Support
Having problems with HyperSpin? You've come to the right place!
4,031 topics in this forum
-
- 12 replies
- 210 views
I can launch M2 games outside of RL fine...they load very fast. But in RL they always crash the program? for 7z option I have it set to True and use global..then in settings I have by Skip checks: rom extension...with out this checked it said the rom extensions were not valid. Any help?
Last reply by doyoudesign, -
- 3 replies
- 116 views
Hi I'm having problems with Hyperspin 1.3.3. When I launch the initial animation runs and I hit a key to bypass it. Then when I get to the main wheel it just begins to spin out of control. If I am lucky enough to get into one of the systems... then the next wheel (list of games) just begins to spin out of control. This exact setup has worked in the past with no problems. Any ideas?
Last reply by Agrajag, -
- 14 replies
- 518 views
In HyperHQ I know I can check show parents only, but unless something changed last time I checked that removed some of the games that even though are clones play or behave totally different from parents enough so to justify to leave them in the main list, there is also issue that different games have different origin and parent not necessarily is the one I would like to keep like Puck-man immediately comes to mind. Last but not least I don't want any mahjong or fruit machines polluting my HS. How Do I customize it? I heard I could use Don's Hyperspin tools, but I just looked at the website and it says it no longer supported and last release is dated from somewhere around…
Last reply by gr0bda, -
- 4 replies
- 140 views
Hello Everyone, Not sure if anyone else has gotten the error window pop when trying to load any MAME game through HyperSpin. I've attached a picture of the message. If anyone can explain what to do or point me in the right direction, I would be very grateful. Cheers, Ryan.
Last reply by mikty, -
- 8 replies
- 211 views
Can't find anywhere how to achieve this. I would like to keep windows and HS on SSD C:\ drive but of course due to limited size of SSD I'd like to link the media to another drive. How can I do it? Which ini to alter (if any)? I have HS 1.3 with RL 1.0 If you going to link to something please point out to the part that deals with that specifically not a 2 hours long setup video that the step I'm looking for is buried somewhere at 1h 39min and I'll miss it because I'm snoring by then. I have a goldfish attention span and I'll zone out before I'll ever get there. Thank you!
Last reply by dsync89, -
- 2 replies
- 109 views
I have Kega Fusion as my emulator and everytime i run it it says update ahk only i cant find it anywhere
Last reply by kobanokillape, -
- 1 follower
- 0 replies
- 90 views
Hey Guys I installed Bluestacks for Android games, and have been testing it. I have an xbox 360 PC wireless pad and wondered is there a app or something to configure it? or is it per game basis? The pad is found but I can not seem to see how to configure it.. any tips? thanks jim
Last reply by demonseed, -
- 1 follower
- 6 replies
- 140 views
Hey Guys... RL is so temperamental!!! with 1.3... Mame worked now issues again! I am so frustrated since the update as 1.3 and RL causes issues as 1.3 still looks for Hyperlaunch. The transition does NOT work for every emulator and I have to manually go in and edit things.. I spent 3 hours yesterday getting over 40 systems set up, they all worked.. now it crashes? Should I just bit the bullet and get 1.4 do a clean install so I know RL and 1.4 are compatible? Of should I go back to 1.3 and hyperlaunch?? I can confirm mame works OUtside of RL. I also did not have any issues prior to trying the below. Also I have been testing and it seems its only Mame causing issues I hav…
Last reply by gigapig, -
- 1 follower
- 4 replies
- 214 views
Hi everyone! I'm following GigaPig's guide on youtube to try to setup this system. Now, I'm stuck in the PCLauncher settings editor: I do all the steps in the video, but when I want to try one game throw HyperLaunch, it run Fade (Now Loading screen) then a white screen, and then the game exits and return to the editor. I dont know what the problem is. The games are from the internet, I''ve downloaded the setup from DJVJ's folder in FTP to add the hacked files. I'm running WinXP SP3, with all the updates, Visual C++ 2005,2008,2010; DirectX 9c, NetFramework 1.1, 2.0; 3.0, 3.5 and 4.0. This is the log from HyperLaunch... Any ideas? Regards!
