Support
Having problems with HyperSpin? You've come to the right place!
4,041 topics in this forum
-
- 1 follower
- 3 replies
- 200 views
I'm using the Xtension "Emulator Edition" two-player board with trackball. The board seems to work just fine. And in fact, so does the trackball, outside of HyperSpin on my windows desktop. But as soon as I tick the use trackball option in Hyperspin HQ, things go bad. If I do that, and then launch HyperSpin, the wheel goes crazy. It just spins at like 1000 RPM. Totally out of control, to the point that I have to force the application closed. For what it matters, and just for extra info, I kept the sensitivity to 90%, just as HS HQ stock setting... would lowering the sensitivity help? Or is it another issue all together? It feels a bit sluggish at 90% as i…
Last reply by gigapig, -
- 0 replies
- 165 views
As the title states. Is it possible after selecting a game in hyperspin that it doesn't register input from key presses for a set amount of time? I am not using the fade function for some games so that is not a option.
Last reply by Sheep190, -
- 0 replies
- 170 views
Help please, I am in a battle with HS! Problem: I launch HS 1.4 and have no control of the menu from the joysticks (initially) but if I go out to JOYTOKEY and simply highlight any valid profile that has the correct ke mappings and then go back over to the HS instance that is still running I gain control but only until I navigate to a different sub-menu/emulator then I have to do the same thing again to regain control. I followed the tuts from HS, Simply Austin, and Game room Solutions to the Nth degree and triple checked everything but something is not right. My Joytokey profiles include: Hyperspin, RocketLauncher, and Profile 1 (All have the i…
Last reply by catslovedogs, -
- 0 replies
- 186 views
When I run roms either through rocketlauncher/hyperspin/emulator I get no sound; anyone know how I fix this? Cheers much Edit: figured it out, installed an ssd and a clean o/s and didn't install directx, all good now.
Last reply by angryfruitsalad, -
- 7 replies
- 317 views
Perhaps I made a mistake putting this in General rather than Support. My apologies if this is the case. My main hard drive had a Windows disaster and I had to run recovery software to jump ship to a new drive. Going through my HS systems to check for consistency has been the current project and PC Engine CD -refuses- to mount the disc for Magic Engine in Daemon Tools Lite 10.6. SCSI, no SCSI, add drive, don't add drive, it will. not. work. ...But Turbografx-CD does. It works perfectly, mounts discs all the bloody -live-long-day. I imported the pce.ini from one Magic Engine directory to the PCECD one, and it ignores it. Doesn't work. Brand new ini? Doesn't …
Last reply by dougan78, -
- 0 replies
- 154 views
Hi All With setting up my wheels there is the video location where the vids get stored for each wheel. Duh!!!! I have a few MAME wheels all using the same naming criteria as I'm just grouping some games together with different DBs So I don't want to copy my videos to various locations, as below C:\HyperSpin\Media\MAME\Video\ C:\HyperSpin\Media\MAME2\Video\ C:\HyperSpin\Media\MAME3\Video\ and so forth, you get the story. So I pointed all my wheels to one central location. lets say C:\HyperSpin\Media\MAME_Main\Video\ However, this does not work. And only works if I copy them in to the corresponding wheel folder even if m…
Last reply by DerikPelser, -
- 1 follower
- 8 replies
- 284 views
Yo spinners Planning to rename huge sets of PS2 roms, During the renaming process the roms must removed from original source once it is renamed and moved to another folder to avoid duplicates & double up the space. Which program can handle ?
