Support
Having problems with HyperSpin? You've come to the right place!
4,032 topics in this forum
-
- 1 reply
- 93 views
Hey everyone. I took some time away because of work and realised I had done the same problem I had last time.. I have my hyper spin on an external drive which was F: I also have a heap of other externals I keep my gear on as backup except if I plug them in sometimes they rename that external as the same letter F: so when I plug my hyper spin in its now been renamed to E: anyway I renamed all my roms folders and video folders In hyper HQ... and also remembered to rename the hyper spin start up script drive letter from F: to E: Now all works when I start up and I see all my wheels and even click into the different …
Last reply by patto, -
- 1 reply
- 133 views
Hoping someone can help me get ColecoVision up and running or point to some resource. Am using GigaPigs's build which calls for Mame\Mess emulator to be used. The bios (coleco.zip) has been mapped to my MAME ROMS folder. Coleco.zip contains "313 10031-4005 73108a.u2" and colecoa.rom. I have turned off fade, set logging for troubleshooting, and have attached the log as an attachment. I didn't see anything that screamed out at me. Any help or direction would be appreciated. Thanks RLLog.html
Last reply by ggamezii, -
- 1 follower
- 1 reply
- 81 views
I am looking for assistance with my hyperspin setup. Any guidance / direction would be helpful. len Lombardo [email protected]
Last reply by rastan, -
- 0 replies
- 126 views
Hello, I'm having an issue with Dice launched through RL. Dice on it's own works great all 20? games work, set up all the .txt files, etc... When I first launch it in RocketLauncherUI, the game fires up fine. I exit game and goes back to RLUI as usual. When I try and launch another game on the list in RLUI nothing happens. I figured out that DICE.exe remains open in proceses in task manager but it's nowhere to be found on desktop or minimized. I have to Cntrl Alt Del to open task manager and 'end process. *I also re-downloaded/reinstalled the 64 bit release v.0.9 and still has the same problem. Any ideas on what could be goi…
Last reply by thomas3120, -
- 1 reply
- 96 views
I used this guide to set up MAME. https://gameroomsolutions.com/setup-hyperspin-mame-hyperlaunch-full-guide/ After I ran HyperSync Cloud for artwork etc, my MAME wheel was full of games that I didn't have the roms for. So I tried the Cleaning Up Our Game List again (below) after the Sync was complete, my MAME Wheel is cleaned up but will not launch any games The games run fine from RL - I'm a noob so I'm not sure what's wrong. ini file??? Cleaning Up Our Game List As you saw in Hyperlaunch there were a ton of games in red where HyperSpin expects them to be there based on the MAME.xml file located at C:\HyperSpin\Databases\MAME. We can genera…
Last reply by tfkennady, -
- 1 follower
- 7 replies
- 110 views
Hello Peps: Noob question: I just recently installed HyperSpin, trying to set up the games on MAME, when I test, they all play too fast, I have a different MAME install and they run at normal speed, any advice? thanks.
Last reply by gigapig, -
- 6 replies
- 131 views
Hello sorry if this is the wrong section but I need help. Currently running a cabinet with Hyperspin, Rocketlauncher, LEDBlinky, ect on a custom built windows 10 pc. I managed to get all emulators and games running minus a couple systems I'm still working out. The problem is the more I do I find I'm running into issues that having windows 10 doesn't seem to be helping. The first and biggest issue is I got Windows 10 Pro edition so I could use group policy editor to boot straight into Hyperspin. Well as of some update last year they have removed that feature to only work in Enterprise or education edition. That is a bummer because now I'm forced to have a task on sta…
Last reply by justn, -
- 2 followers
- 3 replies
- 131 views
Does anyone know where I can find media resources when I can't find it on Hs and emumovies? For example it seems like exist sone different themes and video snaps\intro all of the wii u working games but I'm unable to find them. For the videos I guess sometimes it would even better to record your own video snaps(or get them from yOutube) and save them, but which method is the most pratical to do that? Also what about missing game wheels. Just by way of examples I'm missing all the ones related to pc engine, where do I find them? Generally speaking I would like to receive some tips and workarounds for missing media. Please share your wisdom!:)
Last reply by RLBradders26, -
- 1 follower
- 0 replies
- 96 views
Hi all! Hi have an Ultimarc Ultimate I/O Board for 2 players and 2 XBOX Wireless controllers. I would like to know the best way to set up all together: If is a 2 Players game, i would like to choose if i want to play with gamepad or joystick (same for both players) If is a 4 Players game, i would use 2 joystics for Player 1 and 2, and gamepads for Player 3 and 4. I had it like this with xpadder, but now i use WinIPAC i don't know how can i do it. Can i mix WinIPAC + Xpadder? Thanks in advance!
