H4CK3R Posted February 16, 2012 Posted February 16, 2012 (edited) Just got my DMD and my USB device from Russ.... All I can say is, WTF why didn't someone come up with this along time ago... Here is a Photo, will make a Video soon... If you want one Hit him up on the VPforums and or I'll post a link to his website once its done. It's at http://pindmd.com/ 7CLeNvS0Fn0 PEjc0qXmERs H4CK3R Edited March 18, 2012 by H4CK3R adding 1 [sIGPIC][/sIGPIC] I'm what you call an Expert....Don't try this at home!
bill55 Posted February 16, 2012 Posted February 16, 2012 (edited) WOW. That looks great. Is there any special setup or is it the same config as what everyone uses now? I saw that thread recently. but didn't get a chance to read up on it much. What did the whole setup cost you? I know from having to buy DMD's for pins that they are not cheap. How does this work though considering not all DMD's are the same size? Most are, but I know Sega had some larger ones and I'm sure there are other exceptions too. Edited February 16, 2012 by bill55 My Pinball Build: Indiana Jones and the Pinball Crusade
H4CK3R Posted February 16, 2012 Author Posted February 16, 2012 The orange DMD cost me 300 for the 5 Volt, the dongle is 75 plus shipping... Worth every penny... [sIGPIC][/sIGPIC] I'm what you call an Expert....Don't try this at home!
chriz99 Posted February 16, 2012 Posted February 16, 2012 that looks very nice! awesome! cheers chris [sIGPIC][/sIGPIC] * taito egret 29 candy cabs * indy & star wars pachinkos 17" bartop with ledwiz rgbleds * 10" bubble bobble & galaga bartop * arm champs 2 check out hi-res backglasses * best vpin performance * ledwiz config and software
mameman Posted February 16, 2012 Posted February 16, 2012 looking good, gonna look and bundling russ's board with a display and speaker/dmd panel. can't wait to get mine PM me for any custom CNC needs. Find me on Facebook.. Xtreme Pinball or www.xtremepinball.com Ipad pinball cabinet iFlipper Here: See the Doctor Who build Here.... / See the Tron build Here.... / See the BattleStar Galactica build Here.... See the Big Bang Bar build Here.... / See the Twilight Zone build Here.... CNC Work Here.....
H4CK3R Posted February 16, 2012 Author Posted February 16, 2012 YP2gDGpXnPg [sIGPIC][/sIGPIC] I'm what you call an Expert....Don't try this at home!
ebarlow99 Posted February 16, 2012 Posted February 16, 2012 i got my hands on a dmd made by cherry..does anyone know if this would work?? http://www.bartop-arcades.com
bill55 Posted February 16, 2012 Posted February 16, 2012 I'm definitely interested. What happens on those handful of games that had larger (and I believe higher res) DMD displays? Do they work at all? I'm going to get my cab going with the existing 15.6" LCD, then I'll consider the upgrade after that. Don't want to throw another unknown variable into the mix right now. My Pinball Build: Indiana Jones and the Pinball Crusade
H4CK3R Posted February 16, 2012 Author Posted February 16, 2012 By the time you get the DMD and the Dongle most of the bugs will be worked out. And their are only 5 games that have the higher res 128 x 64, Baywatch, Arron spelling, ect ect.. He's converting the Pinmame.DLL to re-size those DMD's to fit the 128 x 32 [sIGPIC][/sIGPIC] I'm what you call an Expert....Don't try this at home!
Takedown Posted February 16, 2012 Posted February 16, 2012 Pretty freaking sweet. Thanks for the video. What are the dimensions of the viewable area of the DMD? (want to make sure if I do this later my DMD panel will work)
mameman Posted February 16, 2012 Posted February 16, 2012 i got my hands on a dmd made by cherry..does anyone know if this would work?? only if you power it with a pinball power supply and power board, it will likely need 100,50 and -5 (or something like that) PM me for any custom CNC needs. Find me on Facebook.. Xtreme Pinball or www.xtremepinball.com Ipad pinball cabinet iFlipper Here: See the Doctor Who build Here.... / See the Tron build Here.... / See the BattleStar Galactica build Here.... See the Big Bang Bar build Here.... / See the Twilight Zone build Here.... CNC Work Here.....
