Support
Having problems with HyperSpin? You've come to the right place!
4,028 topics in this forum
-
- 2 replies
- 803 views
The past week I have been obsessed with HS and building my own arcade machine. I have a recording studio with a bunch of classics systems setup, just consoles. THEN I came across this site and now I can't wait until no more tripping over controller wires and hooking up systems and unhooking systems, changing out discs and carts. So, anyways big props to this site and everyone on here for making it so easy. I had zero experience with this kind of stuff and my HS is almost done. Ok so I went ahead and paid the $45 for plat membership and I read I need to send Badboybill a PM, so I did but when I hit submit I still had no sent messages and I got no message saying it had …
Last reply by rfancella, -
- 5 replies
- 395 views
Hey guys, I was just wondering if there is some way to make a global keyboard key set for hyperspin? I seem to always have issues with different emulators, aside from MAME. For example, I have Fusion for sega, and the only way to exit is by pressing the ESC key. Or Project 64 seems to only exit by pressing ALT + F4. SSF doesn't seem to like any keys that I use, like CTRL or SHIFT etc. I bought an X Arcade joy pad and all the buttons I use are from the keyboard. I also use Hyperspin with the new RocketLauncher setup. (which is amazing btw) I know its probably not possible, but is there any way to have a specific key set in Hyperlaunch or do I have to just deal with a…
Last reply by Fromlostdays, -
- 1 reply
- 182 views
Sorry if this has already been asked, but could not find a post relating to my issue. So far this is the only problem I have come across using hyperspin. I am using a wired rockcandy xbox 360 controller for my setup. Works excellent with my mappings for each of my individual emulators being used. However after mapping it through hyper hq to use the controller to navigate hyperspin and eliminate the keyboard I get no response from the controller. Joystick is enabled through hyper hq. On the other hand if I navigate via keyboard the controller still works fine and as mapped in the selected emulation. Not sure what I might be doing wrong here. After this and setting up exit …
Last reply by marxkemp, -
- 9 replies
- 4.6k views
I'm running project64 1.7 and it plays the games fine when i run it outside of hyperspin. When i use hyperspin the game loads and i can hear audio but the screen is black. I can't figure it out. Here are my settings for Hyperspin [exe info] path=C:\Hyperspin\Emulators\Project64\ rompath=C:\Hyperspin\Emulators\Project64\roms\ userompath = true exe=Project64.exe romextension=zip parameters = searchsubfolders=false pcgame=false winstate = HIDDEN hyperlaunch=true [themes] themes_only = false animate_out_default = false [wheel] alpha = .15 style = normal speed = high vert_wheel_…
Last reply by jojocool111, -
- 4 replies
- 334 views
Hi everyone. I'm hoping that somebody can help me out again here. I'm having a problem when playing games using Epsxe. Sometimes when playing, the CD audio will freeze and the game will crash the next time it tries to access the disc. I believe that the disc image is unmounting itself at random. It usually happens after 15 - 20 mins play, but not always. Has anybody else run into anything similar? Thanks! =)
Last reply by mikexpose, -
- 3 replies
- 465 views
Hello all. First, I followed the directions on installation here: http://www.hyperspin-fe.com/forum/showthread.php?29481-How-to-install-HyperSpin I tried on my regular desktop, and got everything running successfully. I copied the setup to my Mame machine (also re did it there from scratch, same results) and started facing a strange issue: Hypersin would start up, last system is Mame, and when it is about to load the demo video with street fighter, it would crash with a blue screen and my PC would reboot. If I move the wheel around before it can load the video, no problem. If I go into the Mame wheel quickly, no problem. However, in Mame wheel, if I go to 88 games (the…
Last reply by Polemicist, -
- 1 reply
- 402 views
I have downloaded the HyperSpin Install Files v1.3.2.0 and setup my keyboard for my initial testing of this software. It looks like everything runs as normal with my keyboard. My arcade cabinet controls are hooked up via a XIN-MO encoder board which is recognized by windows, and I have verified that all of the controls work under the windows controllers testing area. I then set up my XIN-MO controller in HyperHQ by pressing the set option, and setting each of the controls, and this works correctly. I set up both "joysticks" (1 & 2) this way. (The controls are all controlled by a single XIN-MO with dual player channels.) I have both "joysticks" enabled. I loaded H…
Last reply by Agrajag, -
- 2 replies
- 581 views
BUENO HAY ALGUEN QUE ME PUEDA DECIR QUE PASA CON ESTO. AL INGRESAR FUNCIONAN LOS VIDEOS TODO BIEN PERO SELECCIONO UNA CONSOLA MAME POR EJEMPLO Y CUANDO LE DOY START VUELVE A CARGAR Y NO MUESTRA LISTA DE ROMS ALGUEN SABE QUE SUCEDE QUE SE PUEDE HACER saludos proyecto acade casero 2 meses de trabajo aprox
