Support
Having problems with HyperSpin? You've come to the right place!
4,034 topics in this forum
-
- 1 reply
- 109 views
Hello, I use HS with RL and when HS start, it keeps on the background and joysticks (configured with xpadder) don't work. To resolve this problem, as I didn't find another real solution (so this topic), I need to click once with the mouse, and then everything works well. Could you help me finding a real solution ? Thank you !!!
Last reply by Toiletkommander, -
- 1 reply
- 248 views
Before anyone mentions it, I don't want RocketLauncher. I also understand and acknowledge that I am using an older and no longer supported version of HyperSpin. I did so on purpose because It's super tiny, I have limited space to work with, and doesn't contain the unnecessarily complicated set up that RL did. I did try RL. Was never able to actually see any improvement with it over HyperLaunch. In fact, I didn't notice any changes at all and it took up too much room. I only have 30 gigs on my flash drive to work with and I need all the space I can get for my arcade set up. (I have my own personal reasons for using a 32 gig flash drive) If I came off as arrogan…
Last reply by NonchalantShallot, -
- 1 follower
- 3 replies
- 134 views
hello everyone i need help with this error, the games play with no ploblems in RocketLauncher but not in the wheel, when i hit enter in the wheel the games wont launch any advice?
Last reply by gigapig, -
- 1 reply
- 130 views
Helllo. I've been trying to update my setup and was wondering what is the easiest way to download the best 16:9 MAME game themes. Is it a manual process to search for and download each games or is there a curated collection somewhere that can just be downloaded at once? Thanks!
Last reply by TheManuel, -
- 3 replies
- 108 views
I'm using hyperspin with rocket launcher and retroarch. When i start hyperspin it has sound and the videos play but if i start then exit a game there is no sound and the videos lock up after a second. I can still navigate around and start games and they work fine but the sound and videos don't work again until i exit hyperspin completely and restart it, then everything is back to normal till i start another game. I'm on an Acer laptop with windows 7 64 bit.
Last reply by shocko256, -
- 1 reply
- 81 views
How do I get the emulator to show up in the UI? Any suggestions?
Last reply by adamg, -
- 2 replies
- 100 views
Hi all. Hopefully an easy question..I've installed a preconfigured hyperspin build to help me get started with the program. I'm trying to figure out how to disable this bezel and rounded corners tv effect(not the scanlines) that came as default.. not sure if this is even hyperspin specific or within the emulator itself. I see there is a option in rocket launcher for enabling/disabling UI effects but this doesn't appear to do anything? any help is appreciated!
Last reply by JVIDICAN, -
- 6 replies
- 145 views
so suddenly if i launch rocketlauncherUI i get nothing but it lauches cause the screen flashes and if i ALT tab i see its minimized but i cant fo the life of me get it to open to the gui??
Last reply by streetmedic, -
- 4 replies
- 139 views
Hey Guys I have just got round to setting up the bezels for mame. Everything is working and I have the bezels and scanlines looking sweet. thing is when I open a game I get a window around the bezels as they are loading, I have added backgrounds to the rocketlauncher background folder and set global and mame backgrounds to true with no joy to hide this annoying visual, but alas to no avail. What am I missing??
Last reply by bigdic, -
- 10 replies
- 176 views
Hi all, I've been working on setting up HyperSpin with GroovyMame since yesterday. I managed to get MAME, SNK Neo Geo and Capcom Play System 1 working well. However, I'm trying to set up CPS II but I just can't get the games to start in RocketLauncher or HyperSpin. I had the same problem with CPS 1 and fixed it by downloading the CPS 1 xml Database from hyperspin-fe. I'm of course using the CPS 2 xml database from hyper-spin-fe now but it just won't work. Hoping anyone can help me out. I tried to look through this log file and noticed it said the rom was not found. Is this the issue? Because the zip file is in the roms folder, so it should. ? Lo…
Last reply by Sefirosu789, -
- 1 follower
- 1 reply
- 96 views
Hi, Got an old hard drive (3 years old). I just want upgrade it for my news pc. Working on Windows 10 pro. What is the command for ?? I don't want touch any files in this drive. Just the upgrade. THx
Last reply by gigapig, -
- 25 replies
- 402 views
I can't find any decent tutorials or guides that deal with just the base software. I don't care to use Rocket Launcher as I have neither idea what that even is, nor do I need anything extra. The base software seems to work just fine for organizing the games into a nice menu, or at least that's what it looks like on youtube... At this point, I'm so aggravated by this software that I can't even type proper sentences without wanting to use foul language or act like a jerk. I'm just so.... angry. This program has caused me nothing but headaches and stress. It simply doesn't work. That's not to say it's the developer's fault. It's clearly a user error. I'm just too s…
Last reply by NonchalantShallot, -
- 3 replies
- 197 views
I have been searching all over the internet to find a full media pack but I haven't find such thing.Can somebody upload or link to a gull media pack. Thanks in advance.
Last reply by MimoPakou, -
- 1 reply
- 101 views
Hello, i need help. I want that if I go to NES, after the video snap is over, it automatically jumps to the next game and plays the next video snap. Is this possible? Maybe in the options?
