys where ever I want to finds the ID, etc. Yet when I run hyperlaunch it doesn't see the joystick. If I look in the log file I do see the following 05:38:25 PM | HyperSpin Started 05:38:25 PM | Going windowed mode 05:38:25 PM | Checking for updates 05:38:25 PM | Update Check Complete 05:38:25 PM | Startup program unavailable 05:38:25 PM | Playing intro video 05:38:28 PM | Error intializing joysticks 05:38:28 PM | M…
Last reply by Aorin, -
- 1 reply
- 223 views
Hi All, Does anyone have a list of the fonts used for Style 1 -> Style 4? Or even just Style 3? Looking to create some special work and was hoping to match the font used with style 3.
Last reply by Bungles,
-
Popular Contributors
