Support
Having problems with HyperSpin? You've come to the right place!
4,034 topics in this forum
-
- 1 follower
- 1 reply
- 178 views
Hey guys, I am currently using an HDMI connection from my laptop to a 4k LED TV. The games are very pixelated (not clear like I remember them at all..). I'm guessing this is because I am using a new TV. I found a local Sony Triton CRT Monitor that is about the same size as the TV. Will this make the graphics look better if I use an HDMI out of my laptop into the DVI of the Sony Triton? Or will it still look like poo because of the HDMI? I do have a desktop computer I can use which has DVI out. Would that be better? Clearly I do'nt want to have to use the Triton, as it is 300lb, and the TV is only 15lb! Thank you so much!
Last reply by gigapig, -
- 1 follower
- 1 reply
- 145 views
Helloguys, I bought an arcade machine with HyperSpin installed on Windows XP. Everything was fine the first two days, but tomorrow, after starting up the machine, HyperSpin didn't load, instead, on startup appeared the mouse on the center on the screen and the task bar. I tried to open HyperSpin manually from there (as it had a direct access) but nothing happened. I don't know what to do and I am getting kind of frustrated, i'd appreciate any help!
Last reply by gigapig, -
- 0 replies
- 89 views
Hola, al intentar ejecutar el hyperspin, me sale el siguiente error: Hello, when trying to execute the hyperspin, I get the following error: Podrían ayudarme?? no encuentro la solución. Could you help me?? I can't find the solution. Gracias Un saludo Greetings
Last reply by Crom68, -
- 7 replies
- 132 views
All, I created the MAME.ini file w/CMD and it is in my Hyperspin/Emulators/Mame folder. However, when I open Hyperspin and try to select MAME from the wheel, I get a screen that says "Cannot find MAME.ini" (see screenshot). I have no idea what to do and I can't find an answer searching online. Anyone have any ideas? I can select other emulators, but not MAME for some reason.
Last reply by fitz73, -
- 1 reply
- 133 views
Can someone please tell me how to update hyperspin to the latest version. I'm a noob and have 1.4. I have downloaded 1.5.1 zip file but where do I put it and what do I do with it? Will it help fix my application not opening. I get a little swirly thing when I click on it, then nothing. It won't open.
Last reply by Creezz67, -
- 1 follower
- 4 replies
- 139 views
I just updatet my hyperspin to the latest version (HyperHq aswell). Now whn I enter HyperHQ i see just white screen (picture below). What can I do to fix it? Thanks.
Last reply by Creezz67, -
- 1 follower
- 1 reply
- 123 views
Hello, I have bunch of marquess to use with my LCD marquee but A LOT of the marquee names dont match with the name of the Roms. It would be a lot of work to match it one by one. is there a program i can use to do this task? Thank you
Last reply by gigapig, -
- 1 follower
- 22 replies
- 481 views
I have discovered that after updating to windows version 20H2, Hyperspin, HyperHQ, and HyperTheme no longer function. When you run them, they show up in task manager as Background processes, and consume on average 7% CPU, but never display. The only entry in the event viewer is: Log Name: Application Source: Windows Error Reporting Date: 12/21/2020 3:58:01 PM Event ID: 1001 Task Category: None Level: Information Keywords: Classic User: N/A Computer: MY-PC Description: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: HyperSpin.exe …
Last reply by gigapig, -
- 0 replies
- 109 views
Hello. Relatively new user and first time post but hoping someone out there can help with an issue I'm experiencing with my new cabinet build. I'm running HS with EDS (which in turn is launching LEDBlinky and HyperMarquee) and seeing that occasionally when scrolling through the MAME wheel, EDS is exiting (obviously taking LEDBlinky and HyperMarquee down with it). I enabled logging in EDS and am seeing that HS is sometimes sending an event with wheel item set to "C\Program". Here's an excerpt from the log (full log attached): 1/26/2021 9:46:18 PM | Event ID:7 1/26/2021 9:46:18 PM | Wheel:MAME 1/26/2021 9:46:18 PM | Wheel Item:rdaction 1/26/2021 9:46:18 PM | …
Last reply by stevepel, -
- 1 follower
- 1 reply
- 139 views
Problem is that hyperspin nor Hyper HQ wont launch, but both show running in the task manager. all files are set to the D drive. the log. txt is giving me no help to figuring out the problem either. rocket launcher loads and plays games. I am completely out of ideas on where to look next. log.txt
Last reply by gigapig, -
- 10 replies
- 209 views
Hello: I feel this is a silly question and that I just didn't tick the right box. But I've added PC Games to Rocketlauncher and Hyperspin and I'm using Killer Instinct as my test game. I am able to launch and exit the game in Rocketlauncher, but in Hyperspin I launch the game and it pushes Hyperspin into the back (making it inactive/paused) and when I exit the game Hyperspin stays in the background. I need to use the keyboard and mouse to click on it to make it active again. How do my make Hyperspin active again after I exit a PC game. I don't have this problem when I use emulators, so what am I missing? Thanks in advance.
Last reply by Metalzoic, -
- 0 replies
- 125 views
Having an issue correctly displaying Sega cd or Sega genesis games. I think any games using mega fusion emulator to be honest. once I select a game, it immediately loads the game but the display is all jacked up and the game cannot run. I checked out the settings in fusion and everything appears to be set correctly. I have attached a video that shows what I’m experiencing. Thank you! IMG_0035.MP4
Last reply by AF555, -
I’d I go into task manager and kill all processes I can sometimes restart HyperSpin and it will work the first time again. it’s seems either HyperSpin is not calling RocketLauncher the second time or RocketLauncher doesn’t work the second time. Has anyone had this issue? If so how did you fix it?