Last reply by Johnny Mazzic, -
- 21 replies
- 1.8k views
Hello Everyone, I am just wanting to know how i can go about getting Hyperspin to launch an exe file for vertical Mame games and another for Horizontal games. My reason is for my rotating monitor i have built a USB rotating system and just want to implement it into my cabinet. This is what the GUI looks like and a demo of the system, You can view the full project here. http://www.hyperspin-fe.com/forum/showthread.php?26691-My-first-Arcade-Build-Rotating-CRT-amp-More
Last reply by USRFobiwan, -
- 8 replies
- 683 views
Hello All, I have been out of the arcade scene for a bit but I'm looking to get back into adding some PC games to my arcade cabinet. So much has changed since I last dove into it that I wanted to see what the best possible solution for my situation would be. I'll try not to write a novel. I am looking to add a few multiplayer PC games to the mix. A few of them do not allow you to edit keybindings. Since I'm using 2 ipacs (4 player mame setup) this isn't going to work. What I would like to do is create 4 virtual gampads in a program that would auto launch and close when a specific games starts and exits. Is there anything similar to Joy2Key that emulates game pads? …
Last reply by brolly, -
- 7 replies
- 467 views
Hi everybody, Last night I managed to get the Commodore 64 GameBase collection GBC_v11 up and running via Hyperlaunch and GBLauncher. It was quite the task for me (had to write my first custom .ahk file), but it is working! However, the roms I have are named like they came in the GBC_v11 and I suppose that wont match with the emumovies naming convention. The rom names in the HyperList Commodore 64 xml do not match. So how do I rename those roms now? I have one xml that was created via exporting from GameBase and running through RomLister. It contains the rom names and game names. The xml from HyperList contains the game names and the correct rom names. Can anybody h…
Last reply by dougan78, -
- 9 replies
- 539 views
Hi Everyone, first time poster, been reading forum for a bit. spent a bit of time in last 2 months setting up hyper spin, emulators are pj64 1.6 nestopia zsnes psx2 dolphin fusion kawaks epsxe I've checked the forums and google searched also, everything i seem to find is either very old or i can't access it on this forum for some reason. so i have a bunch of questions, but ill limit them for my first post. let me start by saying, i am not good at this. i have most things working the way i want except the following but if your suggestion is pasting code somewhere, and ill really appreciate it, but ill need to know where to paste it. can i make all emulators exit…
Last reply by sandman7793, -
- 2 replies
- 297 views
I have searched and can't find a thread matching what I need. Is there a guide out there that details the integration of a JPac and Hyperspin? More specifically, where in the global settings do I need to configure so that my 2 player, 4 buttons per player setup is recognized by HS? Do I have to configure it for MAME and then each emulator separately? MY system now is set to use a 360 controller via X Padder. I understand how do do all that but I'm not seeing a lot of info online about using a J Pac with HS. Hope all this makes sense.
Last reply by 32assassin, -
- 31 replies
- 2k views
Morning folks,hope you are all enjoying the sun,I took my Bartop to a BBQ and it was a hit, The only problem was when exiting from games back to the menu the delay was quite long ( about ten seconds) some players thought they had broken it and kept hitting the power button This is the only machine that does this I have a feeling that its something I have played around with one of the options can anyone think of something that maybe causing this delay??? Many thanks Steve Gaming in the sun Can anyone
Last reply by monkeychunkuk, -
- 5 replies
- 325 views
Hi everyone, I'm relatively new and am getting towards the end of my first setup so I'm messing with some bells and whistles. I spent some time tinkering with fade and really got nowhere. It seems that no matter what I set things to, I could not skip seeing the windows desktop and emulator(s) loading. Searching the forums, many of the questions/answers about fade were from 2012 and older versions of hyperlaunch/modules so they didn't prove to be as relevant now. Basically I will just throw some questions out there, forgive me if I'm the 800th person to ask any of them! Note: I'm not messing with any images/layers yet, though I do plan on eventually using fade to di…
Last reply by djvj, -
- 8 replies
- 1.3k views
I was wondering if there is a way to copy just the games that are in my xml to a different folder. I want to keep the whole romset together, but I want to have a copy of the ones in my xml on an ssd. Anybody know of an easier way to do this, rather than going through and selecting all ~1500 by hand?