pixelmagic Posted February 16, 2012 Posted February 16, 2012 It look very nice, almost real But i will probibly wait for the RGB version [TABLE=width: 500] [TR] [TD][/TD] [TD=align: center]New project homepage: http://blog.pixelmagic.nl/[/TD] [TD][/TD] [/TR] [TR] [TD][/TD] [TD=align: center]LED-Wiz utility: http://pinball.pixelmagic.nl/ledwiz/[/TD] [TD][/TD] [/TR] [TR] [TD][/TD] [TD=align: center]Anyone want to buy my LEDwiz ?? [/TD] [TD][/TD] [/TR] [/TABLE]
maxxsinner Posted February 16, 2012 Posted February 16, 2012 Why do I get the feeling your not telling us something pixel??? If only this was the right size......... Electropin - Enough lights to land a jet on an aircraft carrierHigh Voltage Pinball - Cause one build just wasn't enough Voltek Arcade - Funglo pedestal style mame cabinet Pinball Electrical Tutorial - Wire All Your Bling With Confidence and Fewer House Fires
JaronSenna Posted February 16, 2012 Posted February 16, 2012 (edited) haha, that would require 8 of those, maxxsinner. At $80 a piece get you a DMD 30.4" by 7.6" for around $640. Would go well with a 65+" playfield... Edited February 16, 2012 by JaronSenna my pincab build thread
gbeef Posted February 16, 2012 Posted February 16, 2012 FREAKING AWESOME!... im down for one of these when they release info? My Cabs My Pin Cab Attack of the PINZ cab My Racing Cab OutRun Racing
sacredgaming Posted February 16, 2012 Posted February 16, 2012 http://www.futureelectronics.com/en/Search.aspx?dsNav=Ntk:PartNumberSearch%7cLEE%2f-128G032B%7c1%7c,Ny:True,Nea:True,N:4294938476 this place has both orange and red 5v
JaronSenna Posted February 17, 2012 Posted February 17, 2012 FWIW: just stumbled upon this site: http://colordmd.com/ seems like they are about start production on multicolor dmd's my pincab build thread
chriz99 Posted February 17, 2012 Posted February 17, 2012 colordmd is a lcd-screen and only for one dedicated pinball machine suitable. cheers chris [sIGPIC][/sIGPIC] * taito egret 29 candy cabs * indy & star wars pachinkos 17" bartop with ledwiz rgbleds * 10" bubble bobble & galaga bartop * arm champs 2 check out hi-res backglasses * best vpin performance * ledwiz config and software
JaronSenna Posted February 17, 2012 Posted February 17, 2012 Really, basically the same that cab-builders here have been doing for some time? I did see it is an LCD panel, but since I read that dmd's are/can be plasma-based display technique, I figured it would be like "real" dmd technology... ok, pardon the n00b interference :-) colordmd is a lcd-screen and only for one dedicated pinball machine suitable. my pincab build thread
njay Posted February 17, 2012 Posted February 17, 2012 what if we together bought those dmd's from veshay maybe we can get a discount somewhere? My Mini Pin Build: http://www.hyperspin-fe.com/forum/showthread.php?t=5622 My Arcade Bartop Build: http://www.hyperspin-fe.com/forum/showthread.php?t=14570
JaronSenna Posted February 17, 2012 Posted February 17, 2012 (edited) what if we together bought those dmd's from veshay maybe we can get a discount somewhere? If not, you (and other dutch vpinheads) may get one from here: http://flipperwinkel.nl/winkel/index1.html (then click Electronica, then Displays) Not sure if it is a good price or not though. You can pick it up from their location and not risc damage while shipping... Edited February 17, 2012 by JaronSenna my pincab build thread
pinball2883 Posted February 17, 2012 Posted February 17, 2012 i want one are they available yet? Just about to start a build Hyperlaunch 2.24 Windows 7 64 Bit Intel Core i3-2120 3.3Ghz EVGA GeForce GTX560 4 TB 8GB of Ram
sacredgaming Posted February 17, 2012 Posted February 17, 2012 i put up a link on last page for dmd's here in us
njay Posted February 17, 2012 Posted February 17, 2012 If not, you (and other dutch vpinheads) may get one from here: http://flipperwinkel.nl/winkel/index1.html (then click Electronica, then Displays) Not sure if it is a good price or not though. You can pick it up from their location and not risc damage while shipping... I don't think this is the 5v version ... but the normal plasma display which requires power supply that deliveres other type of voltages My Mini Pin Build: http://www.hyperspin-fe.com/forum/showthread.php?t=5622 My Arcade Bartop Build: http://www.hyperspin-fe.com/forum/showthread.php?t=14570
pinball2883 Posted February 17, 2012 Posted February 17, 2012 is the controller available? Hyperlaunch 2.24 Windows 7 64 Bit Intel Core i3-2120 3.3Ghz EVGA GeForce GTX560 4 TB 8GB of Ram
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now