Last reply by DR9, -
- 1 follower
- 36 replies
- 400 views
these are in MESS .160 each game (entex electronic baseball 1, 2, and 3) is a separate system in MESS but I tweaked the module to have each system show up as a game all on the same wheel not fancy but im ok with it ill share when im done edit: FINAL VIDEO HAS REPLACED ORIGINAL VIDEO
Last reply by dougan78, -
- 13 replies
- 84 views
Hi i have a problem with hyperspin when loading a mame rom, when i select a rom from the wheel it just freezes and i cant select nothing else i have to close it in task manager any one have any ideas thanks this is my hyperspin log 03:53:28 PM | HyperSpin Started 03:53:28 PM | Going windowed mode 03:53:28 PM | Checking for updates 03:53:28 PM | Update Check Complete 03:53:28 PM | Startup program unavailable 03:53:28 PM | Playing intro video 03:53:36 PM | Error intializing joysticks 03:53:36 PM | Menu Mode is multi 03:53:36 PM | Loading Main Menu.xml 03:53:36 PM | Main Menu.xml successfully loaded 03:53:37 PM | Main Menu wheel loaded successfully…
Last reply by pil196, -
- 2 replies
- 108 views
Hi, i have a little probleme with my hyperspin beta 1.4 after make my xpadder configuration. I do not know if the beta version of hyperspin is the cause of this problem. my navigation with xpadder in hypperspin works good, i can select a game and play with it. But when i'm exit the game Hyperspin seems to pass in the background and all my windows element (folder, firefox window etc) pass to foreground so I am forced to reduce everything manually. Do you know this probleme ? can ou help me? Thanks in advance and sorry for my bad english.
Last reply by Dunk3000, -
Hi there, I have been following Simply Austin's Tutorials for setting up the hyperspin, hyperlaunch and rocketlaunch applications. I have it so that I can get to the Roms in the hyperspin program...but if I try to start one, it will not run. The ROMS works great in the Rocketlauncher UI program and also RocketLauncher. It does not NOT launch in the Hyperlaunch program either. And recently whilst trying to fix the issues I've been having, i have been receiving the Start Module error. Just trying to get it so that i can get the front end working good with the rest of the stuff. anything that any of you guys can help me out with would be most …
Last reply by ZeBeDee32, -
- 8 replies
- 1.8k views
I've just installed Windows 7 64-bit onto my PC. HyperSpin had been working perfectly on XP prior to this... When I launch HyperSpin, even after a fresh install of both Windows 7 AND HyperSpin, it appears to run fine... However, when I press enter on the keyboard, HyperSpin just resets itself back to the main wheel, and if I try to exit HyperSpin, using the Escape key, it pauses HyperSpin. Pressing Esape again, resumes it! This has completely baffled me, so much so, that i even reinstalled windows thinking there was a problem with the keyboard drivers... EVERYTHING is default. I have just extracted the HyperSpin install .rar to a folder on the C: so as not to confu…
Last reply by bentowny, -
- 7 replies
- 176 views
Guys when you load a game and have the fade effect screen on, where in the hs structure Ido I change or edit loading screen? What are they called, where do I get them? Thanks Jim
Last reply by mikty, -
- 1 reply
- 62 views
Hello to all members. My name is Daniel and I live in Brazil. I am an electrical engineer. After some research, I was blown away with the world VP. I've always had a strong desire to buy the Twilight Zone pimball. After watching many VP of videos, I decided to pluck up courage and put together a machine to me. I would like to apologize for my English mistakes, but my enthusiasm is so great, that I will not be able to mount an excellent machine without the help of all of you. I would like some suggestions and indications of where to buy some components such as: LED-Wiz, I-PAC, digital plunger. Are these components are used today? Is there anything better? What is the best…
Last reply by oren, -
- 1 follower
- 11 replies
- 196 views