Last reply by USRFobiwan, -
- 5 replies
- 286 views
Hey All, Setup hyperspin, all configs, everything working great at my office. Had computer off for about 3 weeks and took it home. Hooked up keyboard, monitor, and mouse, and suddenly hyperspin starts acting strange. When selecting a console, it just loops back to the main menu. When trying to use the esc key, it just pauses hyperspin. I rebooted the computer and same behavior. Thinking that I had something that went wrong in hyperlaunch, i brought it back into the office to work on it. Hooked it up, and everything works completely normal, as it did before. Menus work fine, esc works, selecting console takes you to games list. What gives? The only hardware that ch…
Last reply by Agrajag, -
- 5 replies
- 368 views
Hi all, Wanted to control Hyperspin fron end with the Joystick / buttons. I have the Xin - Mo 2 player usb controller set up with the joystick 7 button (mame / neogeo setup) with independant start and select (coin in) buttons and r3 set as an exit button. I have tested both inputs in windows (device manager) and it recognises ALL directions and button presses. I enable the Joystick I launch HyperHQ - select controls / joystick and enable the joysticks click set and follow the simple input process (HyperHQ recognises the inputs). Then exit HyperHQ. I launch Hyperspin and the controls do absolutly nothing. Could someone please assist on this matter. Kind regards …
Last reply by Agrajag, -
- 6 replies
- 356 views
So I just started using the new Hyperspin and all. I setup HyperLaunchHQ emulators and the roms etc. But now when I go to Hyperspin and try to enter on the wheel it doesn't work. It acts like it's going to then it just resets the wheel and stay in the same spot. Any help on this to what I may be doing wrong ?
Last reply by Hoppy72450, -
- 6 replies
- 1.4k views
Hello My windows screensaver does not start when HyperSpin FE is on . I have Windows XP SP2 and I want to use Windows Video Screen Saver with some videos and pictures (or any screensaver even blank screen) when no one is touching the controlls for a period of time. I tried it on 3 different XP machines with no luck. However, I did not have this problem with Mala FE. Is there anything I can set-up/adjust in Windows (registry, .ini files etc) to make it work or maybe there is any other screensaver I should try? Or perhaps there is any way around this problem, like klling HS when not active, calling screensaver and and then running HS again? Many thanks in advance for yo…
Last reply by Flake, -
- 10 replies
- 622 views
Hi, For starters, im really new to this HyperSpin program. I got several emulators running (SNES,Gameboy Advance, Color, Playstation, and atari 5200) with the artwork and everything. I even have the PC Games wheel. I write my own XML files so i only play the roms i want, and it seems to have worked out so far. Anyway, for the past 3 days I've been trying to set up MAME 0.153. I've tried using MAME 0.153 from the mamedev.org website, MAMEUI 0.146 (because my computer is a 32 bit system), AND MAMEUIFX 0.153 from the mameuifx site. Every time I try to run ANY of these outside of HyperLaunch or HyperSpin, I can't get them to work... When i run MAME 0.153, the screen just goe…
Last reply by gigapig, -
- 4 replies
- 3.9k views
Finally picked up a new graphics card and have MAME 153 Working. Problem now is I need the bios pack because not all my ROMS are loading any of you chaps point me in the right direction?
Last reply by yashijoe, -
- 6 replies
- 777 views
Hello everyone, I'm still struggling a lot with my project, too many days between the settings. Anyway. On a French website, they've done some ready to use LCD pack, Cab pack or Mame pack etc... what about a "officil default" pack? For example, I would like to stick as close as possible from the official realease, but when you're a noob, ilt's not quite easy. What about dedicated pack? Where we just have to download via torrent or filesharing website? Nothing illegal I mean (excluding rom of course). Simple idea, would like to have your opinion about it. bonus question: can we discuss about Pleasuredom or it's forbidden here? Cause i'm totally lost. Cheers from F…
Last reply by Mydriaze, -
- 17 replies
- 1.7k views
Experiencing a new error. A few minutes after launching a MAME game, HyperSpin all of a sudden retakes focus and the MAME game is still running in the background. Any ideas?
Last reply by wakeet, -
- 10 replies
- 2.3k views
I am new to HyperSpin, and I can't seem to find the answer to my question anywhere. Is it possible to change the location of the media folder? I'd like to keep HyperSpin on my SSD and have the media on my WD green drive that I use for storage. Thanks in advance.
-
Popular Contributors