Last reply by shitoken, -
- 0 replies
- 169 views
Hi all, Ive had Hyperspin setup for over a year now but I simply can't get it to remain stable for more than 24hrs.. it seems to lock up and become unresponsive after a undetermined amount of time. If I leave MAME active the pc remains stables for days on end but hyperspin in attract mode just seems to die after about 12 hrs. i have taken to scheduling a windows restart every day at 1am but it's still happening on occasion .. Any tips on getting it stable? When it locks up the CPU usage shows as 0% in use and 170MB ram in use so it's not a memory leak. I'm running Windows 10 Pro (but previously Win 7 Ultimate and still happens). Pc i…
Last reply by nintenjo, -
- 1 follower
- 6 replies
- 282 views
Greetings - Normally i would just try to figure this stuff out on my own, but I have found that it is just easier to reach out for help. I'm trying to get my Sega CD bin/cue's organized into compressed archives. I used to have a utility that would take the files out of the directory, zip them, place in a separate directory and name them properly. I can't seem to find that utility. I did this manually with a few, but it's going to take ages and I don't really want to spend the time on it. I've included screenshots to help illustrate what I'm trying to accomplish.Can someone else guide me to a quicker solution? How it is now(_zipped folder is ones that i have …
Last reply by badboo, -
- 0 replies
- 197 views
Hi all. Quick question for yas. I have a 0.166 mame.ahk file in my setup so am using mame32uifix 0.166 to compliment it and all works great in hyperspin. My only gripe is that i only have a 0.142 rom set so obvious some games dont work and I can't find a 0.166 rom set anywhere. My question is- is there a archive of mame ahk files so i can grab the 0.142 version to use with my roms and get a 0.142 version of mame or is there a program that will update/convert my 0.142 roms up to 0.166 to just copy into my existing setup. Thanks ever so much ?
Last reply by HulmieTT, -
- 1 follower
- 2 replies
- 198 views
Hey all, My usb fight stick works with everything except escaping mame. The esc button I have mapped through joy2key works in hyperspin and registers in joy2key but won't register in mame for "ui cancel". Any help would be much appreciated! thanks!
Last reply by MRDISCGOLFER, -
- 1 reply
- 209 views
Hello again spinners, I am having issues trying to cull my games down to just the ones within the hyperlist database. Normally I do this manaully but after a recent update I have some sets with 1000+ unneeded or double titles. I tried to use hyperchecker for the job as thats the software I use for sorting out media and it works awesome, unfortunately it doesnt seem to matter where I place my games hyperchecker cannot find them to scan. Does anyone have a better 3d party alternative to hyperchecker and if not does anyone know the "Official" directory that hyperchecker looks at for games. Cheers.
Last reply by Pwnography6, -
- 1 reply
- 180 views
Hi guys :0) hoping someone can help me with a error i get when trying to launch mame in hyperspin. I'm using the latest version and was chuffed to bits when i got Daphne working as i thought this would be the hardest to do. Then i moved on to adding my 2nd emulator. Sorry to say i am just fumbling around tbh. youtube etc. Now when i run a game in mame ( only 1 rom in there to keep things simple for now) i get the following error (see pici) and i haven't a clue ????? thing is i have an old version of hyperspin on another drive and the same mame works fine! although on that drive i can't see any rocketlauncher or hyperlauncher ????? Scratching my head now as this is all new…
Last reply by HulmieTT, -
- 1 follower
- 5 replies
- 268 views
Hi All again, I'm on the last wheel for my arcade, ScummVM I have long name game files but all the artwork I have seen is short name files, is there either short name roms or long name artwork files. I've searched the forums but have not found anything yet. and the renaming tools seem a bit too much as the short name are short..lol..hope someone can help..
Last reply by astrothug, -
I really haven't delved into Hyperspin a great deal, but I have grabbed a sort of all-in-one package, tried it out, and fiddled with the theme XMLs a bit. In those XMLs, there are ways to control some aspects of some artworks, but as far as I can tell, the appearance of the game details (in the lower left) and the game video snap both run on a strict timing: The name appears 0.33 seconds after scrolling the wheel. The video appears 0.50 seconds after scrolling the wheel. 100% reliable. I think there are ways of delaying further the appearance of the video but I have not seen anything to indicate that it can be made to appear immediately. I gotta ask: Is there a…
Last reply by 32assassin, -
- 1 follower
- 4 replies
- 245 views
Hi Guys, Im scared to ask this question in case I get the answer I really dont want. Basically, I have multiple custom databases, If i download the various genre xmls from hyperlist they dont exactly match my databases which means I end up having to tick rom only in hyperhq and also end up with loads of empty genres. (If you have a genre e.g Soccer Games and you dont have any of the games from the Soccer.xml when you select it will just go back to the main menu) Is there a tool that scans your system xml for each games genre then creates all the seperate genre xmls for you?? All of my fingers and toes are crossed right now, doing this manually or …
Last reply by RLBradders26, -
- 19 replies
- 555 views
Hi Guys, I have an issue with the game Badlands running using daphne in hyperspin. It runs verly slowly and laggy and if I press a button at all it freezes the video although you can still hear the sound continuing in the background. It runs fine using daphneloader outside of hyperspin. Any ideas what I can do as it's one of my favourite games? Also if I change settings in daphneloader and then run the game in hyperspin, hyperspin doesn't seem to pick up the changes.