Hey everyone i spent countless hours waching videos and trying to setup hyperspin and this problem has got me stumped. To my understanding i have rocketlauncher running corectly but instead of looking for /sethings/Emulators.ini it is seaching for GameName/emulators.ini for each indivial game it changes the folder name. Trying to use RetroArch on SegaGenesis. If i open RocketLauncherUI.exe and select sega genesis from the left panel then selec emulator i have RetroArch as the default emulator and when i go to games refresh the game list i can click on a game name and the rocket icon and the game launches and plays in retroarch fine. it just wont open via hyperspin…
Last reply by shaunalvarez, -
- 2 replies
- 118 views
Just wondering how to launch videos, and then exit them back to hyperspin, using joystick controls on an arcade cab..? Or using the ESC Key
Last reply by tonycrew, -
- 0 replies
- 131 views
Im using a ipac4 to controll my arcade cabinet but would like to add in 2 xbox 360 controller's for those 4 player or games that need all the buttons what's this best way to do this? I do have xpadder that I purchased when i was using the xin-mo board before the ipac. Sent from my SM-N910P using Tapatalk
Last reply by mikea213, -
- 0 replies
- 96 views
hi, I just notice that Hyperspin disable windows (win7) standby (screen and computer). How can I Keep them activate ? I use hyperspin for a cabinet who will be left powered 24/24, so I'm very afraid that the computer will died in short time :s Thx
Last reply by jimbo19, -
- 1 reply
- 112 views
Anyone have a idea why on my Mame wheel if I goto astroids the screen goes black and I have to use task manager to close out hyperspin but if I goto atari classics which is using the same rom file and video its fine? Sent from my SM-N910P using Tapatalk
Last reply by Agrajag, -
- 2 replies
- 131 views
Hoping some one can help me out here Im lost. I have been running Hyperspin for about 2 months and I had a Xin-Mo with xpadder setup to Nav thru hyperspin. I just switched to a Ipac-4 and I cant for the life of me fig how to set it up to work with Hyperspin. I have it working fine in MAME using the default programming but no control in hyperspin. I was using the startup scrip. All the buttons output keyboard commands.
Last reply by mikea213, -
- 7 replies
- 134 views
Hello all I am trying to set up hyperspin on my son's new computer. I have set up 3 other computers in the house and have no problems with them. When I set it up on him and on one of mine it will not go past the main menu. When I choose a game system it flashes and goes back to menu with out giving the game list, Like its not finding the .xml files to load here is a copy of the log file from one of the computers I am having problems with. 02:00:10 PM | HyperSpin Started 02:00:10 PM | Going FullScreen 02:00:10 PM | Checking for updates 02:00:10 PM | Update Check Complete 02:00:10 PM | Startup program unavailable 02:00:10 PM | Playing intro video 02:00:28 P…
Last reply by volumetric, -
- 1 reply
- 72 views
Only beginning to set up Hyperspin with Mame right now....Is there a way I can switch between the main wheel with all my games & custom wheels I can create (If that's possible)? Like for an example, old local arcades I grew up with, have a couple menus/wheels where I can just add games that they had back in the day show up to select from, and also maybe have a custom image in the background?? I would also like to sort all games by genre, havent used MAME in a long time either, but thought this was possible Can custom fonts be used for the text in the bottom display that lists the name of the rom, "press start" & "jump forward"? & finally is there …
Last reply by stevaside, -
- 1 reply
- 79 views
Hey Everyone! I'm building a 4 player arcade and I'm currently running windows 8 64 bit. Software wise I'm collecting all the roms and emulators right now. Am I going to be OK using windows 8 or should I switch to another os? I just don't want to get too far and realize I should've went a different route. Thanks!
Last reply by dougan78,
