Support
Having problems with HyperSpin? You've come to the right place!
4,034 topics in this forum
-
- 8 replies
- 300 views
I have just started work on my arcade machine project again after quite a while away fixing up a DDR machine and Judge Dredd Pinball machine. After updating everything and fixing all of the problems which came from that I thought I would finally have a go at getting Bezels working through HyperLaunchHQ. I followed GigaPigs guide in this video and everything went smoothly however I have massive performance issues when the bezels are enabled. At the moment I have only tested with MAME but any game I load runs incredibly slowly and the sound is breaking up because it is running so slow. My PC isn't super high spec as my aim was to build the cab with parts I ha…
Last reply by potts43, -
- 10 replies
- 206 views
Hello fellow Hyperspinners, It has been over 10 years since I messed around with Mame. Well Hyperspin FE alone has caught my attention to build another cab for my two kiddos. I was one of the guys that was about to purchase a $350 pre-configured hyperspin hdd because there was so much conflicting information on how to install it. Then I ran into Simply Austin recent youtube videos and I am here back on the scene. It feels much better to spend that money on membership here, on emumovies and the scene for support. Plus the satisfaction that I did it on my own!! Well, back to my question....I have managed to to setup Hyperspin with Mame and its running perfect…
Last reply by cdavila74, -
I totally wrecked my whole setup that was running perfect I turned Bezels on in HyperlaunchHQ, got them to work, but my games were lagging horribly. So i turned it off and it's still lagging!! It doesn't lag in MAME, or if i launch a game through HyperLaunchHQ, but if i load up hyperspin and play a game it lags horribly. What the hell could i have done? All i did was change the bezel settings in HyperlaunchHQ
Last reply by magus90, -
- 3 replies
- 191 views
Hi guys, I have some questions, can you help me please? 1) in HyperHQ, in the NAVIGIATION/THEMS section, if I check Roms only and/or wheels only in order to visualize only the emulator that I have configured with the roms, when I select the system (Nintendo NES) Hyperspin immediately crashes. Why? How can I visualize in my system wheels only the emulator that I have currently configured? 2)How can I configure in HyperLaunch, the FADE GENERAL tab? can you post your configuration please? And why a FADE sometimes has Layer1, Layer2 , ExtraLayer 3 files and other times it has other files named in diffrent way? thank you
Last reply by legolas119, -
- 3 replies
- 204 views
Howdy Hackers, Hello I am new to the world of hyperspin! I have setup with art wheels and videos a full working MAME system. The only problem is that within hyperlaunchHQ it works, on the hyperspin wheel i can see everything but when i press enter, nothing happens.. Log say (example) 06:19:42 PM | HyperLaunch Command Line is: D:\hyperspin\HyperLaunch.exe "MAME" "gfire2" 06:19:43 PM | Launching Game 06:19:43 PM | Using HyperLaunch 06:19:43 PM | Getting HyperLaunch path 06:19:43 PM | HyperLaunch located at D:\hyperspin\HyperLaunch.exe 06:19:43 PM | Running HyperLaunch.exe Does apply also on Atari Lynx (working with ALT+L inside hyperlaunhHQ , nothing on h…
Last reply by robertmedl, -
- 4 replies
- 133 views
Hi All, I'm nearing completion of a bartop Hyperspin (Primary function) alongside Jriver and a few other apps. I'd like to make a certain keyboard sequence exit the emulator (if any) and close Hyperspin. The reason is I may use a remote with a button to launch a script. The likely sitatuion is I'm playing a quick game of NBA JAM and it's time for dinner and I need to Skype a family memory oversears. I'd like to push a single button, have it close Hyperspin and launch the other program. The launch I can do, how to gracefully close the emu's and Hyperspin. Is Taskkill /IM the answer? Tried that and got a Hyperspin stopped responding error
Last reply by eezetee, -
- 1 reply
- 142 views
hi all in the mame sub wheel at the bottom it says current genre: ALL GAMES how do u remove that thanks. update: its ok I sorted it.
Last reply by ninja2bceen, -
- 4 replies
- 135 views
Hello guys, I'm using Wii covers for wheels since only a few are available. I'm looking for that: But when I use my wheels, even if the resolution is very low (200x100 or something), I'm getting that: I've attached my setting to this screenshot, anyone knows what should I do? Thanks in advance.
Last reply by justice999, -
- 9 replies
- 347 views
If u already have an Installation of HyperSpin how do you upgrade to HyperSpin 1.3.3.0? without losing custom changes to Artwork, database files and Media?
Last reply by damageinc86, -
- 2 replies
- 93 views
Instead of moving mouse to icon then double clicking?
Last reply by delt31, -
- 1 follower
- 6 replies
- 141 views
I signed up and have an active account yet it says I still don't have access to download or post topics. I know you have to pay for the 480 videos but I can't even create a topic to ask why I can't do the 240 so I thought someone here might know what's going on. Thanks.
Last reply by Circo, -
- 0 replies
- 114 views
I tried adjusting the wheels axis, but it seems that HyperHQ allows me to only adjust horizontal wheels, is there another way to ajust vertical wheels the way we want? Thanks for reading.
