Support
Having problems with HyperSpin? You've come to the right place!
4,032 topics in this forum
-
- 2 replies
- 156 views
Hi all If im the only one then weird but normally you guys know or have seen this issue lol. When i use the second keyboard controls on hyperspins main menu the control works but when i go into the system and scroll through games tapping W or S (player 2 keyboard up and down) the list jumps 2 or three games. I have tested this with a keyboard and xpadder for player 2 with all diffrent keys and cant seem to find a fix. Any help is greatly appreciated.
Last reply by DOYOUEVENFADC, -
- 6 replies
- 260 views
Hey guys I got atari 2600 and 7800 running easily with retrorarch... however 5200 wont run? I run a game and it just stays on HS. In RL all games show fine etc.....any suggestions? [code] 22:06:32:220 | RL | INFO | +N/A | Main - RocketLauncher v1.0.1.4 (www.rlauncher.com) 22:06:32:230 | RL | WARNING | +16 | Main - You have "Logging_Log_Command_Window" enabled. This is only for logging errors being dumped to the command window from an executable. This may cause issues with running some executables and needs to be turned off when you are done. 22:06:32:540 | RL | INFO | +312 | Main - System Specs: RocketLauncher Dir: E:\Rocketlauncher Rocket…
Last reply by d8thstar, -
- 9 replies
- 224 views
Hi Guys Still bumbling my way through this! I've managed to get Daphne working and all the games going ok when I use Daphne Loader, but when I audit the games in RL, a few of them show up as not working and (obviously) won't load in RL or HS. The problem games are: Cobra Command Galaxy Ranger Road Blaster When I try to run them I receive this message: Cannot find Daphne framefile "cobraab" in any Rom_Paths provided: "C:\HyperSpin|Emulators\Daphne\vldp" with any provided Rom_Extension: "txt" I note that for these three games the name RLUI has for them (cobraab, galaxy and roadblaster respectively) and the respective txt files that I have are named di…
Last reply by Spawk, -
- 1 reply
- 97 views
is it possible to set a default genre? For example I want to have action games selected when entering in mame instead of All Games. thanks
Last reply by Yeuxkes, -
- 1 follower
- 7 replies
- 140 views
Hi guys I'm trying to set up Daphne and in the tutorial I'm following (pincade on yt) the guy is playing about with the modules folder in his hyperspin folder. I don't know much about this so I'm just following step by step and then I noticed that my HS doesn't actually have a modules folder, let alone all the info that belongs inside it. Do I have to procure this folder or have I missed something? Thanks
Last reply by Skeeball_Fanatic, -
- 1 reply
- 85 views
I want to add some games to the favorites for the MSX system. I have added using L key. The favorites.txt was created in the database folder but when I want to see the favorites it returns to system main theme. What am I missing? thanks
Last reply by duh, -
- 1 reply
- 98 views
I have updated RLUI to the latest version since it always asking for update... But after doing the update I cannot launch anything. It says it cannot find F:\HyperSpin\RocketLauncher\RocketLauncherUI\Databases\MAME\MAME.xml THe settings are: [settings] Default_Frontend=HyperSpin [RocketLauncherUI] Path=.\RocketLauncherUI.exe RLUI_Plugin=Auto RL_Plugin=Default [HyperSpin] Path=..\..\HyperSpin.exe RLUI_Plugin=Auto RL_Plugin=HyperSpin What should I do?? Should I have to copy hyperspin database folder to rocketlauncher database folder?? In the previous version 1.0.0.3 it was working. thanks
-
- 3 replies
- 109 views
hi all, i am super new to HS, please be gentle i almost have my system up and running 100%, one of the big hiccups i have is the need to reassign buttons when an emu starts and, assign them back to 'standard' when the emu ends. i found an option in hyperHQ "startup/exit" but that seems to run at the start of HS (not emu specific) and when i exit HS (not exiting the emu). i have ultimarc product in my machine and i have the wonderful u-config all set up but i don't know where to put the call within HS. my previous FE handled this with pre/post emu command lines. any thoughts? thank you all.
