Support
Having problems with HyperSpin? You've come to the right place!
4,028 topics in this forum
-
- 6 replies
- 152 views
I recently had my hard drive crash and had to start from scratch on rebuilding my box. :/ It seems that some things have changed and I am at a loss trying to remember how to set up the menu displays. I have boxart in the artwork2 folder, and I've tried 1,3, and 4 for the cartridge art, but nothing happens. Where am I going wrong?
Last reply by helltick1, -
- 9 replies
- 146 views
When using Mess and having bezels on, the game screen is squashed....and smaller than the bezel? this doesn't happen on any other emu's is this a bug..?
Last reply by tonycrew, -
- 1 reply
- 99 views
Brand new to Hyperspin, just in the stages of trying to customize things & set it all up. I have managed to get 90% or so of the themes I need for my roms, but I've been having some trouble trying to just use a simple image (say flyer or something) as a theme for the games I don't have. I was advised to make an XML file called theme.xml & write <theme> in the first column & </theme> in the second, save image I want to use to background.png & zip it. What's happening so far is I can see the image in backrgound when I go to game in wheel (not centered though), but dimmed out with a "XML error cancelling theme" message over it..If I move the wh…
Last reply by stevaside, -
- 0 replies
- 45 views
I having problems getting hyperspin to work on my arcade legends machine, ive changed out everything got hypersin working on it, but when it loads the screen(an arcade screen) is not working,iam also purchased an ultimarc card, please if anyone can point me in the right direction on fixing this problem
Last reply by rubgut, -
- 2 replies
- 52 views
I did a new cab build and transferred my completely working Hyperspin system into it. I could not enter any subwheels. Screen would fade then go back to main menu. Did a fresh install of an OS and Hyperspin/Hyperlauch/Hypersync Used Hypersync (note that I did not on my other Hyperspin install). Went through normal hyperspin/hyperlaunch setup process (followed guide here on forums) Setup MAME with a custom XML list that has mature filtered out and other such things. Checked system with hyperlaunch, works perfectly, can launch anything. Launch hyperspin and still the same problem not being able to get into subwheels/systems. Any help? Pl…
Last reply by Circo, -
- 7 replies
- 131 views
Hi all Thais look simple.. i have set my roms path to the correct path.. Any help please .. You cannot have a Rom Path set to the same path used for your 7zExtractPath otherwise your roms may be deleted: E:\HS\Emulators\Sega Model 2\roms Stephen
Last reply by spotty001, -
- 2 replies
- 212 views
I'm trying to figure out how to map my ps3 controller to work with Hyperpause. I have xpadder. I don't use it for anything at all right now. I use the start up script to control hyperspin. I've tried searching and tried various methods to try and get this to work. Can someone help? also maybe if there is a way to make xpadder read the xbox guide button. Please and Thank You.
Last reply by slagram69, -
- 1 follower
- 20 replies
- 533 views
Can I leave my PlayStation 2 games as ISO's in 7z or do I need to extract them
Last reply by oldhag270, -
- 3 replies
- 137 views
My mame is working perfectly. My dreamcast emu - not so much. First problem is that even though I configured my tankstick to work in the config menu of the emu (Null DC - I press the button on tankstick and it's assigned), in game, something is off. Only a few buttons respond. Then when I try to launch it in hyperspin, only one game shows up and it doesn't work (even though hyperlaunch has been assigned to the right paths - exe is right in the ini and so is paths). My model 2 emu is working perfectly too - exception is when I exit, the resolution is off but I can live with it. Any suggestions guys?
Last reply by delt31, -
- 8 replies
- 198 views
Hey, little confused so gonna see what the experts say! I am currently using HS 1.3.0.0 with HL2. I haven't updated for a while for fear of anything going wrong with updates to both HS and HLHQ, but now we are reverting to HL2 as standard am i safe to update? I have over 100 wheels and bucketloads of emu's so any issues would be a total headache. Any thoughts?
Last reply by MisterC21, -
- 5 replies
- 160 views
Brand new HS user here so please bear with me. I have set up a few systems that are already on the wheel with hypersync (NES, SNES, MAME, Genesis). I'd like to add one that isn't on there already and theme it up. I can't quite figure it out. I can add, for example, Atari Jaguar but there's no theme or anything. Can somebody guide me through setting up Jaguar and setting it up with a theme and stuff with hypersync? Once I know how to do that, I should be able to add any other ones I want on my own. Thanks
Last reply by thegh0st81, -
- 14 replies
- 18.4k views
"Hey there! Have you found yourself wondering "Friggin' Xpadder, how does that stuff work?". Well I will try to walk you through the process of setting it up for use with your shiny new HyperSpin setup! There's a great tutorial on the KeyMapper function in the HyperLaunch 2.xx thread that competently explains how to go about setting that up but I'll summarize some of the points I see people missing a lot: -In addition to all of your system named profiles you also need one named "Hyperspin.xpadderprofile" in your Keymapper folder or you'll error out when coming back to HS from a sytem where you had to switch profiles. -You do need to have Xpadder started before HS if …
Last reply by potts43, -
- 1 follower
- 4 replies
- 108 views
I have just installed the nulldc everything worked great even through hyperlaunchHQ but when I tried to run a game through hyperspin I got this problem... When I select dreamcast it doesn't go into the game wheel it just reboots back into the main game system menus again =/ Btw I have tried a search but the thread seems to be missing from the forum now, so don't crucify me. It's my first post on here so be gentle haha! edit.. I just realised that this might be in the wrong section, feel free to move it.