Last reply by Obizues, -
- 8 replies
- 152 views
So I just updated my pc (Windows 10), and now I can't get RocketLauncher or Hyperspin to launch any games...
Last reply by Virgs1, -
- 2 replies
- 119 views
I have been configuring a windows 10 pc with an ati card, and crtemudriver, Im now getting green videos, all mp4's, some are flv's (entire sub wheels) I have tried doing the youtube settings, which no longer exist, and flash no longer exists to turn off Hardware Acceleration, I have turned off H.E. (hardware Acceleration) in chrome, firefox, IE, windows media player.... still getting green video ( i have not plugged in my crt monitor yet, I was hoping to get this resolved before forcing low resolutions... is there any help for this? Thank you
Last reply by SORHP, -
- 4 replies
- 212 views
Hello, I have this game working in MAME 0.218 but when I launch it in Hyperspin, it says that I have not the proper emulator installed... Other Neo Geo games seems to work fine. Can someone help? Thank you and best regards,
Last reply by doohan, -
- 5 replies
- 205 views
Hi - I've recently setup Rockerlauncher with both the Frontend and Rocketlauncher keymapper profiles (with Joy2Key). I then ensured JoytoKey's default 'Profile 1' was configured the same as my Hyperspin profile. This all works and I can control Hyperspin using my Xbox 360 wired controllers. I have project64 setup for N64 emulation, but would prefer to use the emulator to configure my Xbox360 controls. The problem is that upon launching project64, it appears that JoytoKey keeps running (Profile 1 appears to be loaded) and conflicts with my controller configuration in Project64. Is there any way to disable the keymapper in Rocketlauncher for specific system…
Last reply by yuljk, -
- 2 followers
- 12 replies
- 267 views
For reasons unknown, I lose my wheel hence unable to select a game. My only recourse is to restart HyperSpin. This happens frequently when my kids are using my cabinet however, I'm unable to figure out if there is a sequence of button presses that triggers this behavior. Does anyone have any ideas?
Last reply by slizzap, -
- 1 follower
- 2 replies
- 146 views
I’m having a problem with the mame wheel spinning WAY too much in Hyperspin. I’ve heard some people talk about joy2key, but the mame whee is the only one I have problems with. It’s usually worse than shown in the video but that’s the problem I’m having. IMG_2902.MOV
Last reply by SparklePig78, -
- 4 replies
- 202 views
hi everyone, i can't install the bezels whit monitor full hd, i see black bands above and below monitor, can you help me please? Thanks
Last reply by Spawk, -
- 2 replies
- 120 views
Hey guys, I use only two wheels, MAME and PC Games. Mame works fine in Hyperspin. PC Games launch fine from RL, but nothing happens when I select the game in Hyperspin. I checked the RL troubleshooting log and there is no data for it, so HS must not be calling RL at all. The following screenshot shows my Wheel Settings. I've tried setting the ROM path to the folder for some of the specific games, but nothing changed. Is there an xml or ini file that HS can't find to send the appropriate data to RL? I tried changing the execution to HyperLaunch, and it said it couldn't find, " ...RocketLauncherUI\databases\PC Games\PC Games.xml" I thought the only xml should…
Last reply by JrobATL, -
- 2 replies
- 109 views
Bonjour, j'ai un soucis depuis la réinstallation de Windows 10 mon Hyperspine ne ce lance plus, pourtant bien actif dans gestionnaire de tache . quand je suis dans Rocketlauncher et que je faire un teste, tous ce passe bien l'émulateur le jeux tous ce lance parfaitement. je ne comprend pas ce qu'il ce passe quelqu'un pourrais t'il me venir en aide
Last reply by Spawk, -
- 1 follower
- 10 replies
- 155 views
Hello, I'm fairly new to hyperspin (been using a couple of months) I have configure my keyboard layout with an iPac Ultimate but I ran out of buttons on the for my player 3 and 4 coins, so i bought a Ultrastik 360 to replace a couple of pins for a joystick. The problem is I can't get the joystick to be used in hyperspin at all. Does anyone have any experience with these joysticks and hyperspin set up? Thank you
Last reply by gigapig, -
- 1 follower
- 1 reply
- 97 views
Hy guy. I am french. so sorry for some language mistake. I am trying to use ahk keymapper modules in hyperspin and hyperlaunch v2.25c for emulator (with hyperlaunch), it's ok. I am able to load ahk module for keymapping. BUT, for hyperspin, the HyperSpin.ahk is not loaded..... Is there any thing to do for that? I know there are several 3rd party for that (joy2key,....), but I would like to use only hyperspin and hyperlaunch for very clean install.... Regards
Last reply by gigapig, -
- 1 follower
- 10 replies
- 179 views
So allow me to skip the incredibly long story and just get to the fact that on my Hyperspin Main Menu, I have a MAME wheel along with about 10-20 PC Games (yes, all on the Main Menu). The PC Games are a mix of abandonware and Steam games and they all launch fine from the Main Menu, LEDBlinky runs great with all of them, life is good. Question: I've tried putting videos of some of the games into the Main Menu media folder and naming them the same as the executable ("Crazy Taxi" for example), but Hyperspin doesn't load the preview video. Am I doing something wrong, or does Hyperspin not load up preview videos on the Main Menu for items that are executables (ins…
Last reply by JrobATL,