Last reply by Metalzoic, -
- 2 replies
- 108 views
Hello, is it possible to reuse wheels in other system? For example, I have MAME with all its wheels, but now I'm creating a konami classics system and I don't want to copy all wheels to konami classics media folder. I could reuse the videos setting [video defaults] path= in the settings ini file. Is there a setting for reuse themes and wheels? thanks
Last reply by rastan, -
- 2 replies
- 129 views
Good morning on this last day of the year ;-) Hope everyone's getting prepared for a wonderful New Year's Eve. I have a question. I've set up my MAME and Hyperspin perfectly fine. Now headong over to CD games, so I need Daemon Tools I've got the Daemon Tools 10.2 Lite but all the setup instructions I can find add SCSI drives, to it etc. Basically, the UI looks totally different than before. Can anyone help me? I think I'm stuck with the DT10 version as I'm using Windows 10 on my machine. I'm trying to set everything up but I'm unsure as I don't even see a "virtual" drive in the explorer (haven't mounted an image yet). Would be great if som…
Last reply by flyer6, -
- 0 replies
- 61 views
hey guys, i have an ipac 2 setup and when i load hyperspin i can only use 1 button for enter, 1 for genre, 1 for favorites etc.. i just wanted to know if its possible to have more then one button set for enter, as i want all my push buttons to work as enter as i have a seperate button for exit already and i dont want to have a button for genre and favorites, thanks dekiii
Last reply by dekiii, -
- 0 replies
- 79 views
Hey guys im new to hyperspin and the forums. I have followed simply austins video to set up hyperspin 1.4 with rocket launcher. Im finding it really useful upto a certain point where im stuck. when i launch my rocket launcer i have a list of 20 default emulators with global at the top of them. However i cant see any emulators or information in the right menu. I deleted the brackets for my global in settings as instructed on the video but on the video it shows txt and emulator information in the right panel when mine appears blank? any fixes i can do without starting the whole process again? thanks hyper
Last reply by Hyperspinman, -
- 1 follower
- 1 reply
- 102 views
Hi. I'm done setting up my MAME and everything is working so far, except HiScore and the HLSL Filter. I've set up the HLSL filter with copying some images and hlsl filter over to my mame folder (in the designated subfolders) As soon as I change the global settings in Rocketlauncher UI in the modules to HLSL, and the mame tab to HLSL true, too... mame crashes. I can't start any games. it just crashes. Is there a way to get the "best looking" crt scanlines effect, maybe without all the files copying, etc.? I'm using MAMEUIFX 0.167 Hope you can help me. Thanks. EDIT: Again, I've narrowed down my own faults... Reinstall direc…
Last reply by eli517, -
- 3 replies
- 97 views
I am trying to use hyperspin a bit unorthodox. I want to create a simple mortal kombat wheel. So far i have 5 games that launch from the main wheel, and removed all the default(mame, nes, sega, etc) here is my hyperspin>databases>main menu> main menu.xml <menu> <game name="Mortal Kombat" exe="true"/> <game name="Mortal Kombat II" exe="true"/> <game name="Mortal Kombat 3" exe="true"/> <game name="Ultimate Mortal Kombat 3" exe="true"/> <game name="Mortal Kombat 4" exe="true"/> </menu> if i go into hyperHQ wheel settings, all the sub tabs say "this tab does not apply to executable only Main Menu item…
Last reply by rastan, -
What is the best way to replace/config a new SSD drive for my Hyperspin arcade machine? It currently has an old 3.5" 2tb drive. I'd like to install a 2.5" SSD 256gb maybe a 512gb SSD. I'm running Windows 7 Professional. Thoughts?
Last reply by BlueGoblin, -
- 3 replies
- 95 views
Hi guys. I just finish reinstalling my HS from the lastest download with Mame. I have 2 main issues that i have with the same roms that was working previously. 1. Some games runs in a VERY fast pace....like Fast-Forwading a VHS tape. 2. And some games the volumes are much lower than others. 95% of my roms are in WinRAR files. Don't know if that matters.
Last reply by heykool69, -
- 0 replies
- 88 views
hi can anyone help me setup jukecade on hyperspin rocketlauncher
Last reply by mik, -
- 9 replies
- 230 views
I have been slimming down mame for quite some time now. I keep a version of mameui handy to test games from. If I don't think it worthy of my wheel then I simply delete that rom. I then use the "roms only" option to filter in HSHQ. This gives me an option of easily restoring the game just by dropping the rom back in. For most games I am happy with just having the parent rom. In this case I would rather not have puckman show up on the wheel at all but if I delete it, pacman no longer works. Is there an easy way to do this? Is that what the <enabled> tag is for the xml? Can I just set puckman to false and pacman would still show up and work?
