Support
Having problems with HyperSpin? You've come to the right place!
4,038 topics in this forum
-
- 0 replies
- 186 views
I was hoping there might be an IPAC expert out there in the Hyperspin forums. Here is my weird issue: My IPAC is all hooked and it tested great, I played some pacman to ensure all was right with the world. Now things aren't, sometimes the controls work great and other times not so much. When I say they don't work, the keys assigned to the buttons seem to change or just stop working. A great example is right on the joystick turns into Tab. Erica
Last reply by ArcadeGirl, -
- 3 replies
- 810 views
Hello everyone! I am having an issue where when I launch GroovyMame from a command line, it selects the correct video mode, like this: But when I launch it via HyperSpin, it selects a semi-random res, like this: In my mame.ini, I have "refresh_dont_care 1" and "lock_system_modes 0" set, so that's not it. I also posted this on the GroovyMame forums, but haven't gotten a reply yet. Though soemone here may have some insight! Thanks!
Last reply by vincefaro, -
- 1 reply
- 137 views
I was modifying the mame XML file, everything was going well, but after modifying the last game, in the log file it says this: 05:35:37 PM | HyperSpin Started 05:35:37 PM | Going windowed mode 05:35:37 PM | Checking for updates 05:35:37 PM | Update Check Complete 05:35:37 PM | Startup program unavailable 05:35:37 PM | Error intializing joysticks 05:35:37 PM | Menu Mode is multi 05:35:37 PM | Loading Main Menu.xml 05:35:37 PM | Main Menu.xml successfully loaded 05:35:38 PM | Main Menu wheel loaded successfully 05:35:39 PM | Loading MAME.xml 05:35:39 PM | MAME.xml is invalid 05:35:39 PM | ERROR IS Error #1085 Any ideas what error 1085 is?
Last reply by volumetric, -
- 1 reply
- 203 views
Ok i built a bartop arcade using my old laptop running xp. It is a old one and runs hyperspin ok. I deleted all the systems but mame for a real arcade feal. But i need a old mame module for my romset .139. My laptop wont run ewer versions of mame because of the graphics card. My .139 runs every game i need it to and it use to work on older versions of hyperspin. Does someone have the older mame modules so i can get this to work?
Last reply by fishman, -
- 3 replies
- 187 views
How can I chose which games to display as for instance in Mame? I went into the database directory for mame, opened the XML, and for the games I do not want shown I changed "yes" to "no" in enabled, but the games are still shown on the wheel. For instance, I want Pacman to be shown only, and not Puckman even though its the parent rom. Also how can I change the order of the games? I'd like to put together all the Pacman games (Jr, Ms, etc).
Last reply by Yeuxkes, -
- 2 replies
- 239 views
New day new problem , I followed a Youtube video from Austin to install the Amiga which all works great until I try to use the 360 controller. Its there in the config but wont work in the game, I tried to change the config to a keyboard but it seems to go back to the none working 360 controller everytime. Maybe the WinUAE is not compatible with windows 10 yet. My question is is there an easy way to configure the controller in WinUAE or failing that is there a different emulator for the Amiga? Thank you
Last reply by unkelo, -
- 3 replies
- 195 views
Nintendo Wii wheel will not show in my main menu... I have double checked the name and it is Nintendo Wii. I do not understand, I have tried a PNG file from a another system that I know works and it still does not show up? Also I would estimate every time I restart HS Mugen does not show? weird? Any suggestions
Last reply by demonseed, -
- 0 replies
- 159 views
Hi All, Apologies if I have posted my inquiry in the wrong forum. I have gotten most of my Emulator wheels up and running on my first Rocket launcher install (thanks to Simply Austins great Youtube Tutorials). I'm now in the process of trying to add Media wheels and was wondering if anyone on here has managed to install a wheel that can run Apps from the Program files/ WindowsApps folder? Thanks in advance! Graham
Last reply by GrahamKenny, -
- 0 replies
- 194 views
Hi guys I have just configured the ZINc emulater and it works fantastic I have mapped all controller settings in 1.9.5\ZiNcGUI.exe But when I run ZiNc through Hyperspin none of the buttons work I have made sure I have saved settings in 1.9.5\ZiNcGUI.exe if anyone has any idea's it would be great thanks in advance.
Last reply by keithpaw, -
- 0 replies
- 186 views
So I've been working on this computer with Hyperspin & Kodi off and on for a year now. I'm almost done except for conquering the issues with Project 64 in Super Nin. I see that Hyperspin and Rocket ll Launcher both have updates. I assume I would have to reinstall, and start all over. my question, is it worth it? Will it fix issues with Project 64 and other issues, or should I just keep going it's what I have so far? It's just a little discouraging thinking of starting all over again and reinstalling it. thank you for all input in any advice :-)
Last reply by Husky0628, -
- 1 reply
- 145 views
Hi from France ! I've just noticed that when I exit a console or handheld game, videos aren't shown anymore. It doesn't happen with MAME, just with console and handheld systems I have in Hyperspin. I use v1.4 and HyperLaunch 2.25c. Can someone help ? Thanks.
