Support
Having problems with HyperSpin? You've come to the right place!
4,037 topics in this forum
-
- 3 replies
- 178 views
Do we now have to have duplicate databases in both the hyperspin folder and rcoketlauncher folders?
Last reply by adamg, -
- 14 replies
- 190 views
Hello everyone I just want to say thanks in advance for any help I might get with this. Hers's the issue I own an I-PAC 4 with a 4 player Control Panel and every time i launch Hyperspin the wheel starts spining out of control and i can't get it to stop. I've done some research and so far I've disabled the Joystick, Trackball and Spinner in HyperHQ with the same result. I know the I-PAC is working because I'm able to launch Mame and other emulators and the control panel works perfectly its just Hyperspin won't stop spinning!! It's driving me nuts. I'm HP version 1.4. Thanks again!!
Last reply by DarkIsamu, -
- 1 follower
- 5 replies
- 176 views
Just reinstalled Hyperspin 1.4 and RocketLauncher, went through all the tutorials, but I can't get my joystick and buttons to work in HyperSpin. I configure it in HyperHQ and enable Joystick, but whenever I go to launch HyperSpin the buttons are out of whack and the joystick doesn't work at all. Can anyone help me out here please? Really Appreciate it!
Last reply by JoyStickKilla, -
- 0 replies
- 103 views
Hi all, when launching VBA-M (latest stable or git builds) thru HyperLaunch there is an error message shown (something to the extent of ...cannot copy config file to... *.tmp, etc.). When this happens and I close the applications down, vbam.ini is locked and cannot be opened by any other application anymore unless I use "Unlocker" to kill the process, losing the ini again. When I initially launch VBA-M directly this doesn't happen, so my assumption is that HyperLaunch is locking vbam.ini before VBA-M can make the copy. I am uncertain why the Emul does want to make this copy, but isnt it strange also that HyperLaunch locks does not unlock the file when closed? Did …
Last reply by davyd, -
- 1 reply
- 145 views
I can run ePSXe outside of HyperSpin, but when launch from within it defaults the settings "render-to-text" which crashes ePSXe. Has anyone ever seen this before???
Last reply by BigPapaMario, -
- 1 reply
- 162 views
Hey Guys, I'm new to the Hyperspin community but thanks to Simple Austin's great tutorials I've been able to get Hyperspin setup and running successfully! To take my setup even further I'd love to play it via Steam link. I've got a 360 controller attached to Steam link and I'm able to launch Hyperspin but once launched, Hyperspin won't recognize my controller. Has anyone had success using a 360 controller with Hyperspin and Steam link? I've read a few folks having success using the steam controller. Would that be the best option?
Last reply by ND4SPD, -
- 1 reply
- 147 views
win 10 doesnt like xpadder and for some reason the game sounds wont turn off while in hyperspin even thow every setting is off including going into settings.ini and changing it myself am i doing something wrong please help me get this xbox controller working without derpy programs like xpadder(constant crashing even under compatibility mode.. thanks for any help and this should be a huge priority for the devs i mean its a xbox controller one of the most common out on the market for the part near decade..sorry really pounding my head against the wall trying to fix issues on a broken program here and its very frustrating.
-
I am running HyperSpin 1.4.15. In HyperHQ I have Joystick 1 enabled. This has always worked fine on WIndows 10 until recently. I believe the anniversary update may have broken Xbox One wireless controller support for HyperSpin. I have tried on 2 different computers and it is not working on either. The interesting thing is that when hyperspin displays the startup animation if I press a button on my Xbox one controller it seems to skip the animation as if the key is detected. Unfortunately, none of the keys seem to be recognized afterwards. HyperHQ detects the controller and allows it to be mapped. Anyone else have Windows 10 Anniversary Update with an Xbox One w…
Last reply by gigapig, -
-
- 0 replies
- 157 views
Hello everyone, I found a lot of topics about this subject but not for my configuration. I would like to "hide" Windows 10 home on start and begin immediately in Hyperspin. Is it possible ? I have Windows 10 home and I already found several tutorials for Windows 10 Pro. Many thanks for you help Raph
Last reply by wegen, -
- 0 replies
- 142 views
Good morning, my hyperspin with retroarch module is not running the CUE my Turbografx CD games with sound. When I run retroarch out the same ISO CUE file it comes with sound. I looked in the module but found nothing to modify the necessary bios files I already have, if someone can give me a light on this I thank you.
Last reply by Sadnessfenix, -
- 20 replies
- 231 views
my hyperspin has a couple of things to finetune but i just received my jpac today. my original cabinet is a jamma board connected to a PCB. when i try to use the jpac to connect it to the usb in my cpu, the joystick doesnt function at all. am i doing anything wrong? initially i thought it would be a simple plug and play but it doesnt seem to work that way. will post some photos slightly later on.
Last reply by JayC, -
- 1 reply
- 141 views
Hello All, I have a weird bug that I'm living with for some years But now, I decide to attack it. I have a 7 years old arcade cabinet with all old mame and hyperspin version. 1.3.3.0 I think. When I run a mame game, then play, when I exit the game, it return to hyperspin menu, I see the wheel but it freeze everything for about 15 to 20 seconds. Then let me choose again a game. Any suggestion ? I try to download rocketlauncher but then have a lot of update to do there and there. Framework,, windows, blablabla. Oh! I make a simple test to run mame from dos and exit, everything exit fast. So it's something related to hyperspin / heyperlaunch ! …
Last reply by patrickfx, -
- 2 replies
- 126 views
i've spent a while working on this one and have not really got any where. I'm trying to use a Xbox One controller via USB on my windows 10 laptop and just can't get it functioning properly within Hyperspin menus. I'm currently using the start up script which does enable to me to kind of control the menus but when i use up and down on the d pad it brings up an on screen volume bar and just moves that along with the wheel. Anyone have any solution for this?
