Support
Having problems with HyperSpin? You've come to the right place!
4,028 topics in this forum
-
- 1 follower
- 2 replies
- 36 views
I had everything working fine in rocket launcher and hypetspin. I synced my media with hypersync and then started getting this error for every rom I try to Launch in Hyperspin "Cannot find D:\hyperspinModules\Sega 32x\sega 32x .ahk. You do not have the HyperLaunch 2 module for Sega 32x. Please create one of Check Hyperlist." This error comes up for each system I try to play through Hyperspin after using Hypersync. So I did a re-install of RoacketLauncher and hyper spin....had everything working fine AGAIN. Synced everything with Hypersync, and keep getting the same errors after using Hypersync again! Can anyone help? I'm about to give up on hypersync …
Last reply by gigapig, -
- 1 reply
- 48 views
I've finally hit a wall with my Saturn setup. I'm using Retroarch with the Mednafen core. While my games boot via the emulator itself and Hyperspin, saving does not seem to work with my zipped games. If I open them via the emulator unzipped it creates the proper files (saves to the ROM directory), however it doesn't generate a save when saved through the zipped game via Hyperspin. When attempting to adjust the Saturn module settings via RocketLauncher when tied to RetroArch leads to this prompt appearing: "Sega Saturn doesn't support specific settings on this module, you'll have to use global ones". Going to Global and editing the System Specific module only listed Atari …
Last reply by Rikua, -
- 1 reply
- 30 views
I am trying to recover my hyperspin system that has been away for a few months. I decided to do a clean install of rocket launcher and now none of the systems show up that were under the global tab. this has happened before but I don't know how to get it back. If someone could point me in the right direction I would appreciate it. thank you!
Last reply by BATTLEDONKEY, -
- 1 follower
- 3 replies
- 56 views
Having an issue with Demul70 emu, I'm setting it to full screen but when I launch a game the settings change to 640x480 windowed mode. anyone out there know what I can do to keep the settings I want?
Last reply by angryfruitsalad, -
- 1 follower
- 6 replies
- 114 views
Hello everyone! Recently bought/built a new Xtension Arcade Cab. Threw a superpowered laptop in, strapped on the control panel, and away I went! I already had a MAME set up on my other computer, so I ported it over. Here's my dilemma: I have all of the art and videos for a LOT of these games, but I'm missing ROMS. I don't care about them, I just care that I have a couple thousand extra pieces of art being displayed. I would LOVE to cut my XML down, but I cannot for the life of me figure it out. If I use Don's tools to generate an XML, I loose all of the good info and descriptions that Hyperspin displays at the bottom. Same goes for my other syste…
Last reply by admiralriker, -
- 4 replies
- 88 views
I have a weird problem with Main menu themes and the intro vids. I searched a good while but came up empty. I had some cinematic system themes, which I reverted back to the default main menu system themes. Tried deleting the 'old' sys. theme.zip and video and then updating with hypersync but still comes out not lining up (e.g. Nintendo Game Boy) Also tried different theme files (4:3), (16:9), different videos as well. Never had this problem before. Is there some .ini file somewhere that's keeping certain settings? Any ideas on why this is happening? thomas
Last reply by RetroHumanoid, -
- 1 follower
- 5 replies
- 65 views
Hello All. New to Hyper and loving it. I have a XML list that is working 100% with my rom directory. However, my XML list contains, as an example, 592 game entries and my rom directory 2000+. 1. Is there a tool I can export the actual roms based on the XML to a new directory? Now Im pushing my luck. The same as above, however now add the themes, vids and images and so on. This will really help in cleaning up rom directorys and getting rid of unneeded or broken roms. Regards Derik Pelser. Future Spinner
Last reply by steptoeUK, -
- 1 reply
- 60 views
Hello. I've been following the official video tutorials but obviously wrong because games are not launching. When I select a game, nothing happens. I've googled for the problem and nothing I have found has been of help. It's the same problem for all systems with different emulators. Some details: I use Windows 10 64bit Latest versions of Hyperspin and RocketLauncher installed. Roms have been audited with no problem. It's also can't start any game from HyperLaunch, but when I click on the red rocket button in RocketLauncher UI, it works. I've modified the HyperSpin settings file to include Hyperlaunch_Path=F:\RocketLauncher\RocketLauncher.exe (which …
Last reply by steptoeUK, -
- 0 replies
- 30 views
Hello, I think my last post got deleted for some reason so I'll try again. I have a game that loads perfectly in MAME .188 out of HS/RL but when launching in HS it gets up to the insert coin splash screen and then goes black after pressing the P1 start button. Are there any settings I can adjust to see if this works? I would have thought that running in HS or using the standalone MAME.188 wouldn't make any difference. Thanks.
