Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,053 topics in this forum
-
- 0 replies
- 66 views
I know this has to be easy, but as I was playing around with my emulator settings, and now one of the wheels has every game twice. The both have wheel images, and they both launch. Both seem to be named the same. I can not for the life of my figure out why only this system has doubled up. Am using Hyperspin 1.5.1.0, and Rocketlauncher 1.2.0.1
Last reply by therock12, -
- 2 replies
- 102 views
Trying to setup Kega Fusion again on a new PC. Copied the files from my old system, but now When I try to exit Fusion by pressing the escape button it doesnt. Have the same ahk as before, same version of emulator. Only thing that is different is I upgraded to a newer version of HyperSpin. Any help would be much appreciated. Mame, NES, SNES all work fine
Last reply by therock12, -
- 5 replies
- 172 views
Hi, all. I'm very new to this and am trying to get MAME 215 installed and running through Hyperspin. First the background: 1. I have hyperspin set up and working with several systems, including MAME 151 (which I downloaded and used years ago on another computer and have a large rom pack), NES, SNES and Playstation 2. 2. I installed MAME 215 in a separate folder within the Hyperspin Emulators folder (D:\HyperSpin_151\Emulators) like I did with all the other emulators 3. I have MAME 215 running games standalone. 4. Within RocketLauncherUI, I selected the MAME system on the left and selected the Emulators tab on the right. Added a new Emulator call…
Last reply by mikea213, -
- 1 reply
- 92 views
How can i get my mame games and my sega naomi games all in 1 favorits folder so there all in the same place so i dont have to keep going on the system then selecting favorites any help will be aporiciated thanks
Last reply by rastan, -
- 1 follower
- 5 replies
- 115 views
ugh. so I lost my computer like a year ago, lkids work and etc and I have finally rebult a new one. So.. New computer, old hard drive from old computer. installed new hyperspin and copied all files from old to new. The wheel justs SPINS... esc key does nothing, I have to CTRL ALT DEL out. So I unzipped HS to another folder and just ran it FRESH. looks great. So I gotta figure that out. BUT, my Control Panel doesn't work, the trackball does of course, but nothing in mame, and for the life of me I cant remember what to do. I think there was an ini file I copied. Its been SO LONG since I did any config. I cant even get the up down left right keys to work in mame…
Last reply by Firebat138, -
- 0 replies
- 82 views
Hi Guys, I've finally managed to get a good set of n64 roms that i'm happy with but have encountered a strange problem with project64. The sound wasn't very good and the image quality was shocking with the standard plugins so I did a bit of research and decided Shunyuan's HLE Audio 1.8.2u1 Audio Plugin would give me good sound quality so downloaded it and it was excellent. The next issue I addressed was the picture quality for which I downloaded Angrylion's RDP Plus r8 Plugin Which gave me excellent picture quality. Now the fun begins. When running both of these plugin's on their own with the default option for the othe…
Last reply by ceason87, -
- 1 reply
- 87 views
Anyone have a module for xenia? trying to find one right now that can work with recent builds.
Last reply by Creezz67, -
- 3 replies
- 87 views
Hi all, Thanks in advance for viewing my issue. I recently added 3 systems to my set via rocket launcher - pc engine, c64, Vectrex and for some reason the names are repeated in the main system menu but without the themes just the blue default text. I have checked the database files and tried deleting and re-installing each set but the same thing keeps happening! Any ideas gratefully received
Last reply by vaningo, -
- 1 reply
- 120 views
I bought a DC to USB adaptor so l can use DC controllers, flight stick. I watched a video how to set it up which included binding keys in Nulldc and then testing through Rocket Launcher. The first time l tried to test a game in RL it flashed up a warning to the effect that l had to create a profile for DC to USB in xpadder. How do l go about doing that. My machine was bought as a bartop. The bindings arent correct for the button layout, however as l want to use the DC controller lm not to worried about that just now. To get the controller to work l have to exit HS, as it boots straight into it, then reselect the DC to USB mode in nulldc then select game in RL. Help would …
Last reply by dc240969, -
- 2 replies
- 123 views
Hi guys, I have an old problem and a partly solution for it. I´m just missing a little part for totally smooth behavior. First --> I dont use Rocketlauncher. I´m just using Hyperspin, the emulator and maybe AutoHotkey for solving this. I have Kega Fusion 364 starting from HyperSpin and it works like a charm. Now i want to exit. My Exitcommand is pressing 1 & 2 (P1_Start and P2_Start) simultaniously (instead of the common exitEmulatorKey = Esc). After this, the emulator is closed, hyperspin is showing up and moving for 1 second, than its freezing and after ~10 seconds its reactivating and moving on. To make a faster reactivation i can click the left m…
Last reply by Shauku, -
- 0 replies
- 55 views
ALGUIEN SABE COMO PONER DOS SISTEMAS QUIERO ISTALAR DEVIL MY CRY PERO UNOS JUEGOS SON DE PS2 Y OTROS DE PC COMO CONFIGURO LOS 2 SISTEMAS GRACIAS
Last reply by KRATOSKALEL, -
- 1 follower
- 2 replies
- 90 views
Hello all. When I was playing Turtles in Time with my sons and wife we would inadvertently push a button combination that would send us out of HyperSpin. I am guessing this is due to the default button mapping that is setup for MAME. Is there a Button mapping out there that someone has used that is MAME friendly as well as other platform friendly? If this topic has come up in the past please put the link in and I will be happy to read it. I have looked and I guess my search criteria is not the kind of buzz words that I should be entering. Any help would be greatly appreciated. Thanks again guys! Mike
Last reply by 32assassin, -
- 0 replies
- 68 views
Hey, everyone! I've been watching the arcade and emulation scene since Mike Cuddy's emulators. After all this time, I'm finally finishing my dream MAME and Friends cabinet! The other day, I was bouncing around on various sites, and I glanced at a program that lets you configure many sets of controls for games in MAME at once. For example, I could bulk configure all of the 4-way/one button games in one fell swoop. However, I failed to bookmark it, and I can't seem to find it in my history. Does anyone have a clue as to what the name of this program might be? Thanks for any help!