Last reply by James West, -
- 3 replies
- 182 views
Hi all When I access a Game via hyperspin the wheel moves by one notch onto the next game on the wheel and that game plays in the background (I can hear the wheel spinning on demo mode) any ideas ? thanks
Last reply by keithpaw, -
- 1 follower
- 9 replies
- 255 views
Good afternoon, Hyperspin requested an update , I did and now appears this msg . Q every time I enter a system and select a game , it appears . I could not solve Cannot Find J:HyperSpin\RochetLauncher\RochetLauncherUI\Databases\AAE\AAE.xml
Last reply by SIMPLYAUSTIN, -
- 1 follower
- 6 replies
- 225 views
I have a big problem now... When I start HyperSpin I just get a totally black blank screen after the intro video and nothing happens... Looks like HyperSpin loads but doesn't show anythin on screen. I only thing I can do is using CTRL+SHIFT+ESC to stop the Hyperspin.exe process. I can normally run games from RocketLauncher withou any problem. I didn't get too much info from the log file: 05:33:55 PM | HyperSpin Started 05:33:55 PM | Going FullScreen 05:33:55 PM | Checking for updates 05:33:55 PM | Update Check Complete 05:33:55 PM | Startup program unavailable 05:33:55 PM | Error intializing joysticks 05:33:55 PM | Menu Mode is multi 05:33:55 P…
Last reply by Konamito, -
- 1 reply
- 157 views
I noticed this first when using I was using the gameboy advance emulators... on exit I would notice the TASK BAR and I would have to do a quick switch to desktop and back to HS to get HS back to full screen on top of my desktop/taskbar. Today when I started playing with the RL bezels for mame I noticed on exit from mame.. HS didn't restore back to full screen and the TASK BAR was visible once again (I should note that when I use the MAME builtin bezels.. HS fully restores like it should on exit from MAME) Any help on this would be appreciated.
Last reply by rastan, -
- 4 replies
- 216 views
I'm using MAME for my Neo Geo and I have went into settings and set the bezel model to use Rocket Launcher bezels. Right now NEO GEO is still using the mame bezels for NEO GEO but I want Neo Geo to use the bezels I have in Rocket Launcher (the actual Neo Geo bezels for the games). How can I get mame to stop using the mame bezels and use the Rocket Launcher bezels? I can't figure out what I'm doing wrong. Like I said bezels show up for mame and neo geo but they are the mame builtin bezels and I don't want them for NEO GEO and while I have some nice ARTWORK for mame I would like to use the default MAME bezel in Rocket Launcher.
Last reply by rastan, -
- 1 follower
- 4 replies
- 170 views
Hi all, I'm getting choppy sounds using mame or mame64...but if I use MAMEUIFX64 to play the same games..the sound is fine (not choppy)...so is something going in within these HS build? do i need to change the sound settings? I'm using mame/mame64 from HyperSpin 1.4 (41 Systems) v1.04
Last reply by cudencuden, -
- 2 replies
- 197 views
Hi guys, I recently installed HyperSpin on an old computer my mate gave me and I noticed immediately that even though I am using my usual monitor, the screen looked darker than my other pc and also that text looks really jagged around the edges. For example, the white exit font of HS, where it says "would you like to exit? yes no" looks like rubbish instead of smooth like before. I know this isn't directly HS related, but if somebody has any idea how to fix this, I'd greatly appreciate it as I am at my wit's end. I've tried looking for a solution myself for hours, but no luck. I am thinking that maybe it's a video card driver issue, so I might update the drivers o…
Last reply by Runnin Blue, -
- 12 replies
- 206 views
I am by no means a noob, but this simple problem has always alluded me, on certain games or systems if you pause for a moment and it begins to load it locks out input for a second or two and I cannot move again until it has fully loaded and sat there for a moment and then I can move again freely and as fast as I want but then if I pause for a moment I have to wait again until I can move up and down again, it feels very cumbersome and not at all a smooth experience, any and all insight into why this is happening will be greatly appreciated. ps I have a dual core i5 I dont think that this is a power issue it doesnt behave like a power issue or like lag more like hyperspin f…
Last reply by smpetty, -
- 2 replies
- 170 views
Guys i havent got a clue whats going on...the only thing i did this morning was update the modules for RL.. Most systems i go into and launch the game the game video window now appears slightly to the left of my screen and the bezels dont appear in game.. When i go to exit the game,for a split second the bezel appears and then the game exits... So Mame/konami/SNK Neo Geo etc all the games start fine but are not in centre of screen nor in any bezel... yesterday it was fine
-
- 1 follower
- 6 replies
- 207 views
hey guys, quick question.. how can hyperspin show clones under mame? For example if you have multiple street game versions, but it only shows one in the wheel.. any idea how to change that? Thanks!
Last reply by wesfranks, -
- 9 replies
- 289 views
I had asked in the past for a database for WII/WII ware gems that supported classic controller, but is there a way to have those plus those games that you can play with the wii remote sideways? (without any motion stuff)? I am not sure hwo this would be done. Jim
Last reply by demonseed, -
- 0 replies
- 183 views
Does anyone know what my music video or movie .ini file should look like with additional file extensions? For example......This will launch the file successfully: [exe info] path = C:\Program Files\VideoLAN\VLC\ rompath = E:\Music Videos\ userompath =true exe = vlc.exe romextension = avi BUT, this will not: [exe info] path = C:\Program Files\VideoLAN\VLC\ rompath =E:\Music Videos\ userompath =true exe =vlc.exe romextension =avi, mp4, mpg, mkv, divx, wmv, asf, vob Thanks, ACE
Last reply by ACE, -
- 3 replies
- 156 views
does no one have a fix? any help would be great Thanks.
Last reply by rastan, -
- 2 replies
- 181 views
I use Xpadder.... just wondering if it's possible for me to load a specific profile for individual games and emulators? For example when I launch WinUAE I would like it to use my AMIGA keymap profile... and when I launch something like Dreamcast I want it to load my keymap profile for Dreamcast. For the most part I can just use one profile for all my emulators and Taito type X games but when I launch Amiga and a few others like PC games I need them to use their own key mapping. Right now I just manually do it but if there is a way to automatically have the profiles switch and return back to a specific profile.. that would be great. Hopefully my ramblings made sen…
Last reply by rastan,
-
Popular Contributors