Last reply by Empzurg, -
- 4 replies
- 149 views
Hi guys, a few days I 've been trying to use the hyperspin but I have a very long delay when I load a game, about 30 seconds or more to start ... looks like it has something to rocketlauncher , it takes a long time to open any game. has anyone had this problem ? I'll send a video with the problem. Thanks...
-
- 3 replies
- 218 views
Hey, couldnt find anything to read on this so hopefully i can get a quick answer. I'm trying to make hyperspin only show the games i have while on the wheel, instead of showing every game on the wheel (including games that i dont have)that is in the xml file, is there a way to make this happen?
Last reply by pandok, -
- 3 replies
- 229 views
Hi Everybody, Since a while there are some issues I have with Xpadder. Player 1 and player 2 controls are constantly switched back and forth in RL, hyperspin and the games. If I enter MAME for example player 1 joystick is player 1, Player 2 joystick is player 2. If I exit, Player 2 joystick is player 1 and player 1 joystick is player 1 or 2 it depends on the mood of the PC I guess? Other times there is a different mix on which is what. So I tried, but cant figure it out. Is there a simple video tutorial how to setup 2 player Xpadder in Rocketlauncher, so it works (global setting) ? I'm not looking for game or system specific setting, just the global setup, so it works pr…
Last reply by kylecp1979, -
- 1 follower
- 7 replies
- 194 views
Hi All, Everything was running perfectly with Hyperspin 1.4 but after the Windows 10 Anniversary Update, it seems as through HyperSpin doesn't want to recognize my wireless Xbox 360 controllers. I have it set up directly through HyperHQ without using xpadder or any other script. Controllers work perfectly in each emulator, just not in Hyperspin itself to move the wheel, select a game, etc... The log says "error initializing joysticks". Anyone else having this issue? Is there a way to use the controllers with xpadder ONLY in HyperSpin? I would not want xpadder running when emulators/games are loaded. Any help is appreciated!
Last reply by Thrillhouse, -
- 1 follower
- 2 replies
- 162 views
strange problem but for whatever reason my turbo graphics 16 video snaps aren't loading up... (actually one load up side arms) I can confirm that I have the video snaps for the games and they are the same name and the video path is correct. I do know that some of the video snaps are in .mp4 and the one that seems to work side arms was in .flv any suggestions?
Last reply by rastan, -
- 0 replies
- 129 views
Hi, i'm experiencing 2 problems: - I can't see my numbers in the letter-search feature. I've been searching and didn't find anything of how to solve it. - Is there any chance to use Themes in the Genre screen (not backgrounds as now) Thank u
Last reply by RkH, -
- 1 follower
- 4 replies
- 171 views
I've only recently became a platinium member as well as a member for emumovies. Previously when I loaded HyperSync I login as a regular member for HyperBase but did not login for emumovies. I saved my login so each time I login/logout it auto logins into my Hyperbase account but not emumovies account. How do I fix this? thanks in advance!
Last reply by BBBrennaNNN, -
- 1 follower
- 2 replies
- 172 views
When I am in HQ and I go to select a rom folder the app crashes. I can manually edit the ini file and it shows up but I am wondering if there is a larger issue going on. Here is my build: i3-6300 3.8GHz Gigabyte GA-B150M-DS3H Crucial Ballistix Sport LT 16GB 2 x 8GB DDR4-2400 PC4-19200 Sandisk X300 256GB M.2 WD 500GB HD I have this issue with a fresh download of hyperspin with the latest update applied also.
Last reply by acpowell, -
- 2 followers
- 22 replies
- 574 views
Hi Guys, I found these super nice bezels someone has created for Retroarch, I can get them to work in Mame using Rocket launcher, But only by manually re configuring the settings, (i dont really know what im doing) I the .cfg files for both Retroarch and launching through mame was wondering if there was any way to easily batch convert them so they work with rocket launcher? Would be awesome to be able to use them with mame and rocket launcher, as im not willing to switch over to Retro Arch for my arcade games, Hope someone can help! Attached are all the files, Best, P cfg.rar
Last reply by pjbridger, -
- 1 follower
- 15 replies
- 292 views
Hi Everyone, I try to setup Demul 0.7 in my cab for Naomi and Atomiswave systems. Everything is running fine outside Hyperspin. I've set the emulator ready and picked up modules on the web (Cab is not linked on the web so I cannot update Rocketlauncher automatically). When I try to run a game in Rocketlauncher, I have this error message (in attachment) for both systems. Any idea?
Last reply by gigapig, -
- 2 replies
- 155 views
Hey Everyone, I know this is more of a Mame problem most likely, but I figured I'd ask cause I was already here in this forum haha. Recently something got changed in my setup, and I can't figure out what... But it seems like all games in Mame have no sound (it's possible it's just some, because when the issue first arised I could swear some games still had sound and some didn't, but now it seems like every game I try has none), but the menus in Hyperspin have sound. Any idea what I might have changed? I'm also setup with RocketLauncher. Thanks!
Last reply by bydavidrosen, -
- 7 replies
- 196 views
Please help here.. Why this happening!? :questionmark: :questionmark: IF i type Y or N anyway independet how i type, this screen disapear and back to menu =(
Last reply by gamesmame,
-
Popular Contributors