Last reply by ci2own, -
- 4 replies
- 115 views
Hey Guys I am not sure if anyone else had a similar issue with the NES theme. But when it loads up it all appears to work, however the boxes to the lower right corner are off centered and half the box is off the screen>? Is there a way to fix this?
Last reply by demonseed, -
- 3 replies
- 85 views
hello everyone is it normal that the main exe from hyperspin is seeing as a trojan by windos defender .? https://www.microsoft.com/security/portal/threat/encyclopedia/entry.aspx?Name=Trojan%3AWin32%2FRundas!plock
Last reply by rastan, -
- 1 follower
- 23 replies
- 141 views
Everything works fine now until I exit a game. I'm using an xbox style controller with JoyToKey. Once I exit a game, only the keyboard responds to control HyperSpin. The game pad no longer responds at all. If I use the keyboard to then select a new game, once I get into the game the game pad starts working again, while in the game, but still won't control HyperSpin. The only thing I can do is exit HS (via KB) and open it back up again. Then everything works fine including selecting a game, playing it, and exiting it...Then it starts all over. I don't know what else to try. Thanks, --J
Last reply by jevansoh, -
- 0 replies
- 106 views
Hi guys I'm continuing to setup my systems wheel with all of the arcade classics manufacturers....but finding that I can't sync wheel art and emumovies to some of the manufacturers... Process: For each system I'm trying to add, I'm doing the following: 1. Editing the main settings C:\HyperSpin\Databases\Main Menu\Main Menu.xml and adding my new system (Ex. "Sega Classics") 2. Creating an .ini file for the new system and putting it the folder: C:\HyperSpin\Settings\Sega Classics.ini 3. Downloading the XML for that system manufacturer - Since it appears that the hyperlist website is down: http://hyperlist.hyperspin-fe.com/ I'v…
Last reply by jtb1987, -
- 2 replies
- 94 views
Hello. I'm new to Hyperspin and I wonder what kind of scripts are used in .ahk files. Where I can find any reference or documentation?Insert other media I'm trying to create a new item from the HyperHQ with alternate emulator, so I need setup everything from the scratch, but I have a problem with losing focus of my emulator window after start emulation.
Last reply by Metalzoic, -
- 1 follower
- 2 replies
- 131 views
Hi everyone, I'm working on separating out my mame game list by manufacturer, creating systems for each manufacturer (Konami classics, midway classics, Namco classics, etc.) The process I'm going through is adding a new system via hyperspin/databases/main menu/main menu.xml. Then, I've been trying to go find the system specific xml to put in the database folder. It looks like the main xml site is down right now...so instead I've been finding the xmls by going to hypermedia section of this website and just finding the arcade system and downloading the xml that way....but these seem old (example the Namco classics one said it was uploaded in 2013). Next, I put that xml in t…
Last reply by jtb1987, -
- 16 replies
- 219 views
Hi everyone, I've started the process of creating my systems wheel, which is only going to be made up of "arcade classics" which will be my full mame game list (filtered using don's list generator). The other systems will be different arcade manufacturers (capcom/konami, etc.) that use the same roms as the main "arcade classics", just grouped/filtered under their respective system. My first question is that I'm not sure how to give my "system wheel" (where you can select from arcade classics and the various manufacturers) a background image. See the attached image, it's just black and I don't know where I go to put the background image (or themes). Sec…
Last reply by jtb1987, -
- 1 follower
- 4 replies
- 95 views
So I am having a problem when I load rom's that are pre Dualshock on Retroarch PS1. They will not work without hitting F1 and changing the pad setting from Dualshock to PS1 joypad my question is how do I configure the rom's or Retroarch to automatically load the right controller settings. I've looked all day and can't find any thing I appreciate any help thanks!