Last reply by melquiades, -
- 6 replies
- 609 views
Hi all: I'm the new guy around here. I've just gotten my NES section almost complete, but I notice that a few wheel art images aren't showing up. I've literally hit F2 over the ROM name, copied it verbatim (less the extension) and pasted it over the wheel art name that I'm trying to load. In one case, I think it might be an issue with the length of the filename, and in other cases I thought it may have been use of the "&" character causing trouble, but I've got other titles with the "&" character linking up properly. Here are the image names giving me trouble (and again, I have confirmed that they match the ROM names): Fox's Peter Pan & The Pirates - …
Last reply by what2be, -
- 2 replies
- 129 views
Hi, I am looking to set up a spare computer to run Hyperspin but I can't seem to download the main file ( From http://www.hyperspin-fe.com/files/file/7667-hyperspin-full-install/ ) It start's to download, gets about three or four seconds into the download, then stops. I've tried several times, over a few different days and the same problem keeps happening. I was wondering if there was another download link? Thanks
Last reply by cheaky, -
- 1 reply
- 181 views
Since the update of the website, most of the links I click on seem to be broken or missing so I have decided to post here after watching many videos I have finally reached an impasse. When I try to run any MAME rom from within Hyperspin, I get the error. C:\Hyperspin\Modules\MAME\MAME.ahk. You do not have a Hyperlaunch 2 module for mame. Please create one or check hyperlist. log file 06:15:14 AM | HyperSpin Started 06:15:14 AM | Going FullScreen 06:15:14 AM | Checking for updates 06:15:14 AM | Update Check Complete 06:15:14 AM | Startup program unavailable 06:15:14 AM | Playing intro video 06:15:15 AM | Error intializing joysticks 06:15:15 AM | Menu Mo…
Last reply by matabhaine, -
- 5 replies
- 179 views
Hey guys Was just wondering if there was a way to not show the ROM name in the hyperspin menu?? Thanks a bunch Joe
Last reply by Brob78, -
- 0 replies
- 111 views
I installed hyperspin on my old laptop and worked fine, this was done as a tester I then went on to install it onto my nice new PC I build and works fine I then went on to install it to a old pc but not that old and I get a blank screen when I start hyper spin FE PC in question Biostar G31 Motherboard Intel E6300 Core Duo 1.86GHz Onboard DX9 Graphics (Also tried ATI HD2400 Pro DX10) 1TB HDD 2GB DDR2 Ram can anyone help I just cant under stand why im getting black screen and nothing else all other machines I tried HS FE works fine i have installed DX Redist, VC++ Redist .NET Framework 4 and HLHQ and HSHQ open up just fine
Last reply by silverfox0786, -
- 0 replies
- 106 views
Guys when I try to run retroarch manually it loads fine, I hit f1 to access menu and ican scroll.. However x and z do not enter any sections? I'm guessing the controls for menu have been changed? Anyone know how to reset? I don't want to mess with config tat could effect the emulators I managed to get working with hyperspin. Also is there photos comparing what various filters look like? Thanks jim
Last reply by demonseed, -
- 0 replies
- 115 views
Hi anyone using this most up to date version? What are the recommended settings? I tried one game and it was going 200% frame rate Thanks
Last reply by ninja2bceen, -
- 1 follower
- 8 replies
- 291 views
Hi, First of all thanks to everyone who is continuing to participate in the community and help us (or me =)) out! Much appreciated in advance. So essentially I have everything working the way I like it, with one small issue. I need Hyerspin to launch Steam in Big Picture mode from the main wheel. So far I have manged to achieve this via HyperspinHQ and it works, but the problem is then I am stuck with the main interface xpadder profile. I attempted to get around this using autoprofiles with steam.exe and a blank profile and it works to some level but when I am done with Steam I get left with no profile on Hypersin again. So I know there is a way to launch Stea…
Last reply by gigapig, -
- 1 follower
- 4 replies
- 204 views
I am trying to get Pacmame setup, but are having a great deal of trouble. Has anyone got this working, I am using pacman.exe and using casual games.ahk but this only excepts exe file. I can see only one thread on this, in which the guy says hes got it working, but I can see how with this module. What module do I need to use. Any pointers would be really good. thanks john.
Last reply by gigapig, -
- 2 replies
- 107 views
I want Mame, followed by SNES, etc but only see a way to remove the emu, not reorder. How do I reorder the emus I select from on the main menu wheel?
Last reply by delt31, -
- 2 replies
- 105 views
Someone KNOW Directions as Wheels More to Left ? Know hair HQ NO DA, but ... MAYBE hair ini file , like, the only wanted them to be centralized in Space Correct make my theme . I hope someone can help me . ( Google Translation )
Last reply by Aorin, -
- 9 replies
- 164 views
Maybe I just never noticed it before Hyperspin but when I launch KI it plays perfectly fine except the sound will out of no where stutter (like someone bumped the record player) and then auto corrects itself. Is this just how it's emulated or is it Hyperspin or maybe a monitor refresh issue? Happens with KI and KI 2. Anyone experience this?
Last reply by delt31, -
- 1 follower
- 3 replies
- 212 views
I recently downloaded the new hyperspin. Wheel and everything seems to be working properly...Joystick is configured...ROMS will NOT start...please help...
Last reply by gigapig,