Last reply by blutackey, -
- 0 replies
- 33 views
So i have a profile for my ipac 2 for Mame. It switches over to this profile when i enter mame but when i exit out to the hyperspin menu it doesn't switch back to _default. So my layout is messed up after i exit mame. To get it back i have to exit to the desktop and run WinIPAC to reset the controls back.
Last reply by kincaid76, -
- 0 replies
- 55 views
I recently shelled Windows 7 to skip the desktop and go straight into Hyperspin. Since shelling, Hyperspin runs great (preview videos load fine, the UI is responsive, etc.) except when I press Enter to launch a game, it takes 10 seconds or so before the game actually launches. Once in a game, the game runs great. I only have MAME games loaded so I'm not sure if the problem is specific to MAME or if it's universal. Does anyone have any idea why it would take so long to launch a game after shelling? EDIT: It actually seems to only be delaying on the very first game I try to launch. After that, the games seem to load fine.
Last reply by TheIronCheek, -
- 1 follower
- 7 replies
- 72 views
Hello, I'm pulling my hair out trying to figure out why my hyperspin sound is not working. No preview sounds or wheel sounds. All my media packs are in their respective folders. All of my emulators sounds work perfectly once I start a game? Any help would be greatly appreciated.
Last reply by gigapig, -
- 1 follower
- 3 replies
- 59 views
I'm using the Xtension "Emulator Edition" two-player board with trackball. The board seems to work just fine. And in fact, so does the trackball, outside of HyperSpin on my windows desktop. But as soon as I tick the use trackball option in Hyperspin HQ, things go bad. If I do that, and then launch HyperSpin, the wheel goes crazy. It just spins at like 1000 RPM. Totally out of control, to the point that I have to force the application closed. For what it matters, and just for extra info, I kept the sensitivity to 90%, just as HS HQ stock setting... would lowering the sensitivity help? Or is it another issue all together? It feels a bit sluggish at 90% as i…
Last reply by gigapig, -
- 0 replies
- 40 views
As the title states. Is it possible after selecting a game in hyperspin that it doesn't register input from key presses for a set amount of time? I am not using the fade function for some games so that is not a option.
Last reply by Sheep190, -
- 0 replies
- 44 views
Help please, I am in a battle with HS! Problem: I launch HS 1.4 and have no control of the menu from the joysticks (initially) but if I go out to JOYTOKEY and simply highlight any valid profile that has the correct ke mappings and then go back over to the HS instance that is still running I gain control but only until I navigate to a different sub-menu/emulator then I have to do the same thing again to regain control. I followed the tuts from HS, Simply Austin, and Game room Solutions to the Nth degree and triple checked everything but something is not right. My Joytokey profiles include: Hyperspin, RocketLauncher, and Profile 1 (All have the i…
Last reply by catslovedogs, -
- 0 replies
- 38 views
When I run roms either through rocketlauncher/hyperspin/emulator I get no sound; anyone know how I fix this? Cheers much Edit: figured it out, installed an ssd and a clean o/s and didn't install directx, all good now.