Last reply by Fragholio, -
- 0 replies
- 75 views
Hi friends. I have a problem with the dreamcast emulator Redream. If I launch it through Hyperspin choosing a game (for example Soul Calibur that is in .zip file) savegames is not working. I completed the game I watched the tipical message like "game saved successfully" and then I pressed ESC on keyboard to exit game. If I start the game again savegame doesn't exist. But if I try to do the same executing the emulator without hyperspin it works fine. Does anyone know how to solve it? Thank you in advance.
Last reply by Ozone3, -
- 0 replies
- 80 views
Hi Guys, Years ago I had this issue. Years ago I fixed it. Can I remember what the fix was? NOPE. Basically I start AAE and it runs fine. I can play games and everything is happy. but when I use ESC and close the emulator the EXE leaves an overlay on the screen of some sort. If I screen shot with the PC that picture is normal when pasted into Paint. But the screen looks like this: If I open aae.exe again the emulator still runs perfectly. If I open Task Manager and kill the exe then my screen stays perfect. Anyone remember the fix?
Last reply by Polemicist, -
- 3 replies
- 79 views
Conheço o Hyperspin à volta de 2 anos , achei brutal a maneira de apresentar os emuladores, os graficos brutais, principalmente para um entusiasta de Arcade ! Comprei finalmente uma caixa de Arcade e tenho quase tudo a nivel de Hardware... Agora o pc que tenho guardado corre o hyperspin, mas nao me deixa selecionar, pensei que era configuração e ja perdi horas as voltas, decidi colocar o mesmo disco no meu portatil , sem mexer em nada... e funciona tudo 5 estrelas!!! O meu portatil é um i5 da primeira geração com 8gb de RAM e 1GB dedicado de Grafica (ATI). O pc é um dual core, com 4 gb de RAM e 512GB Grafica dedicados Alguem sabe qual a r…
Last reply by Goncalo, -
- 5 replies
- 118 views
Hello friends, I'm new to this hyperspin stuff and I'm trying my best but been looking all over for a solution to my problem with no luck. I’m using Final burn alpha on rocket launcherIU for my CPS systems and everything runs great and smooth through rocket launcher but when I test my cps1 roms on hyperspin they doesn’t load; hyperspin tries to launch them but then I get back to the desktop. (if anyone knows about this issue please help) Thank you very much!
Last reply by monoantropoide, -
- 2 replies
- 103 views
Hello all. If this topic has come up several times I apologize. I had the MAME interface working in HS about 3 days ago. Now I am getting an error that states: "ahk.class MAME. I just want to know if I should try to find and re-download the AHK file for MAME, or do I go into the AHK file and change the EmuV: = "0.166" to ".212"? Or am I going down the wrong rabbit hole? Please let me know. Thank you.
Last reply by Penfold, -
I've been trying to use runasdate to launch a game from PC launcher in rocketlauncher without much luck,any idea how to set this up? the link the program provides runs perfectly fine when clicked on,but errors pop up when using it through rocketlauncher
Last reply by Honosuseri, -
- 2 replies
- 84 views
Is anyone able to get this game to work in HyperSpin? Every time I try to launch it I get an error message saying it can't find a .bin file in the HyperSpin cache. It's the 1995 game "D" for PlayStation 1, published by Acclaim, developed by WARP. Every other PlayStation ROM I've tried loads except that one.
Last reply by Creezz67, -
- 2 replies
- 135 views
Hi all I'm can't find a proper hyperspin xml mame list for 0.139 for working roms. I managed to make one via the built in mame software but it does not have all the data such as year, manufacture, players, etc. Please can someone help!
Last reply by 32assassin, -
- 1 follower
- 10 replies
- 224 views
Has anyone successfully got this working ? and with all the roms ? Just upgraded RetroAch and I have all the artwork, vids etc but cant seem to get the roms to load
Last reply by gigapig, -
- 0 replies
- 72 views
Hi All My first post so apologies if this has been answered before but I can't find the answer! I'm running a slightly older verson of mame in Hyperspin. Mame 0.139 romset (2010). I have legacy mode and all is working fine with the help to tutorials and what I can find in the commuity forums. However, I struggling to impliment the scanlines and effects to give it the old school look. Can someone help and advise! Many thanks in Advance! Slick8
Last reply by Slick8, -
- 8 replies
- 165 views
Evening I'm currently running (Mame 0.162 - split+chd) - all seems good but should I upgrade ? I seem to recall it being hard to get cleaned up when I did it 3 years ago but my memory is terrible. What do you think of 0.162 ? Should I upgrade ? What is the best Version ? Cheers
Last reply by griffin518, -
- 1 follower
- 1 reply
- 78 views
Sorry if this is a noob question. I installed Hyerspin & RocketLauncher about 4 months ago and installed MAME (I think v0188b). It was working great, no issues, games played fine and I built a Favorites about a month ago. Last week I installed Daphane and it was working fine (except RoadBlaster, I can play it directly through Daphne, but not from HS/RL.) Went to play a MAME game and I now get the message "Could not find your emulator\application: E:Emulators\MAME\MAME\MAEUIFIX .167 x64 NoNog.exe" I remember installing a NoNag version when I configured MAME, but I don't know what changed and when it's looking for .167 (?). Any help would be g…
Last reply by gigapig,
-
Popular Contributors