Last reply by Metalzoic, -
- 4 replies
- 205 views
Hey there, I'm having problem with my .mp4 files. They audio plays, but I don't have video. I've tried converting once and got it all to work, but now for some reason I can't get them to play the video. The program I'd like to use for conversion is FormatFactory. What settings can I use for these mp4 files to get the audio AND video to play?
Last reply by Capt_Blackwood, -
- 1 reply
- 211 views
So I have been trying to figure his out and have googled around but cannot find an answer. Is there anyway to have multiple system sounds or default themes that are selected randomly? Im sure I read that it could be done in a readme I found in a sounds pack but cannot for the life of me remember how it is done. Thanks.
Last reply by Bungles, -
- 3 replies
- 199 views
I can launch Mame on it's own and it works perfectly. When I launch Hyperspin I can go to mame and brows through an endless list of roms. When I try to launch a rom in hyperspin nothing happens. I also cannot launch a rom from rocketlauncher ui, I can audit them and get a good list but when I try to launch a rom from the audit screen nothing happens. If I right click on them and try to choose the emulator to launch with still nothing happens. I can make the emulator open on the emulators tab of the mame sytem. Help appreciated thanks! Unrelated question: Does anyone know how to set super eagle filter on for all mame roms?
Last reply by itchyd, -
- 1 reply
- 287 views
Hello. I am able to use a ps4 controller or a fighting stick to control hyperspin main menu and a lot of emulators (sega genesis, snes, nes, gameboy...)... It is also possible to use a Xbox controller but when I plug in the 8bitdo sfc30 controller, nothing works. can`t remember having set up the other controllers in joytokey or so. So my question is... are all the other controllers "plug and play" ? Can I configure the new controller without deleting the button mapping for all the other controllers? kind regards NEO
Last reply by Bungles, -
- 1 reply
- 191 views
where X is Sony PlayStation and Y is ePSXe.exe in my case, but i have seen that this happens with almost every console, there are threads open with this same issue for dreamcast, mame or even atari (on other forums around the internet). first of all here is the log: 12:56:59 AM | HyperSpin Started 12:56:59 AM | Going FullScreen 12:57:00 AM | Checking for updates 12:57:00 AM | Update Check Complete 12:57:00 AM | Startup program unavailable 12:57:00 AM | Playing intro video 12:57:01 AM | Menu Mode is multi 12:57:01 AM | Loading Main Menu.xml 12:57:01 AM | Main Menu.xml successfully loaded 12:57:02 AM | Main Menu wheel loaded successfully 12:57:02 AM | …
Last reply by Arkren, -
- 1 reply
- 180 views
When I play mame without hyperspin it uses the super-eagle filter which I prefer. When I play mame within hyperspin it uses... something else. See pictures. The one with the bezel is from within hyperspin. Edit fixed the above problem but still working on the inner bezel! I'm trying to get ride of the "inner" bezel between the art bezel and the game. Any help appreciated, thanks!
Last reply by itchyd, -
- 1 follower
- 3 replies
- 435 views
Hi all, Since a couple of weeks now I notice that HyperSpin is still active in the background when I start a game up? I've read some other post but couldn't get it fixed on my setup. Has anyone have a solution how to fix this in my case? The only thing that changed the last couple of months is that I went from a xbox wired to a wireless controller, but that shouldn't be a problem right?! Any help is appreciated, here is my log: log.txt
Last reply by SamVSsami, -
- 0 replies
- 211 views
Hello, I can not find any recent application that created me rom lists, genre, year etc. . . How to do ? I used MAMEDATA but it does not work anymore since I made my update and MAME rom. thk's
Last reply by Mamecabiste,
-
Popular Contributors