Last reply by angryfruitsalad, -
- 7 replies
- 98 views
Perhaps I made a mistake putting this in General rather than Support. My apologies if this is the case. My main hard drive had a Windows disaster and I had to run recovery software to jump ship to a new drive. Going through my HS systems to check for consistency has been the current project and PC Engine CD -refuses- to mount the disc for Magic Engine in Daemon Tools Lite 10.6. SCSI, no SCSI, add drive, don't add drive, it will. not. work. ...But Turbografx-CD does. It works perfectly, mounts discs all the bloody -live-long-day. I imported the pce.ini from one Magic Engine directory to the PCECD one, and it ignores it. Doesn't work. Brand new ini? Doesn't …
Last reply by dougan78, -
- 0 replies
- 28 views
Hi All With setting up my wheels there is the video location where the vids get stored for each wheel. Duh!!!! I have a few MAME wheels all using the same naming criteria as I'm just grouping some games together with different DBs So I don't want to copy my videos to various locations, as below C:\HyperSpin\Media\MAME\Video\ C:\HyperSpin\Media\MAME2\Video\ C:\HyperSpin\Media\MAME3\Video\ and so forth, you get the story. So I pointed all my wheels to one central location. lets say C:\HyperSpin\Media\MAME_Main\Video\ However, this does not work. And only works if I copy them in to the corresponding wheel folder even if m…
Last reply by DerikPelser, -
- 1 follower
- 8 replies
- 81 views
Yo spinners Planning to rename huge sets of PS2 roms, During the renaming process the roms must removed from original source once it is renamed and moved to another folder to avoid duplicates & double up the space. Which program can handle ?
Last reply by shitoken, -
- 0 replies
- 34 views
Hi all, Ive had Hyperspin setup for over a year now but I simply can't get it to remain stable for more than 24hrs.. it seems to lock up and become unresponsive after a undetermined amount of time. If I leave MAME active the pc remains stables for days on end but hyperspin in attract mode just seems to die after about 12 hrs. i have taken to scheduling a windows restart every day at 1am but it's still happening on occasion .. Any tips on getting it stable? When it locks up the CPU usage shows as 0% in use and 170MB ram in use so it's not a memory leak. I'm running Windows 10 Pro (but previously Win 7 Ultimate and still happens). Pc i…
Last reply by nintenjo, -
- 1 follower
- 6 replies
- 79 views
Greetings - Normally i would just try to figure this stuff out on my own, but I have found that it is just easier to reach out for help. I'm trying to get my Sega CD bin/cue's organized into compressed archives. I used to have a utility that would take the files out of the directory, zip them, place in a separate directory and name them properly. I can't seem to find that utility. I did this manually with a few, but it's going to take ages and I don't really want to spend the time on it. I've included screenshots to help illustrate what I'm trying to accomplish.Can someone else guide me to a quicker solution? How it is now(_zipped folder is ones that i have …
Last reply by badboo, -
- 0 replies
- 50 views
Hi all. Quick question for yas. I have a 0.166 mame.ahk file in my setup so am using mame32uifix 0.166 to compliment it and all works great in hyperspin. My only gripe is that i only have a 0.142 rom set so obvious some games dont work and I can't find a 0.166 rom set anywhere. My question is- is there a archive of mame ahk files so i can grab the 0.142 version to use with my roms and get a 0.142 version of mame or is there a program that will update/convert my 0.142 roms up to 0.166 to just copy into my existing setup. Thanks ever so much ?
Last reply by HulmieTT, -
- 1 follower
- 2 replies
- 67 views
Hey all, My usb fight stick works with everything except escaping mame. The esc button I have mapped through joy2key works in hyperspin and registers in joy2key but won't register in mame for "ui cancel". Any help would be much appreciated! thanks!
Last reply by MRDISCGOLFER, -
- 1 reply
- 50 views
Hello again spinners, I am having issues trying to cull my games down to just the ones within the hyperlist database. Normally I do this manaully but after a recent update I have some sets with 1000+ unneeded or double titles. I tried to use hyperchecker for the job as thats the software I use for sorting out media and it works awesome, unfortunately it doesnt seem to matter where I place my games hyperchecker cannot find them to scan. Does anyone have a better 3d party alternative to hyperchecker and if not does anyone know the "Official" directory that hyperchecker looks at for games. Cheers.
Last reply by Pwnography6, -
- 1 reply
- 48 views
Hi guys :0) hoping someone can help me with a error i get when trying to launch mame in hyperspin. I'm using the latest version and was chuffed to bits when i got Daphne working as i thought this would be the hardest to do. Then i moved on to adding my 2nd emulator. Sorry to say i am just fumbling around tbh. youtube etc. Now when i run a game in mame ( only 1 rom in there to keep things simple for now) i get the following error (see pici) and i haven't a clue ????? thing is i have an old version of hyperspin on another drive and the same mame works fine! although on that drive i can't see any rocketlauncher or hyperlauncher ????? Scratching my head now as this is all new…
Last reply by HulmieTT,
-
Popular Contributors