Last reply by Gambino147, -
- 1 reply
- 57 views
Does the new hypersync work with windows xp 32? and does it work with emu movies correctly? good into to know before i go ahead and get access. thanks!
Last reply by Gerurver, -
- 3 replies
- 86 views
When I try and launch a game through hyperlaunch or hyperspin I get the following message/image please see link or image provided http://postimg.org/image/yp72um0gp/ I have tried renaming the folders in my rom path multiple times with no results.. Other system on my hyperspin are using the same emus and working fine... Not sure what to try next any advice or answers would be helpful..
Last reply by goofers, -
- 4 replies
- 151 views
Hello I'm update MAME to 0.160 This update add new games but when I launch HyperSync Loaded don't add new "GAME BOXES" , why?? For example, don't add box game for "puzzlove" that is a new game that I added thanks
Last reply by cronox, -
- 0 replies
- 53 views
I am a first time hyperspin noob and have encountered an odd issue. Hyperlaunch can read my rom paths just fine however hyperspin cannot. I have however (even though I shouldn't be) been moving the files around quite often. I fully understand that this shakes hyperspin up something awful. My brothers and I are working on getting a cabnet setup though and I want to be able to take the files to his house and show him whats happening. I have been up and down the forums and google looking for help and have personally checked rom paths in HyperHQ and Hyperlaunch. Any ideas out there?
Last reply by Xzanos, -
- 8 replies
- 350 views
I been playing with hyperspin prior to the 3 release now I even more confused. I have HS running on 2 Pc's and some things are just not quite right, I have teamviewer for anyone that wants to see what mess I have created and really need to know the basic hardware and software needs for a basic mame setup. I have mame install disks I purchased but I think they will only be good for the roms, correct me if i'm wrong. there are many builds of the mame software.
Last reply by cotyce, -
- 1 reply
- 86 views
Hi Amstrad people, just wondering did anyone manage to get 2 player controls configured in this emulator? The emulation for the GX4000 is fine, but under the input, I can only configure for player 1, no mention for the 2nd player setup. I am guessing this is not an option with this emulator? Thanks Lads.
Last reply by djsim, -
ccd/img files? 1 2
by Capa- 25 replies
- 699 views
So I downloaded a few sets at PD The Sega CD and Panasonic 3do I having a pain trying to get these to load in retroarch or fusion or fourdo. I feel like I just end up downloading and downloading useless files. Is there a way to covert these? Or get these running? Thanks.
Last reply by marxkemp, -
- 1 reply
- 76 views
hi i have installed a fresh new copy of hyperspin with latest firm ware. every time i play a game in mame after 20 30 seconds it goes to hyperspin and runs mame in the background. i have tried mame 149 150 157 160 still same problem. tryed all of theses on the old hyperspin and the new one same problem on both. i am using the vertical hyperspin iv used it before with no issues. i tried it on the dip switch cock tail and rotate image 90 deg still kicks me out! iv tried it with out touching any settings still kicks me out. iv even updated the hyper launch with git and still same problem any help would be great thanks
Last reply by jrose1184, -
- 2 replies
- 97 views
It seems sometimes the wheel art don't show but when i go into the wheel and come back out it's there, anyone know why..?
Last reply by tonycrew, -
- 1 reply
- 85 views
Ok i've created an XML with different games from different systems, there are some Master System and Some Genesis games on the list, i then went into HyperLaunch HQ and added them in the Alternate Emulators List selecting the game then the Emulator then the System all look fine, The Games.ini in the newly created wheel looks fine. But none of the games launch from hyperspin..? is there something i need to do in HyperHQ apart from the Rom Extensions..? or is there something else i need to do in HyperLaunchHQ..?
Last reply by tonycrew, -
- 2 replies
- 78 views
trying to change the key from esc to 4. i can remove the esc but cant capture the 4 or any other letter or number
Last reply by jrose1184, -
- 3 replies
- 98 views
could any one please tell me how to remove the text writing on the right hand side please
Last reply by SIMPLYAUSTIN,
-
Popular Contributors