Last reply by Aorin, -
- 22 replies
- 201 views
Hello to all! I've searched around the board, but unfortunately I couldn't find the same issue with a solution, so I decided to start a new topic. I have a hyperspin setup with different Emulators, and I was used to start those with the "Enter" key. This won't be working anymore. When I hit now the "Enter" key, Hyperspin jumps back to the emulator selection to the default emulator instead of starting the selected emulator. Also the "ESC"-Key won't exit the Hyperspin anymore. It toggles now between pause and un-pause hyperspin. I can only leave hyperspin with [ALT]+[F4] now. The setting file is configured correctly and is unchanged in the relev…
Last reply by Tedadar, -
- 6 replies
- 117 views
I have setup hyperspin correctly (I think) I have added some nes roms.When I launch them from rocketlauncher it works fine but when I go into hyperspin and I press the nes system it will kick me back to the main menu without showing me even the roms.Btw hypersync says: Hypersync could not find any configured systems. Thanks in Advance.
Last reply by MimoPakou, -
- 0 replies
- 93 views
Need some help. I have successfully installed most emulators, steam games and non steam games onto my install. I have Forza 4 for the windows store. Does anyone know how to get that running from hyperspin? The usual methods of adding the game to the database and telling pclauncher what exe to load doesn’t seem to work.
Last reply by jivemd, -
- 2 replies
- 136 views
I was wondering if anyone has had an opportunity to use Bliss Box within their setup? I am currently using Joy 2 Key for my controller setup, and I was trying to use this product, but whenever I tried to switch the controllers, the device should send an auto-pause command so I could switch out controllers, but it seems not to work. Thanks for the help. Emilio
Last reply by ninja2bceen, -
- 1 follower
- 3 replies
- 145 views
Hi, I have just downloaded and installed Hyperspin, RocketLauncher and Don's Hyperspin ROM Renamer. I have been following the tutorial videos and have been successful up to the point of renaming my roms. I only have MAME installed so far and have downloaded the latest XML file for the ROMS. When I try and run The renamer tool it does not seem to do anything, the program loads and I tell it the location of the XML (MAME 02/08/2016) in my hyperspin folder, I tell it the address of the Roms folder and I tell it where the new files should go. when I hit "scan" the new window opens but nothing changes. I tried watching the tutorial again but I feel like I'm missing something…
Last reply by 32assassin, -
- 0 replies
- 115 views
I run into a weird issue running HyperSpin on a laptop with ati 5000M and pentium G cpu. Basically if HS reads a movie (.mp4 or flv with h264 codec) before launching a game the videocard get somewhat stuck and can't properly run mame BGFX nor RetroArch CG shaders, slowing down the whole thing. Without shaders emulation's speed is ok and using Flv with FL1 codec inside HS totally resolve the problem. The bug happens when HS engine is used to load/unload videos and when I load/unload the videos using my actionscript3 code inside a .swf, OS is Windows7 Ultimate SP1. The question is this: does HS actually steals GPU power when using .mp4 and I never noticed it …
Last reply by dark13, -
- 0 replies
- 88 views
Ok long story short, i just got back from a tour of duty, now state side. Fired up my cabinet for the first time since i left, played for few hours last night, windows updated over night, put 2 and 2 together and downloaded the new hyperspin update, made exceptions to the fire wall of all the hyperspin.exe including rocket launcher and HQ. Reloaded it up... and now none of my buttons work. gah... what am i missing?
Last reply by dakotalew, -
- 1 reply
- 114 views
Hi, Hoping someone can help with this, I've just updated Hyperspin, and found that once it boots up, it goes to the last wheel used - which is fine, but i'm sure that when left alone for a few minutes, the wheel would shuffle between other system frontends, until you touch the controls again Am i going mad, or is there a box that needs ticking in Hyper HQ? Thanks for the help
Last reply by Bungles, -
- 3 replies
- 123 views
Little problem . When i scroll in my mame games , i get always to see " current games : all genres " How to get rid of this ? In mame database i get rid of all the oter folders , i have there only my database that i created trought rocketlaucher . I am just creating my mame list with my selection of the best games .
Last reply by defre1976, -
- 1 reply
- 89 views
So im working on running a ton of custom games through hyperspin. Although recently some games from GOG are having issues. It may have something to do with unity games though. So the fallowing are games ive been having issues with. -Clustertruck -Mr President -Timberman -Paranotical Activity The issue with these games is that when you run these games they open a configuration window which is basically only used to set controls and display. Although it pops up every time and you have to click play to actually launch the games. This is an issue due to the fact that I'm building a custom system with hyperspin that doesnt require any input from a mous…
Last reply by Spawk, -
- 0 replies
- 101 views
Had Hyperspin pumping along for a good 6 months then the shortcut & .exe file just stopped working. Games all still working thru Rocket Launcher tho, just not getting the frontend working anymore Any ideas folks??
Last reply by Ballsrus,
-
Popular Contributors