Last reply by Spawk, -
- 0 replies
- 95 views
I have HyperSpin running on Windows 7 64bit. As this is in an arcade cabinet, I wanted everything to be contained inside of HS. Several years ago, I wrote a .Net Application that has a web browser object that receives it's URL from reading a file (rom). This was for the purpose of playing Pandora Radio without needing to exit HS and launch a browser window. This worked great until my hard drive crashed, and I can't find a backup of my HS. Today: I have HS 1.3 installed, and have added my custom app back into Emulators. I have the AHK and INI files created, and have the 'roms' setup in the database. If I execute: c:\HyperSpin\Emulators\Hyper-Pandora\Hyper-…
Last reply by jctel, -
Ok, so I've been using Hyperspin for a LONG time. I recently decided to set up my cabinet from scratch because so much has changed since I started and I'm tired of band-aiding new updates - I wanted to start from scratch. First off, BIG thank you to Simply Austin for all his tutorials, and mega downloads. Ok, so now my issue. I have everything mostly working, but one problem I haven't fixed is that when I hit the button to launch a game, the wheel instantly moves up one to show the game above the one I picked. The game I picked launches fine, but behind it, hyperspin starts playing the video for the other game. I think this is related to this issue https://www.reddi…
Last reply by timekiller, -
- 2 replies
- 151 views
I was looking for some good advice, I can't seem to get something that matches the roms correctly. I've tried every rom renamer on the site except for the python script and nothing seems to work over 70%. Dons renamer seems to be the best, but missed about 20-40% over the roms, even when the name appears like it should match. Hypermatch looked good, but crashes whenever I click on "fuzzy match" with a .net error. Hyperspin ROM manager works almost as good as Don's, but it only matches around 50% of the roms. Turmatcher is just unpleasant to use with popups, etc. and false matches. Is there one i'm missing?
Last reply by rastan, -
- 1 follower
- 1 reply
- 105 views
Hiya, I am having issues with retroarch, on all systems. When I start a say a SNES game the screen isn't sized right, so I resize it and save it. Then I go into the config folder and change the name from bsnes-balanced_libretro-1.cfg ro bsnes-balanced_libretro.cfg. This is the core I am using and when I click for windows to sort based on last modified these are the two most recent. When I restart a game, the screen is the same size again. E
Last reply by newoski, -
- 2 replies
- 117 views
Hey guys, I've just started up with HyperSpin a day ago and it's rekindled my interests in emulation. I was watching the video series created by Simply Austin and I got HyperSpin 1.4 to run as well as RocketLauncher. i installed Dolphin v. 4.0.2 (the most recent STABLE version) and it works perfectly by itself (I can also run it through HyperLaunch if that means anything). However it wont run through HyperSpin or RocketLauncherUI. P.S. - Before anyone asks I've tried using the version of Dolphin that the module was created for, still no luck. P.S.S. - When I start up RocketLauncherUI it seems as though RocketLauncher doesn't start along with it and when I try…
Last reply by YuSmites, -
- 2 replies
- 100 views
Having a weird issue with Fade settings and Hyperspin. When launching a game using RL directly, it shows the system name in the top left while loading. Testing reveals that the file it is showing is the system.png wheel file in the Hyperspin>Media>Main Menu>Images>Wheel directory. When I launch a game via Hyperspin, the image file doesn't show at all. All other items on the Fade screen seem to appear correctly. Any ideas?
Last reply by harleyguy, -
- 1 reply
- 89 views
Hi, Hyperspin works perfectly, but the video of games or emulators, load them in 15-10 seconds late. The sounds load immediately but after 15 seconds, the videos load (synchronized with the audio). I have a quad-core, 8GB ram and arcade vga 5000. The virus-shield is COMODO and I put both hyperspin.exe that rocketlauncher.exe that their folders as exclusions. Video downloaded from EmuMovie with HyperSync What can I do?
Last reply by SempaiKato,