Last reply by thatshim, -
- 8 replies
- 135 views
Hi Guys, Is Pcsx2 1.5 working in hyperspin yet? Or does the module still need to be updated? I am getting the - There was an error detecting when PCSX2 finished loading your game - Problem, Best, P
Last reply by pjbridger, -
- 1 reply
- 76 views
I was able to get JoyToKey set up properly, or so I thought, and it does control all HyperSpin menu functions just fine. However, when I select a game to play, it goes into an endless loop telling me I had to have at least 5.1 or later. I have version 5.8, btw. It won't let me do anything at all, and is full screen at that point, so all I can do is restart my PC. Any suggestions? Thanks, --J
Last reply by jevansoh, -
- 2 replies
- 111 views
Noob here Very new to all this. So I have downloaded the recent MAME 0.182 ROMs (merged) and MAME 0.182 (non merged) and MAME 0.182 Software List ROMs (merged) I downloaded all these cause I'm really not sure which to use. What I'm wanting if possible, is when I open Hyperspin I am able to choose the different consoles like NES or SNES or SEGA and have the respective games in there. There are lots of games that show up in the NES but none show up in SEGA. I see games like Golden Tee and GoldenAxe in RocketLauncher but I don't see them anywhere in Hyperspin? When I go into the MAME part in Hyperspin I don't see any games either? I have used Hypersync on…
Last reply by Metalzoic, -
- 1 reply
- 78 views
Problem: HyperSpin 1.4.15 freezes on launch directly after the main wheel comes on screen. No other elements (i.e. video, graphics) load. Program must be forced to close. Problem persists when upgraded to 1.4.16. Problem ceases when downgraded to 1.3.3 (but this kills my Rocketlauncher setup , as 1.3.3 does not work with RL). PC Setup: Intel Core i7 920 @ 2.76ghz, 12gb ddr5, Nvidia Geforce 970 Here's the log: 07:14:27 PM | HyperSpin Started 07:14:27 PM | Going FullScreen 07:14:27 PM | Checking for updates 07:14:27 PM | Update Check Complete 07:14:27 PM | Startup program: undefined 07:14:27 PM | Startup pa…
Last reply by soze75, -
- 0 replies
- 78 views
I cant seem to get this to operate through hyperspin or with the launcher. It works fine on its own but when i try to use it in hyperspin games wont load at all the program opens but the window for it is invisible.
Last reply by Jasonh1983, -
- 1 follower
- 1 reply
- 114 views
Hi! I have a folder with lots of files with the same name, but different extension: Game.bin Game.cue Game.xxx Game 2.bin Game 2.cue Game 2.xxx etc. I would like to know if is there any program to batch compress in 7z to create: Game.7z, Game 2.7z., Game 3.7z, etc. Thanks in advance!
Last reply by ci2own, -
- 1 follower
- 4 replies
- 91 views
I'm trying to play bloody roar, and bloody roar 2 and both are having the same problem, they have an error where in a certain file can not be found in the zip. I have seen this before and believe it to be cause by improper versions but literally all my files are from the 182 release and the games both run fine when launch with mameui.exe so I have no idea what's wrong. please let me know what other information you may need to help diagnose my issue.
Last reply by gigapig, -
- 1 follower
- 3 replies
- 91 views
Starting to fill at end of a rope. Way new to all this. Bought external drive have done the bulk of the install. However when I opened the first time I could see all of the different systems, now when I start up it goes directly to one particular system and to make it worse if I touch any button it just spins and sometimes freezes. crazy frustrated with the whole thing. I would really appreciate any help and direction with this. Live in Southern California, access to condo and skiing on me and friend. Thanks!
Last reply by zamo24,
